免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 3180 | 回复: 3

[存储网络] Brocade光纤交换机PORT初始化过程 [复制链接]

论坛徽章:
0
发表于 2003-03-19 13:21 |显示全部楼层
Fabric Initialization
A switch port begins initialization from a U_Port by first
sending up to twelve Loop Initialization Primitives (LIPs)
  If at least three LIPs are received at the port, it then becomes a
Fabric Loop (FL) port
  If no LIPs are returned, the switch port will shut down and then
attempt OLD_PORT initialization (Link Initialization Protocol
for Point-to-Point) by sending a Non-Operational Primitive
Sequence (NOS)
  If the Link Initialization Protocol-successful port will go into the
ACTIVE state as a Generic Port (G-Port) and transmit an
Exchange Link Parameter (ELP)
  If no ELP response is received, the port waits for a Fabric Login
(FLOGI) to initialize as a Fabric Port (F_Port)
  If not successful, the port will go back to LIP sequence three
times before shutting down and then re-checking every two
seconds
LIP

论坛徽章:
0
发表于 2003-03-19 16:54 |显示全部楼层

Brocade光纤交换机PORT初始化过程

最近发财了?!
尽都是Brocade的东东!

论坛徽章:
0
发表于 2003-03-19 17:30 |显示全部楼层

Brocade光纤交换机PORT初始化过程

没有发财哟。在看BROCADE的东西,看到觉得是点好东西就给大家share一下哟

论坛徽章:
0
发表于 2003-03-19 19:44 |显示全部楼层

Brocade光纤交换机PORT初始化过程

i think we all should like dansz.

many thanks


mrcenter
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP