免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 1668 | 回复: 6
打印 上一主题 下一主题

A1000 做raid时出错,各位帮我解决一下吧! [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2004-07-07 09:43 |只看该作者 |倒序浏览
我有一台A1000连在Blade2000上,A1000上是4块盘,Blade2000是solaris9,推荐补丁也打了,还打了 112233-12,113033-04,113277-22这几个补丁,但是在做raid 5 时,机器重启了,然后就报出这个错误,不知道时怎么回事,麻烦大家帮我解决一下,谢谢!!Sun Blade 2000/1000 (UltraSPARC-III+) , No Keyboard
Copyright 1998-2004 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.13.0, 4096 MB memory installed, Serial #57191419.
Ethernet address 0:3:ba:68:ab:fb, Host ID: 8368abfb.



Rebooting with command: boot -r                                       
Boot device: /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@1,0  File and args: -r
SunOS Release 5.9 Version Generic_112233-12 64-bit
Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
configuring IPv4 interfaces: eri0.
Hostname: Blade2000
Configuring /dev and /devices
Configuring the /dev directory (compatibility devices)
Re-generating rdriver.conf file ...
Configuring the RAID devices
The system is coming up.  Please wait.
checking ufs filesystems
/dev/rdsk/c1t1d0s6: is clean.
/dev/rdsk/c1t1d0s5: is clean.
/dev/rdsk/c1t1d0s7: is clean.
starting rpc services: rpcbind done.
Setting netmask of eri0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway Blade2000
syslog service starting.
The NVSRAM settings of controller c4t5d0(1T94516042) are correct.

nvutil command succeeded.


fwutil succeeded!
Array Monitor initiated
RDAC daemons initiated
Jul  7 09:32:43 Blade2000 rdriver: ID[RAIDarray.rdaemon.1001] RDAC Resolution Daemon locked in memory
Jul  7 09:32:43 Blade2000 raid: AEN event Host=Blade2000 Ctrl=1T94516042 Dev=c4t5d0
Jul  7 09:32:43 Blade2000 raid:   ASC=A0 ASCQ=00 FRU=00 LUN=00 LUN Stat=00
Jul  7 09:32:43 Blade2000 raid:   Sense=700006000000009800000000A0000000000000000000000000000000000000000000800000082C000000000000000000000000000B05315439343531363034322020202020200301040000000000000000000000000000000000000000000000000000000005000000000000000000000000000000000000000000000000000000000000000000000000009B3037303730342F30323335303200000000000000
Jul  7 09:32:43 Blade2000 sendmail[1283]: My unqualified host name (Blade2000) unknown; sleeping for retry
volume management starting.
The system is ready.

Blade2000 console login:

论坛徽章:
0
2 [报告]
发表于 2004-07-07 10:08 |只看该作者

A1000 做raid时出错,各位帮我解决一下吧!

这个是正常的, 没有错误!

报错的是sendmail, 好像raid daemon 启动后会发个mail 给root。你的sendmail 配置有问题而已,但raid 工作正常.

论坛徽章:
0
3 [报告]
发表于 2004-07-07 10:40 |只看该作者

A1000 做raid时出错,各位帮我解决一下吧!

sendmail 该怎么设置呢?还有,原来4x36G的硬盘,做完raid 5后,硬盘容量应该是多大呢?

论坛徽章:
7
荣誉会员
日期:2011-11-23 16:44:17水瓶座
日期:2013-08-28 21:20:16丑牛
日期:2013-10-02 21:01:462015年迎新春徽章
日期:2015-03-04 09:54:45操作系统版块每日发帖之星
日期:2016-06-05 06:20:0015-16赛季CBA联赛之吉林
日期:2016-06-20 08:24:0515-16赛季CBA联赛之四川
日期:2016-08-18 15:02:02
4 [报告]
发表于 2004-07-07 10:44 |只看该作者

A1000 做raid时出错,各位帮我解决一下吧!

那就是36X(4-1)=108GB喽。

论坛徽章:
0
5 [报告]
发表于 2004-07-07 10:47 |只看该作者

A1000 做raid时出错,各位帮我解决一下吧!

知道了,谢谢!!

论坛徽章:
0
6 [报告]
发表于 2004-07-07 10:50 |只看该作者

A1000 做raid时出错,各位帮我解决一下吧!

4x36G的硬盘, 硬盘容量:  36G x3= 108G

但做完分区格式化,实际你可使用的空间大慨有100G 左右。

Sendmai 的配置同你的机器的DNS配置有关。 如果不使用email server 那部分,我建议你不用理它。。。 小小错误没有关系的哪!

论坛徽章:
0
7 [报告]
发表于 2004-07-07 11:18 |只看该作者

A1000 做raid时出错,各位帮我解决一下吧!

在/etc/hosts里加一个  xyz.net
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP