- 论坛徽章:
- 2
|
如题,网络安装完之后报错,步骤没有错。初步怀疑光盘映像文件有问题,给点意见
Solaris 10 software installation partially failed
Solaris 10 packages partially installed
SUNWj5dev
SUNWccccr
SUNWgnome-panel-share
SUNWzfsu
SUNWgimpprint
SUNWpostgr-83-client
SUNWgnome-audio-root
SUNWxorg-client-docs
SUNWgnome-media-root
SUNWtsr
SUNWflexruntime
SUNWTiff-devel
SUNWperl584man
SUNWgnome-media-player
SUNWqlc
SUNWpsm-lpd
SUNWhos
SUNWfmd
SUNWautoef
SUNWgnome-perf-meter-share
SUNWgnome-common-devel-share
SUNWcasu
SUNWxwcsl
SUNWipplu
SUNWhxplt
SUNWhdicn
SUNWkfbcf
SUNWgnome-print-devel-share
SUNWgnome-media-devel-share
SUNWfirefoxl10n-zh-TW
Customizing system files
- Mount points table (/etc/vfstab)
- Unselected disk mount points (/var/sadm/system/data/vfstab.unselected)
- Network host addresses (/etc/hosts)
- Environment variables (/etc/default/init)
Cleaning devices
Customizing system devices
- Physical devices (/devices)
- Logical devices (/dev)
Installing boot information
- Installing boot blocks (c0t1d0s0)
- Installing boot blocks (/dev/rdsk/c0t1d0s0)
- Updating system firmware for automatic rebooting
Installation log location
- /a/var/sadm/system/logs/install_log (before reboot)
- /var/sadm/system/logs/install_log (after reboot)
Installation complete
Executing SolStart postinstall phase...
Executing finish script "patch_finish"...
Finish script patch_finish execution completed.
Executing JumpStart postinstall phase...
The begin script log 'begin.log'
is located in /var/sadm/system/logs after reboot.
The finish script log 'finish.log'
is located in /var/sadm/system/logs after reboot.
Launching installer. Please Wait...
Installing Additional Software
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Pausing for 30 seconds at the "Summary" screen. The wizard will continue to
the next step unless you select "Pause". Enter 'p' to pause. Enter 'c' to
continue. [c]
Pausing for 90 seconds at the "Reboot" screen. The wizard will continue to
the next step unless you select "Pause". Enter 'p' to pause. Enter 'c' to
continue. [c] c
Creating boot_archive for /a
updating /a/platform/sun4u/boot_archive
syncing file systems... done
rebooting...
LOM event: +4h20m45s host reset
NOTICE: RSC-Initiated Reset
Probing system devices
ERROR: /pci@8,600000/<Unnamed>: Last Trap: Data Access Error
screen not found.
keyboard not found.
Keyboard not present. Using lom-console for input and output.
Probing system devices
ERROR: /pci@8,600000/<Unnamed>: Last Trap: Data Access Error
Sun Netra T4 (UltraSPARC-III+) , No Keyboard
Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.16.4, 2048 MB memory installed, Serial #1010905.
Ethernet address 0:3:ba:f:6c:d9, Host ID: 800f6cd9.
Rebooting with command: boot
Boot device: /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@w500000e0111163d1,0:a File and args:
SunOS Release 5.10 Version Generic_142909-17 64-bit
Copyright (c) 1983, 2010, Oracle and/or its affiliates. All rights reserved.
SUNW,qlc: no major number
Cannot load drivers for /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@w500000e0111163d1,0:a
Can't load the root filesystem
Type 'go' to resume
ok go
Cannot assemble drivers for root /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@w500000e0111163d1,0:a
Cannot mount root on /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@w500000e0111163d1,0:a fstype ufs
panic[cpu0]/thread=180e000: vfs_mountroot: cannot mount root
000000000180b950 genunix:vfs_mountroot+370 (1873c00, 189cc00, 0, 1284800, 1877800, 6)
%l0-3: 0000030000072248 000000000186b3f8 000000000112fc00 00000000018cfc00
%l4-7: 0000000000000600 0000000000000200 0000000000000800 0000000000000200
000000000180ba10 genunix:main+ec (18155d0, 0, 18387c0, 10a1800, 0, 1)
%l0-3: 000000000180c000 000000000180c000 0000000070002000 0000000000000000
%l4-7: 000000000183d800 0000000000000000 000000000180c000 0000000000000001
skipping system dump - no dump device configured
rebooting... |
|