A900 2000主控如何解决？

lihongg0384

我的机器从01 B N 起总是报A900　2000但不影响使用，我查过手册说可以通过某些方式解决，但写得不是很清楚，不知哪位高手遇到过类似的问题，请赐教。

ANTENTER

老弟，没改console model吧！
不是3486吧！：）

kevinbi

System reference code (SRC) A900 2000 recovery
If no workstation on your server is operational, follow these steps:

Use the control panel to change your server IPL to manual mode.
Use the power pushbutton on the control panel to force power down on your server.
Perform an IPL on your server.
Sign on as QSECOFR.
On the IPL or Install the System display, select option 1 (Perform an IPL).
On the IPL Options display, specify Y for the Define or change the system at IPL prompt.
On the Define or Change the System at IPL display, select option 3 (System value commands).
On the System Value Commands display, select option 3 (Work with System Values).
On the Work with System Values display, type QIPLTYPE in the Position to field.
In the Option column for the QIPLTYPE system value, type 2 (Change).
On the Change System Value display for the QIPLTYPE system value, type 2 (Attended IPL, console in debug mode).
Press Enter. You see the Work with System Values display.
Press F3 twice to return to the Define or Change Your System display.
Press F3 (Exit and continue IPL) to continue your IPL.

kevinbi

System reference code A9002000
Possible reasons you received system reference code A90002000:

If the system displays this SRC code, it usually means that a console was not found.
The iSeries system value QAUTOCFG must be set to ON. OS/400 is unable to create the new console device if it is off.
If you just migrated the console from one type to another and the new console fails to work in OS/400 you may need to use another workstation to manually delete the controller and device description associated with the old console device.

kbazy

进DST 选5 ，2，6进入改为相应的终端模式确认，重新IPL 试试。

kbazy

楼主,问题解决了吗? 给个消息!

lihongg0384

已经解决了，多谢各位大侠帮助!按着3楼的办法做了一次，搞定!

qingzhou

其实这个问题以前有讨论过多次，精华区也是可以查找的。

《AS/400的一个故障》——居士
http://www.chinaunix.net/jh/10/17114.html