免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 3492 | 回复: 1

装系统报错 M4000 寻求帮助 [复制链接]

论坛徽章:
0
发表于 2011-07-29 09:25 |显示全部楼层
换过光盘
XSCF> sendbreak -d 0
Send break signal to DomainID 0?[y|n] :y
XSCF> console -d 0
Connect to DomainID 0?[y|n] :y

{1} ok boot cdrom
Resetting...
.POST Sequence 01 CPU Check
POST Sequence 02 Banner
LSB#00 (XSB#00-0): POST 2.13.0 (2010/02/17 10:34)
POST Sequence 03 Fatal Check
POST Sequence 04 CPU Register
POST Sequence 05 STICK
POST Sequence 06 MMU
POST Sequence 07 Memory Initialize
POST Sequence 08 Memory
POST Sequence 09 Raw UE In Cache
POST Sequence 0A Floating Point Unit
POST Sequence 0B SC
POST Sequence 0C Cacheable Instruction
POST Sequence 0D Softint
POST Sequence 0E CPU Cross Call
POST Sequence 0F CMU-CH
POST Sequence 10 PCI-CH
POST Sequence 11 Master Device
POST Sequence 12 DSCP
POST Sequence 13 SC Check Before STICK Diag
POST Sequence 14 STICK Stop
POST Sequence 15 STICK Start
POST Sequence 16 Error CPU Check
POST Sequence 17 System Configuration
POST Sequence 18 System Status Check
POST Sequence 19 System Status Check After Sync
POST Sequence 1A OpenBoot Start...
POST Sequence Complete.

Sun SPARC Enterprise M4000 Server, using Domain console
Copyright 2010 Sun Microsystems, Inc.  All rights reserved.
Copyright 2010 Sun Microsystems, Inc. and Fujitsu Limited. All rights reserved.
OpenBoot 4.24.13, 32768 MB memory installed, Serial #94683458.
Ethernet address 0:21:28:a4:c1:42, Host ID: 85a4c142.



Rebooting with command: boot cdrom
Boot device: /pci@0,600000/pci@0/pci@8/pci@0/scsi@1/disk@3,0:f  File and args:
SunOS Release 5.10 Version Generic_137137-09 64-bit
Copyright 1983-2008 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Configuring devices.
NOTICE: nxge0: xcvr addr:0x0d - link is down
NOTICE: nxge1: xcvr addr:0x0c - link is down
NOTICE: nxge2: xcvr addr:0x0b - link is down
NOTICE: nxge0: xcvr addr:0x0d - link is down
NOTICE: nxge3: xcvr addr:0x0a - link is down
NOTICE: nxge1: xcvr addr:0x0c - link is down
Using RPC Bootparams for network configuration information.
Attempting to configure interface nxge3...
NOTICE: nxge2: xcvr addr:0x0b - link is down
Skipped interface nxge3
Attempting to configure interface nxge2...
Skipped interface nxge2
Attempting to configure interface nxge1...
Skipped interface nxge1
Attempting to configure interface nxge0...
Skipped interface nxge0
Attempting to configure interface bge1...
Skipped interface bge1
Attempting to configure interface bge0...
Skipped interface bge0
Reading ZFS config: done.
Setting up Java. Please wait...
Segmentation Fault
Segmentation Fault - core dumped
Serial console, reverting to text install
WARNING: init(1M) exited on fatal signal 11: restarting automatically
WARNING: init(1M) exited on fatal signal 11: restarting automatically
WARNING: init(1M) exited on fatal signal 11: restarting automatically
WARNING: init(1M) exited on fatal signal 11: restarting automatically
WARNING: init(1M) exited on fatal signal 11: restarting automatically
WARNING: init(1M) exited on fatal signal 11: restarting automatically
WARNING: init(1M) exited on fatal signal 11: restarting automatically
WARNING: init(1M) exited on fatal signal 11: restarting automatically
WARNING: init(1M) exited on fatal signal 11: restarting automatically
WARNING: init(1M) exited on fatal signal 11: restarting automatically
WARNING: init(1M) exited on fatal signal 11: restarting automatically
WARNING: init(1M) exited on fatal signal 11: restarting automatically
WARNING: init(1M) exited on fatal signal 11: restarting automatically
WARNING: init(1M) exited on fatal signal 11: restarting automatically
WARNING: init(1M) exited on fatal signal 11: restarting automatically
WARNING: init(1M) exited on fatal signal 11: restarting automatically
WARNING: init(1M) exited on fatal signal 11: restarting automatically
WARNING: init(1M) exited on fatal signal 11: restarting automatically
WARNING: init(1M) exited on fatal signal 11: restarting automatically
WARNING: init(1M) exited on fatal signal 11: restarting automatically
WARNING: init(1M) exited on fatal signal 11: restarting automatically

INIT: Restarting.

                 INIT: Persistent state file `/etc/svc/volatile/init.state' is i
nvalid and was ignored.
                       Jul 28 07:14:17 svc.startd[208]: restarting after interru
ption
Requesting maintenance mode
(See /lib/svc/share/README for additional information.)
Jul 28 07:14:17 svc.startd[214]: restarting after interruption
Requesting maintenance mode
(See /lib/svc/share/README for additional information.)
#

论坛徽章:
0
发表于 2011-07-29 10:21 |显示全部楼层
光盘有毛病
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP