各位，帮忙解决一个samba的问题，谢谢！

shineregion

下面是一段/var/log/samba/smbd.log

[2011/10/31 11:50:35, 0] param/loadparm.c:lp_do_parameter(3559)
  Global parameter load printers found in service section!
[2011/10/31 11:50:35, 0] param/loadparm.c:lp_do_parameter(3559)
  Global parameter printcap name found in service section!
[2011/10/31 11:50:35, 0] param/loadparm.c:lp_do_parameter(3559)
  Global parameter disable spoolss found in service section!
[2011/10/31 11:50:35, 0] param/loadparm.c:lp_do_parameter(3559)
  Global parameter load printers found in service section!
[2011/10/31 11:50:35, 0] param/loadparm.c:lp_do_parameter(3559)
  Global parameter printcap name found in service section!
[2011/10/31 11:50:35, 0] param/loadparm.c:lp_do_parameter(3559)
  Global parameter disable spoolss found in service section!

各位帮忙看看这个报错是啥意思，怎么样修改呢。谢谢！

thatday

在smb.conf中加入以下设定试试:

load printers = no
printing = bsd
printcap name = /dev/null
disable spoolss = yes

thatday

回复 1# shineregion


    在smb.conf中加入以下设定试试:

load printers = no
printing = bsd
printcap name = /dev/null
disable spoolss = yes

thatday

在smb.conf中加入以下设定试试:

load printers = no
printing = bsd
printcap name = /dev/null
disable spoolss = yes

thatday

回复 1# shineregion


在smb.conf中加入以下设定试试:

load printers = no
printing = bsd
printcap name = /dev/null
disable spoolss = yes

thatday

怎么一发发这么多，晕！

shineregion

根据那天老大的回复，做了相应修改之后，出现了以下的日志内容：

[2011/11/01 04:02:02, 0] param/loadparm.c:lp_do_parameter(3559)
  Global parameter disable spoolss found in service section!
[2011/11/01 04:02:02, 0] param/loadparm.c:lp_do_parameter(3559)
  Global parameter load printers found in service section!
[2011/11/01 04:02:02, 0] param/loadparm.c:lp_do_parameter(3559)
  Global parameter printcap name found in service section!
[2011/11/01 04:02:02, 0] param/loadparm.c:lp_do_parameter(3559)
  Global parameter disable spoolss found in service section!

啥意思呢？百度google都搜了。没什么答案！
表面意思后面似乎还看的懂，前面param/loadparm.c:lp_do_parameter 搞不懂是啥意思！帮忙解释下，谢谢！

thatday

根据那天老大的回复，做了相应修改之后，出现了以下的日志内容：

[2011/11/01 04:02:02, 0] param/loadp ...
shineregion 发表于 2011-11-01 08:59

你看不懂的那个，是源码中检查配置文件的方法。
你再仔细检查看看你的samba配置文件。