- 论坛徽章:
- 0
|
如何知道H80机器上有几个硬盘及如何删除不正常的VG
执行rmdev -l scraid0 -dR
cfgmgr后报如下错误
Method error (/usr/lib/methods/cfgmscraid -l scraid0):
0514-047 Cannot access a device
why?
附件为errpt报告及prtconf报告,请大家指教
!
prtconf结果如下
System Model: IBM,7025-F80
Processor Type: PowerPC_RS64-III
Number Of Processors: 2
Memory Size: 2048MB
Good Memory Size: 2048MB
Firmware Version: IBM,M2P01208
Console Login: enable
Auto Restart: false
Full Core: false
Network Information
Host Name: wellko-f8
IP Address: 192.168.1.11
Sub Netmask: 255.255.0.0
Gateway:
Name Server:
Domain Name:
Paging Space Information
Total Paging Space: 2048MB
Percent Used: 1%
Volume Groups Information
==============================================================================
rootvg:
PV_NAME PV STATE TOTAL PPs FREE PPs FREE DISTRIBUTION
hdisk1 active 542 109 00..00..00..00..109
hdisk0 active 546 241 92..00..00..40..109
==============================================================================
INSTALLED RESOURCE LIST
The following resources are installed on the machine.
+/- = Added or deleted from Resource List.
* = Diagnostic support not available.
Model Architecture: chrp
Model Implementation: Multiple Processor, PCI bus
+ sys0 00-00 System Object
+ sysplanar0 00-00 System Planar
+ mem0 00-00 Memory
+ proc0 00-00 Processor
+ L2cache0 00-00 L2 Cache
* pmc0 00-00 Power Management Controller
+ proc2 00-02 Processor
* pci0 00-fff7f09000 PCI Bus
* isa0 10-80 ISA Bus
+ fda0 01-D1 Standard I/O Diskette Adapter
+ fd0 01-D1-00-00 Diskette Drive
* siokma0 01-K1 Keyboard/Mouse Adapter
+ sioka0 01-K1-00 Keyboard Adapter
+ kbd0 01-K1-00-00 PS/2 keyboard
+ sioma0 01-K1-01 Mouse Adapter
+ mouse0 01-K1-01-00 3 button mouse
+ ppa0 01-R1 CHRP IEEE1284 (ECP) Parallel Port
Adapter
+ sa0 01-S1 Standard I/O Serial Port
+ sa1 01-S2 Standard I/O Serial Port
+ sa2 01-S3 Standard I/O Serial Port
+ sa3 01-S4 Standard I/O Serial Port
* pci2 10-58 PCI Bus
+ scsi0 11-08 Wide/Ultra-2 SCSI I/O Controller
+ rmt0 11-08-00-0,0 SCSI 4mm Tape Drive (12000 MB)
+ cd0 11-08-00-1,0 SCSI Multimedia CD-ROM Drive (650
MB)
+ hdisk0 11-08-00-2,0 Other SCSI Disk Drive
+ hdisk1 11-08-00-4,0 16 Bit LVD SCSI Disk Drive (18200
MB)
+ scsi1 11-09 Wide/Ultra-2 SCSI I/O Controller
* pci3 10-5a PCI Bus
+ ent0 14-08 IBM 10/100 Mbps Ethernet PCI Adapter
(23100020)
* pci4 10-5c PCI Bus
* pci5 10-5e PCI Bus
* pci1 00-fff7f0a000 PCI Bus
* pci6 20-58 PCI Bus
+ ent1 21-08 IBM 10/100 Mbps Ethernet PCI Adapter
(23100020)
* pci7 20-5a PCI Bus
* pci8 20-5c PCI Bus
* pci9 20-5e PCI Bus
+ mg20 2D-08 GXT130P Graphics Adapter
* pci10 20-60 PCI Bus
* pci11 20-62 PCI Bus
+ scraid0 34-08 PCI 3-Channel Ultra2 SCSI RAID
Adapter
* pci12 20-64 PCI Bus
* pci13 20-66 PCI Bus
执行errpt大致结果如下
LABEL: SCSI_ARRAY_ERR2
IDENTIFIER: 1EB75C3D
Date/Time: Fri Jun 11 11:42:25
Sequence Number: 321
Machine Id: 000C83BD4C00
Node Id: wellko-f8
Class: H
Type: PERM
Resource Name: scraid0
Resource Class: adapter
Resource Type: 14102e00
Location: 34-08
VPD:
Part Number.................28L1004
EC Level....................E72376N
Serial Number...............00000000
FRU Number..................01K7396
Manufacturer................IBM000
Displayable Message.........CLRRAI
Diagnostic Level............03
Device Driver Level.........03
Loadable Microcode Level....3.70.16
ROS Level and ID............3.00.21
Description
ADAPTER ERROR
Probable Causes
ADAPTER MICROCODE
ADAPTER HARDWARE
Failure Causes
ADAPTER MICROCODE
ADAPTER HARDWARE
Recommended Actions
PERFORM PROBLEM DETERMINATION PROCEDURES
Detail Data
SENSE DATA
0000 0011 0000 0000 10EF 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
--------------------------------------------------------------------------- |
|