- 论坛徽章:
- 0
|
ISL> hpux -lm
就是进维护模式的命令
lbseraph 发表于 2011-07-28 18:40 ![]()
维护模式也进不去
Main Menu: Enter command or menu > [A
ERROR: Unknown command
Main Menu: Enter command or menu > BO
Interact with IPL (Y, N, or Cancel)?> Y
Booting...
Boot IO Dependent Code (IODC) revision 1
HARD Booted.
ISL Revision A.00.43 Apr 12, 2000
ISL> hpux -lm
Boot
: disk(0/0/1/1.15.0.0.0.0.0;0)/stand/vmunix
10190848 + 1761280 + 3777416 start 0x1fc0e8
alloc_pdc_pages: Relocating PDC from 0xf0f0000000 to 0x7fa00000.
************* SYSTEM ALERT **************
SYSTEM NAME: uninitialized
DATE: 07/29/2011 TIME: 01:39:22
ALERT LEVEL: 12 = Software failure
REASON FOR ALERT
SOURCE: 1 = processor
SOURCE DETAIL: 1 = processor general SOURCE ID: 0
PROBLEM DETAIL: 0 = no problem detail
LEDs: RUN ATTENTION FAULT REMOTE POWER
FLASH FLASH FLASH ON ON
LED State: Unexpected Reboot. Running non-OS code. Non-critical error detected.
Check Chassis and Console Logs for error messages.
0xF8E000C01100B800 00000000 0000B800 - type 31 = legacy PA HEX chassis-code
0x58E008C01100B800 00006F06 1D012716 - type 11 = Timestamp 07/29/2011 01:39:22
A: ack read of this entry - X: Disable all future alert messages
Anything else skip redisplay the log entry
->Choice:Timeout!
*****************************************
************* SYSTEM ALERT **************
SYSTEM NAME: uninitialized
DATE: 07/29/2011 TIME: 01:39:22
ALERT LEVEL: 12 = Software failure
REASON FOR ALERT
SOURCE: 1 = processor
SOURCE DETAIL: 1 = processor general SOURCE ID: 0
PROBLEM DETAIL: 0 = no problem detail
LEDs: RUN ATTENTION FAULT REMOTE POWER
FLASH FLASH FLASH ON ON
LED State: Unexpected Reboot. Running non-OS code. Non-critical error detected.
Check Chassis and Console Logs for error messages.
0xA0E000C01100B000 00000000 000005E9 - type 20 = major change in system state
0x58E008C01100B000 00006F06 1D012716 - type 11 = Timestamp 07/29/2011 01:39:22
A: ack read of this entry - X: Disable all future alert messages
Anything else skip redisplay the log entry
->Choice:Timeout!
*****************************************
************* SYSTEM ALERT **************
SYSTEM NAME: uninitialized
DATE: 07/29/2011 TIME: 01:39:31
ALERT LEVEL: 3 = System blocked waiting for operator input
REASON FOR ALERT
SOURCE: 1 = processor
SOURCE DETAIL: 1 = processor general SOURCE ID: 0
PROBLEM DETAIL: 0 = no problem detail
LEDs: RUN ATTENTION FAULT REMOTE POWER
FLASH FLASH FLASH ON ON
LED State: Unexpected Reboot. Running non-OS code. Non-critical error detected.
Check Chassis and Console Logs for error messages.
0xF8E000301100E000 00000000 0000E000 - type 31 = legacy PA HEX chassis-code
0x58E008301100E000 00006F06 1D01271F - type 11 = Timestamp 07/29/2011 01:39:31
A: ack read of this entry - X: Disable all future alert messages
Anything else skip redisplay the log entry
->Choice: |
|