aix5.3连接昆腾Scalar50 不能认到driver

greenline1982

aix5.3连接昆腾Scalar50 不能认到driver，请问是否是驱动问题？

Chinese_Dragon

AIX OS should can recognize the Tape Drives .

Chinese_Dragon

I mean if the Tape Library is fine . and the AIX connects to the Tape Library fine as well.

try #cfgmgr   and see what is happening .

无牙

先cfgmgr
后lsdev

至少也能看见个设备，如果没有就是硬件连接问题了。

greenline1982

回复 4# 无牙


    cfgmgr有报错：
Method error (/usr/lib/methods/cfgefscsi -l fscsi1 ):
        0514-061 Cannot find a child device.
Method error (/usr/lib/methods/cfgefscsi -l fscsi5 ):
        0514-061 Cannot find a child device.
Method error (/usr/lib/methods/cfgefscsi -l fscsi3 ):
        0514-061 Cannot find a child device.
cfgmgr: 0514-621 WARNING: The following device packages are required for
        device support but are not currently installed.
devices.fcp.changer
但是在aix上可以看到driver设备
lsdev
lsdev |grep Tape
rmt0        Available 01-08-00 SAS 4mm Tape Drive
rmt1        Available 03-00-01 Other FC SCSI Tape Drive

nbu不能看到driver
scan
************************************************************
*********************** SDT_TAPE    ************************
*********************** SDT_CHANGER ************************
*********************** SDT_OPTICAL ************************
************************************************************
------------------------------------------------------------
Device Name  : "/dev/ovpass0"
Passthru Name: "/dev/ovpass0"
Volume Header: ""
Port: -1; Bus: -1; Target: -1; LUN: -1
Inquiry    : "QUANTUM PX500           0033"
Vendor ID  : "QUANTUM "
Product ID : "PX500           "
Product Rev: "0033"
Serial Number: "QP0850BDC00513"
WWN          : ""
WWN Id Type  : 0
Device Identifier: "QUANTUM PX500           QP0850BDC00513"
Device Type    : SDT_CHANGER
NetBackup Robot Type: 8
Removable      : Yes
Device Supports: SCSI-3
Number of Drives : 2
Number of Slots  : 38
Number of Media Access Ports: 0
Drive 1 Serial Number      : "JN0740AME50897"
Drive 2 Serial Number      : "JN0740AME50882"
Flags : 0x0
Reason: 0x0
------------------------------------------------------------
Device Name  : "/dev/rmt0.1"
Passthru Name: "/dev/rmt0.1"
Volume Header: ""
Port: -1; Bus: -1; Target: -1; LUN: -1
Inquiry    : "IBM     DDS Gen6        WS17"
Vendor ID  : "IBM     "
Product ID : "DDS Gen6        "
Product Rev: "WS17"
Serial Number: "20080427"
WWN          : ""
WWN Id Type  : 0
Device Identifier: ""
Device Type    : SDT_TAPE
NetBackup Drive Type: Not Found(5)
Removable      : Yes
Device Supports: SCSI-3
Flags : 0x0
Reason: 0x0

无牙

tpautoconf -t
tpautoconf -r

的输出是什么？

你有没有创建ovpass?

greenline1982

回复 6# 无牙


    tpautoconf -t
TPAC60 IBM     DDS Gen6        WS17 20080339 -1 -1 -1 -1 /dev/rmt0.1 - -
本机磁带机
tpautoconf -r
TPAC60 QUANTUM PX500           0033 QP0850BDC00513 -1 -1 -1 -1 /dev/ovpass0 - -
已创建ovpass

100心

device support but are not currently installed.
devices.fcp.changer

wolfheader

atape？

fangbo

这个问题原因就是驱动器没有正确识别，版本过低，解决办法：

1、打补丁 不能安装atape ，因为该带库驱动器是hp的