cisco交换机如何查看光模块的信息

xuxic

如何查看光模块信息，包括波长、距离、衰减等，搜了好久，没有找到啊，我们用的交换机是C4507
C4507#sh ver
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-ENTSERVICESK9-M), Version 12.2(40)SG, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 07-Nov-07 18:00 by prod_rel_team
Image text-base: 0x10000000, data-base: 0x11ADF0B8

ROM: 12.2(31r)SGA3
Pod Revision 16, Force Revision 31, Tie Revision 32

GDCZ-WLAN-QQT-SWITCH02-C4507 uptime is 24 weeks, 1 day, 16 hours, 40 minutes
Uptime for this control processor is 24 weeks, 1 day, 16 hours, 37 minutes
System returned to ROM by reload
System restarted at 18:07:15 BeiJing Wed Jul 13 2011
System image file is "bootflash:cat4500-entservicesk9-mz.122-40.SG.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C4507R-E (MPC8540) processor (revision 13) with 524288K bytes of memory.
Processor board ID FOX1508H1BT
MPC8540 CPU at 800Mhz, Supervisor V-10GE
Last reset from Reload
12 Virtual Ethernet interfaces
70 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.

Configuration register is 0x102

aplah

这个好像以前有帖子问过

show inv

aplah

show idprom intrface xx 这个也行

xuxic

谢谢了。

C4507#show idprom int g2/6

GBIC Serial EEPROM Contents:
Common Block:
Identifier        = GBIC [0x1]
Extended Id       = GBIC is compliant with MOD_DEF 6 [0x6]
Connector         = SC connector [0x1]
Transceiver
  Type             = Gbic 1000BaseLH
  Speed(FC,byte 10)= Not available [0x0]
  Media            = Not available [0x0]
  Technology       = Not available [0x0]
  Link Length      = Not available [0x0]
  GE Comp Codes    = 1000BASE-LX  [0x2] (LX used generically for LX, LH or ZX)
  SONET Comp Codes = Not available [0x0]
Encoding          = 8B10B  [0x1]
BR, Nominal       = 1300 Mbps (million bits per second)
Length(9u) in km  = GBIC does not support single mode fibre, or the length
                     must be determined from the transceiver technology.
Length(9u)        = 10000 m
Length(50u)       = 550 m
Length(62.5u)     = 550 m
Length(Copper)    = GBIC does not support copper cables, or the length must
                     be determined from the transceiver technology.
Vendor name       = CISCO-AVAGO
Vendor OUI        = 5994
Vendor Part No.   = SFCT-5687Z-CS1
Vendor Part Rev.  = 0000
Wavelength        = Not available
CC_BASE           = 0x9C

Extended ID Fields
Options           = Loss of Signal implemented TX_FAULT signal implemented TX_DISABLE is implemented and disables the serial output  [0x1A]
BR, max           = Unspecified
BR, min           = Unspecified
Vendor Serial No. = AGD1441F0AR
Date code         = 101020
Diag monitoring   = Not implemented
Rx pwr measuremnt = Optical Modulation Amplitude (OMA)
Address change    = Not required
CC_EXT            = 0xBD

Vendor Specific ID Fields:
18AB0674  20 00 06 BD 17 0A 1D B1 5E 05 4B 4B 59 09 28 D5    ..=....^.KKY.(U
18AB0684  9D BA 2B 00 00 00 00 00 00 00 00 00 24 86 8A BB   ^].+.........$.
;
         
SEEPROM contents (hex) size 128:
0x0000  01 06 01 00 00 00 02 00 00 00 00 01 0D 00 00 64   ...............d
0x0010  37 37 00 00 43 49 53 43 4F 2D 41 56 41 47 4F 20   77..CISCO-AVAGO
0x0020  20 20 20 20 00 00 17 6A 53 46 43 54 2D 35 36 38       ...jSFCT-568
0x0030  37 5A 2D 43 53 31 20 20 30 30 30 30 00 00 00 9C   7Z-CS1  0000...^\
0x0040  00 1A 00 00 41 47 44 31 34 34 31 46 30 41 52 20   ....AGD1441F0AR
0x0050  20 20 20 20 31 30 31 30 32 30 20 20 00 00 00 BD       101020  ...=
0x0060  20 00 06 BD 17 0A 1D B1 5E 05 4B 4B 59 09 28 D5    ..=...1^.KKY.(U
0x0070  9D BA 2B 00 00 00 00 00 00 00 00 00 24 86 8A BB   ^]:+.........$^F
;

xuxic

show inv查不到

GDCZ-WLAN-QQT-SWITCH02-C4507#show inventory GigabitEthernet2/6
NAME: "GigabitEthernet2/6", DESCR: "1000BaseLH"
PID: SFCT-5687Z-CS1    , VID: 00 , SN: AGD1441F0AR

aplah

回复 5# xuxic

噢，这是查模块SN比较好用
   

tangye

回复 4# xuxic


    这个输出, 有模块型号, 查手册就有了

9527不是我

回复 1# xuxic


你都查到了厂家和型号，再去avago网站找找datasheet就知道了。
Vendor name       = AVAGO
Vendor Part No.   = SFCT-5687Z-CS1

xuxic

多谢大家的指点

sdasdf

学习了