EVA8000磁盘损坏，但不在upgroup中

ignite

EVA8000磁盘损坏，但不在upgroup中，重启SMA也没有用，cmv中是failed的状态，ungroup中没有出现该盘，能直接拔出更换吗？

lbseraph

看对应的disk group是否还有该盘，没有的话就可以拔掉更换~如果那个disk group还在做reconstruction的话，需要等它做完之后才能更换~

ignite

disk group中坏盘还在，只是状态为failed，打个红X，好几天了，重构应该做完了，记得以前重启一下cmdview就可以在ungroup中看到，这回居然不行，郁闷。

chinadns

Check the controller log and SSSU to find out why the migration is blocked. Make sure there is enough free space available to perform the migration. If there is, see if the failing drive is logging the following error:

3/11/00 FRU=81 Physical disk drive: 2000001d387a67340000000000000000; Port ID: DP-1B; Enclosure: 8.; Bay: 2.; AL_PA: 0x00bc; Sense Key: 3 (MEDIUM ERROR); ASC: 0x11 ASCQ: 0x00 (Unrecovered read error); FRU Code: 0x81

If the drive you are trying to ungroup is logging the unrecovered read errors, that is what is blocking the migration. The data cannot be migrated off of this drive since the data cannot be read. To recover from this, you must pull this drive. Pulling the drive will cause a reconstruct to start. The reconstruct will recreate the data from parity.

Due diligence must be preformed before you pull a drive from a disk group. You must make sure that there are no Raid 0 vdisks, and that no reconstruct, migration or reverting is in progress on the disk group containing the failing drive. If there is any question about this please engage EVA support before pulling the drive.

ignite

没有去看控制器的日志，会不会因为这个disk group只有8块盘，EVA要求最小配置的原因而导致无法ungroup？

chinadns

8块盘的DG可以坏到6块

lbseraph

不是所有情况都可以看到坏盘被踢出来放在Ungrouped disks的文件夹里的，要确认的话用SSSU查一下该盘还有没有数据在上面，如果是0%的话那么可以直接拔掉该盘正常换就行~

ignite

谢谢各位的解答。