免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 5456 | 回复: 4
打印 上一主题 下一主题

路由器总是莫名重启?请高手给看看是怎么回事!谢谢! [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2004-06-07 09:38 |只看该作者 |倒序浏览
========= Dump bp = 80D40A34 ======================

80D40934:        0    13D6C        0    13DC8 80D40384 80D41074 80B2F4D0
80D408E
C
80D40954:        0    22828     4270        0        0        0        0
0
80D40974:        0        0        0        0        0        1        0
0
80D40994:        0        0        0        0 CA6F0B0C D24E8D1A CF2E6A59
CF2E6A5
9
80D409B4:      405      405      747      747        0        2 60060000
0
80D409D4:        1 FFFFFFFF 80C138F4        0        0        0        
0     471
0
80D409F4:        0     C284 80D3E274 80D407D4 80B2F4D0 80D409A4        0  
5271E8
4
80D40A14:     4270        0        0        0        0        0        0
0
80D40A34:        0        0        0        1        0        0        0
0
80D40A54:        0        0 CA6F0B38 D24E8D1A 3D986158 3D986158      
8AE      8A
E
80D40A74:     1B58     1B58        0        2 60060000        1        1
FFFFFFF
F
80D40A94: 80C138F4        0 80D2B184        0        0    135F4        
0    1428
C
80D40AB4: 80D3F18C 80D3BFF4 80B2F4D0 80D40A5C        0  5279E8C     4270
0
80D40AD4:        0        0        0        0        0        0        0
0
80D40AF4:        0        0        0        0        0        0        0
0
80D40B14: CA6F0B2A D24E8D1A D3640302 D3640302      408      408      
35       3
5
========= Dump bp->;next = 0 ======================

========== Dump bp->;previous = 0 =====================

============================================


%Software-forced reload

Queued messages:
00:01:24: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console
debugging out
put.

00:01:22: validblock_diagnose, code = 7
00:01:22:
current memory block, bp = 0x80D40A34,
memory pool type is Processor
00:01:22: data check, ptr = 0x80D40A5C
00:01:22: bp->;next(0x0) not in any mempool
00:01:22: bp_prev(0xFFFFFFEC) not in any mempool
00:01:24: %SYS-3-BADBLOCK: Bad block pointer 80D40A34
-Traceback= 8019D554 8019F1D0 8071442C 8071C5D8 8071F630 807080C8
80708708 80316
658 803152F0 803154F0 8031564C 801BDC50
00:01:24: %SYS-6-MTRACE: mallocfree: addr, pc
80D40A5C,80714428 80D2BB98,802296B0 80D2BB98,40000016 80D2BA68,807113E8
80D2BA68,40000084 80D2BAEC,60000CEA 80D2BA68,80350244 80D2BC34,60000C46
00:01:24: %SYS-6-MTRACE: mallocfree: addr, pc
80D2BAEC,50000066 80D2BBE0,805E5B5C 80D2BC7C,60000C22 80D2BC34,805E5AFC
80D2BCE0,60000BF0 80D2BC7C,805E5A40 80D2BECC,60000AFA 80D2BCE0,500000B8
00:01:24: %SYS-6-BLKINFO: Freespace does not end at end of the pool blk
80D40A34
, words 0, alloc 0, Free, dealloc D24E8D1A, rfcnt 0
-Traceback= 8019AE04 8019D564 8019F1D0 8071442C 8071C5D8 8071F630
807080C8 80708
708 80316658 803152F0 803154F0 8031564C 801BDC50
00:01:24: %SYS-6-MEMDUMP: 0x80D40A34: 0x0 0x0 0x0 0x1
00:01:24: %SYS-6-MEMDUMP: 0x80D40A44: 0x0 0x0 0x0 0x0
00:01:24: %SYS-6-MEMDUMP: 0x80D40A54: 0x0 0x0 0x0 0x0

=== Flushing messages (00:01:26 UTC Mon Mar 1 1993) ===

Queued messages:
00:01:115964116991: %SYS-3-LOGGER_FLUSHING: System pausing to ensure
console deb
ugging output.

00:01:26: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:01 to ensure
consol
e debugging output.
Free space check for flash:crashinfo_19930301-000126 failed (-1/4952)

*** System received a SIGTRAP exception ***
signal= 0x5, code= 0x700, context= 0x80aed318
PC = 0x801b77f8, Vector = 0x700, SP = 0x80c63f18

System Bootstrap, Version 12.2(7r)XM1, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2001 by cisco Systems, Inc.
C1700 platform with 32768 Kbytes of main memory

program load complete, entry point: 0x80008000, size: 0x3ec328
Self decompressing the image :
#################################################
##########################################################################
######
##########################################################################
######
##########################################################################
######
##########################################################################
######
##########################################################################
######
############################################## [OK]

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.2(4)YA2, EARLY DEPLOYMENT
RELEAS
E SOFTWARE (fc1)
Synched to technology version 12.2(5.4)T
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Thu 11-Apr-02 21:54 by ealyon
Image text-base: 0x80008124, data-base: 0x807976DC

cisco 1721 (MPC860P) processor (revision 0x100) with 29492K/3276K bytes
of memor
y.
Processor board ID FOC064705MG (1738588167), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)



Press RETURN to get started!


00:00:05: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
00:00:06: %SYS-5-CONFIG_I: Configured from memory by console
00:00:06: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.2(4)YA2, EARLY DEPLOYMENT
RELEAS
E SOFTWARE (fc1)
Synched to technology version 12.2(5.4)T
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Thu 11-Apr-02 21:54 by ealyon
00:00:06: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a
cold star
t
00:00:06: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0,
changed
state to up
00:00:06: %LINK-3-UPDOWN: Interface Serial0, changed state to up
00:00:06: %LINK-3-UPDOWN: Interface Serial1, changed state to up
00:00:07: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0,
changed state
to up
00:00:07: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1,
changed state
to up

论坛徽章:
0
2 [报告]
发表于 2004-06-07 09:48 |只看该作者

路由器总是莫名重启?请高手给看看是怎么回事!谢谢!

路由器配置如下

Router#sh run
Building configuration...

Current configuration : 1254 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname Router
!
enable secret XXXXXXXXXXXXXXXXXXXXX
enable password xxxxxxxxxxxxxxxxxxxxxx
!
ip subnet-zero
no ip domain-lookup
!
!
!
!
interface FastEthernet0
ip address xxx.xxx.xxx.xxx (isp 给的IP) 255.255.255.248 secondary
ip address 202.111.11.126 (私网IP,不知道以前的网管为什么这么配???) 255.255.255.0
ip nat inside
no ip route-cache
speed auto
!
interface Serial0
description to-xxx
ip address xxx.xxx.xxx.xxx 255.255.255.252
ip nat outside
no ip route-cache
no fair-queue
!
interface Serial1
description to-xxx (点对点)
ip address 192.168.1.1 255.255.255.252
!
ip nat translation timeout 60
ip nat translation tcp-timeout 120
ip nat translation max-entries 100
ip nat inside source list 1 interface Serial0 overload
ip nat inside source static 202.111.11.130 xxx.xxx.xxx.xxx extendable
ip nat inside source static 202.111.11.6 xxx.xxx.xxx.xxx extendable
ip classless
ip route 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx
ip route 192.168.10.0 255.255.255.0 192.168.1.2
no ip http server
!
!
access-list 1 permit 202.111.11.0 0.0.0.127
snmp-server community public RO
!
line con 0
line aux 0
line vty 0 3
exec-timeout 0 0
password xxxxxxxxxxxxxx
login
line vty 4
exec-timeout 0 0
login
!
end

Router#

论坛徽章:
0
3 [报告]
发表于 2004-06-07 09:55 |只看该作者

路由器总是莫名重启?请高手给看看是怎么回事!谢谢!

是Software-forced reload
无法分配内存了。
查查网络上的病毒,或者把不必要的端口禁用

论坛徽章:
0
4 [报告]
发表于 2004-06-07 09:56 |只看该作者

路由器总是莫名重启?请高手给看看是怎么回事!谢谢!

NAT转换负载过重吧。

论坛徽章:
0
5 [报告]
发表于 2004-06-07 09:58 |只看该作者

路由器总是莫名重启?请高手给看看是怎么回事!谢谢!

[quote]原帖由 "chaowawa"] NAT转换负载过重吧。[/quote 发表:


如果是这个怎么解决。谢谢!
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP