求助SUN V880的报错的解决方法

霹将912

SUN V880在进行串口检测能正常去到OK正常状态下，probe-scsi能认到硬盘，然后进行boot cdrom -s去到输入FORMAT就认不到硬盘了
提示# SUNW,pci-gem0: Could not Establish Link -- Check if the cable is plugged in

整个过程如下：
{2} ok probe-scsi
LiD HA LUN  --- Port WWN ---  ----- Disk description -----
0   0   0  500000e010b75511  FUJITSU MAP3735F SUN72G 1501
6   6   0  5080020000180411  SUNW    SUNWGS INT FCBPL922A
{2} ok boot cdrom -s
Boot device: /pci@8,700000/scsi@1/disk@6,0:f  File and args: -s
SunOS Release 5.10 Version Generic_137137-09 64-bit
Copyright 1983-2008 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
WARNING: pcisch1: ino 0x4 blocked鼴ooting to milestone "milestone/single-user:default".
WARNING: pcisch1:pci@8,600000: ib_intr_dist(29ebf9bf020,204) timeout
Configuring devices.
Using RPC Bootparams for network configuration information.
Attempting to configure interface eri0...
Skipped interface eri0
Attempting to configure interface ge0...
SUNW,pci-gem0: Could not Establish Link -- Check if the cable is plugged in.
Skipped interface ge0
Requesting System Maintenance Mode
SINGLE USER MODE
# format
Searching for disks...done
No disks found!

# SUNW,pci-gem0: Could not Establish Link -- Check if the cable is plugged in.

taojie2000

回复 1# 霹将912


    WARNING: pcisch1:pci@8,600000: ib_intr_dist(29ebf9bf020,204) timeout     这是重点   搜搜

wenyy_unix

硬盘的指示灯正常吗？

goldfishway

硬盘指示灯正常

unix5188

硬盘背板到主板的上的线可能有问题了，最近还是拆过机器的话，那就有可能是松动了。实在不行报case让oracle的工程师去现场测试把，

easybegin

用最简配置，拔掉所有pci卡。

easybegin

用最简配置，拔掉所有pci卡。

goldfishway

一共是5台V880 的机器

其中2台是由扩展硬盘柜子的 就是可以上12个硬盘的

客户需要 2台

把12个硬盘笼子跟6个硬盘笼子对调 原来12个硬盘位的机器就报上面的错误,用排除法,把主办 io班 cpu班个呢更换到好的机器测试,最后发现是硬盘笼子安装的问题.明确点,可能是笼子未装好线,或者笼子坏了.