安装硬盘映射的问题

最爱文杰

我的机器配置是P4M1.4 256DDR G2MXGO的显卡分区第一主分区70m（fat)做引导w2000serve和dos6.22第二主分区安装w2000s(fat32)第三主分区安装linux9.0的引导分区/boot -100m(ext3)
第四主分区扩展分区里边有linux的/(ext3)挂载点和swap分区再就是一个fat32的分区用来放资料我在这个分区上面安装ppc（在2000下安装），我下载的是0.1版本的，3G的映射文件但是安装的时候出现如下问题：
这个问题应该如何解决啊？
是不是我的configfile文件有问题{# PearPC Configuration File

#
# Resolution
#       
#        0: 640x480x8 (indexed)
#        1: 640x480x15
#        2: 640x480x32
#        3: 800x600x8 (indexed)
#        4: 800x600x15
#        5: 800x600x32
#        6: 1024x768x8 (indexed)
#        7: 1024x768x15
#        8: 1024x768x32
#
#        The indexed modes are unsupported.
#       
#        default: 4
ppc_start_resolution = 4


#
# Redraw interval (in ms)
# must be between 1 and 999
#
# If you set this higher, PearPC will spend less time doing redraws (and so run faster)
# but feel less responsive. You should adjust this to your computer speed and personal
# preference.
#
redraw_interval_msec = 200

#
# Loader
#

#
#        Boot method
#          this can be
#          1. "auto", prom will boot the first bootable partition found (default)
#          2. "select", prom will show you a list of bootable partitions
#          3. "force", prom will load and boot the local file prom_loadfile
#
prom_bootmethod = "select"

# Example of how to use "force":
#prom_bootmethod = "force"
#prom_loadfile = "test/yaboot"
#prom_env_bootpath = "disk"

#
#        bootargs: don't change unless you know what you are doing
#        machargs: set to "-v" to get a verbose startup
#

#prom_env_bootargs = ""
prom_env_machargs = "-v"

#
#        This is needed if you want to boot Mac OS X
#

prom_driver_graphic = "video.x"


# This will adjust the position of the initial page table (don't change)
#page_table_pa = 104857600

#
# CPU Config
#
#        Processor Version Register
#        Defaults to 0x00088302
#        Only change if you know want you are doing
#
#cpu_pvr = 0x00088302


#
# Main memory (default 128 MiB)
# must be >;= 64 MiB
#
#memory_size=0x10000000

#
# IO Devices
#

#
#        PCI IDE Config
#
#        Drive type will be set according to file extension:
#                .img: Harddisk (filesize must be multiple of 516096)
#                .iso: CD-Rom
#        Or you can override this by specifying the type via
#        pci_ide0_master_type / pci_ide0_slave_type

pci_ide0_master_installed = 1
pci_ide0_master_image = "mac.img"
#pci_ide0_master_type = "hd"

pci_ide0_slave_installed = 0
#pci_ide0_slave_image = "c:\test.iso"
pci_ide0_slave_image = "/home/sepp/prog/pearpc.res/test/isos/MandrakeLinux-9.1-CD1.ppc.iso"
#pci_ide0_slave_image = "/dev/cdrom"
pci_ide0_slave_type = "cdrom"

#
#        Network (unavailable on windows)
#
pci_3c90x_installed = 0
pci_3c90x_mac = "de:ad:ca:fe:12:34"

#
#        USB
#
pci_usb_installed = 1

#
#        NVRAM
#
nvram_file = "nvram"

}