单用户format： No disks found!

zhouwei4479

880 6块72G硬盘，只用了一块，今天客户要求做个镜像，系统是9
先prtvtoc......
然后metadb -afc 3 c1t0d0s7 c1t1d0s7
结果宕机，到OK下了
{3} ok show-disks
a) /pci@8,600000/SUNW,qlc@2/fp@0,0/disk
b) /pci@8,700000/scsi@1/disk
q) NO SELECTION
Enter Selection, q to quit: q
{3} ok devalias
screen                   /pci@8,700000/SUNW,XVR-100@5
disk                     /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@0,0
disk0                    /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@0,0
disk1                    /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@1,0
disk2                    /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@2,0
disk3                    /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@3,0
disk4                    /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@4,0
disk5                    /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@5,0
disk6                    /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@8,0
disk7                    /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@9,0
disk8                    /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@a,0
disk9                    /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@b,0
disk10                   /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@c,0
disk11                   /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@d,0
scsi                     /pci@8,600000/SUNW,qlc@2
cdrom                    /pci@8,700000/scsi@1/disk@6,0:f
tape                     /pci@8,700000/scsi@1/tape@4,0
scsix                    /pci@8,700000/scsi@1
net                      /pci@9,700000/network@1,1
gem                      /pci@8,600000/network@1
flash                    /pci@9,700000/ebus@1/flashprom@0,0
idprom                   /pci@9,700000/ebus@1/i2c@1,500030/idprom@0,a0
 More [<space>,<cr>,q,n,p,c] ? 
                              
nvram                    /pci@9,700000/ebus@1/i2c@1,500030/nvram@0,a0
i2c3                     /pci@9,700000/ebus@1/i2c@1,500030
i2c2                     /pci@9,700000/ebus@1/i2c@1,50002e
bbc1                     /pci@9,700000/ebus@1/bbc@1,500000
i2c1                     /pci@9,700000/ebus@1/i2c@1,30
i2c0                     /pci@9,700000/ebus@1/i2c@1,2e
bbc0                     /pci@9,700000/ebus@1/bbc@1,0
rsc-console              /pci@9,700000/ebus@1/rsc-console@1,3083f8
rsc-control              /pci@9,700000/ebus@1/rsc-control@1,3062f8
ttyb                     /pci@9,700000/ebus@1/serial@1,400000:b
ttya                     /pci@9,700000/ebus@1/serial@1,400000:a
pci9b                    /pci@9,700000
pci9a                    /pci@9,600000
pci8b                    /pci@8,700000
pci8a                    /pci@8,600000
ebus                     /pci@9,700000/ebus@1
name                     aliases
{3} ok probe-scsi-all
/pci@8,600000/SUNW,qlc@2
LiD HA LUN  --- Port WWN ---  ----- Disk description -----
1   1   0  21000000871a3623  HITACHI DK32EJ72FSUN72G 2Q0F
2   2   0  500000e010951af1  FUJITSU MAP3735F SUN72G 1501
6   6   0  50800200001e1ff9  SUNW    SUNWGS INT FCBPL922A
3   3   0  2100000c50f75f09  SEAGATE ST373307FSUN72G 0307
4   4   0  500000e01097e481  FUJITSU MAP3735F SUN72G 1501
5   5   0  500000e010953fa1  FUJITSU MAP3735F SUN72G 1501
0   0   0  500000e010952ff1  FUJITSU MAP3735F SUN72G 1501

/pci@8,700000/scsi@1
Target 5
  Unit 0   Removable Tape     HP      C5683A          C005
Target 6
  Unit 0   Removable Read Only device    TOSHIBA DVD-ROM SD-M17111005
{3} ok boot disk0
Boot device: /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@0,0  File and args:
Boot load failed.
The file just loaded does not appear to be executable.
系统起不来，从光盘启动单用户

{3} ok boot cdrom -s
Boot device: /pci@8,700000/scsi@1/disk@6,0:f  File and args: -s
||/-\|/-\|/-\|/-\|
SunOS Release 5.10 Version Generic_141444-09 64-bit
Copyright 1983-2009 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-WARNING: pcisch1: ino 0x4 blocked

zhouwei4479

单用户下
# fsck -y /dev/rdsk/c1t0d0s0
fsck: could not stat /dev/rdsk/c1t0d0s0: No such file or directory
# format
Searching for disks...done
No disks found!

# mount /dev/dsk/c1t0d0s0 /a
mount: /dev/dsk/c1t0d0s0 or /a, no such file or directory

找不到硬盘，烦啊
没办法了，开始最大化自检
<*>
Hardware Power On

@(#)OBP 4.13.0 2004/01/19 18:26 Sun Fire 880
Front Panel Keyswitch is in Diagnostic position.
Online: CPU0 CPU1 CPU2 CPU3*
Validating JTAG integrity...Done
Disabling DAR error circuitry...Done
Clearing DCS error circuitry state...Done
Initializing DTL circuitry state...Done
Initializing MDR via JTAG...Done
Enabling DAR error circuitry...Done

Probing Motherboard....part# 501-6771-01 serial# 004765
  Safari min 100MHz, cumulative 100MHz;  max 150MHz, cumulative 150MHz
  'STICK' clock 10MHz; BootBus timing 014f.99fd.a7e6.3f29
Probing I/O Board......part# 501-5142-20 serial# 056000
Probing System RSC.....part# 501-5856-06 serial# 255527
Probing PwrDistBoard...part# 375-0071-03 serial# N60876
Probing PowerSupply0...part# 300-1353-03 serial# M79345
Probing PowerSupply1...part# 300-1353-03 serial# M79346
Probing PowerSupply2...part# 300-1353-03 serial# M79340
Probing GPTwo Slot A...part# 501-6164-02 serial# 059720
  Safari min 100MHz, cumulative 100MHz;  max 150MHz, cumulative 150MHz
  CPU rated speed 1200MHz; ECache 8MB 3.3ns
Probing GPTwo Slot B...part# 501-6164-02 serial# 059706
  Safari min 100MHz, cumulative 100MHz;  max 150MHz, cumulative 150MHz
  CPU rated speed 1200MHz; ECache 8MB 3.3ns
Probing GPTwo Slot C...No module detected
Probing GPTwo Slot D...No module detected

Desired Safari Bus speed 150MHz, selecting 150MHz
Configuring CPUs..........
... CPU0 Rated Speed 1200MHz, Safari 150MHz, want 8:1, got 8:1 ==> CPU 1200MHz
         Ecache 8MB 3.3ns mode=5-4-4 2-way ECCR: 0000.0000.0343.4c00
... CPU1 Rated Speed 1200MHz, Safari 150MHz, want 8:1, got 8:1 ==> CPU 1200MHz
         Ecache 8MB 3.3ns mode=5-4-4 2-way ECCR: 0000.0000.0343.4c00
... CPU2 Rated Speed 1200MHz, Safari 150MHz, want 8:1, got 8:1 ==> CPU 1200MHz
         Ecache 8MB 3.3ns mode=5-4-4 2-way ECCR: 0000.0000.0343.4c00
... CPU3 Rated Speed 1200MHz, Safari 150MHz, want 8:1, got 8:1 ==> CPU 1200MHz
         Ecache 8MB 3.3ns mode=5-4-4 2-way ECCR: 0000.0000.0343.4c00 Done
Setting system speed (and resetting)...
<*>
Set Speed Reset

@(#)OBP 4.13.0 2004/01/19 18:26 Sun Fire 880
Front Panel Keyswitch is in Diagnostic position.
Online:  CPU0 Ultra-III+ (v11.1) 8:1 1200MHz 8MB 4:1 ECache
Online:  CPU1 Ultra-III+ (v11.1) 8:1 1200MHz 8MB 4:1 ECache
Online:  CPU2 Ultra-III+ (v11.1) 8:1 1200MHz 8MB 4:1 ECache
Online: *CPU3 Ultra-III+ (v11.1) 8:1 1200MHz 8MB 4:1 ECache
Executing Power On SelfTest w/%o0 = 0000.0000.0001.2042
0:0>
0:0>@(#) Sun Fire[TM] V880 POST 4.13.0 2004/02/12 19:23
       /export/common-source/firmware_re/post/post-build-4.13.0/Camelot/daktari/integrated  (firmware_re)  
0:0>Copyright ?2004 Sun Microsystems, Inc. All rights reserved
  SUN PROPRIETARY/CONFIDENTIAL.
  Use is subject to license terms.
0:0>Jump from OBP->POST.
0:0>Keyswitch in DIAGNOSTIC POSITION.
0:0>Diag level set to MIN.
0:0>Verbosity level set to 0.
0:0>MFG scrpt mode set NORM
0:0>I/O port set to serial TTYA.
0:0>
0:0>Start selftest...
0:0>CPUs present in system: 0:0 1:0 2:0 3:0
0:0>Test CPU(s).....
0:0>Init CPU
0:0>        UltraSparc_III_plus Version 11.1
0:0>DMMU Registers Access
0:0>DMMU TLB DATA RAM Access
0:0>DMMU TLB TAGS Access
0:0>IMMU Registers Access
0:0>IMMU TLB DATA RAM Access
0:0>IMMU TLB TAGS Access
0:0>Probe Ecache
0:0>        Size = 00000000.00800000...
0:0>Ecache Data Bitwalk
0:0>Ecache Address Bitwalk
0:0>Scrub and Setup Ecache
0:0>Setup and Enable DMMU
0:0>Setup DMMU Miss Handler
0:0>Test and Init Temp Mailbox
1:0>Init CPU
2:0>Init CPU
3:0>Init CPU
1:0>        UltraSparc_III_plus Version 11.1
2:0>        UltraSparc_III_plus Version 11.1
3:0>        UltraSparc_III_plus Version 11.1
1:0>DMMU Registers Access
2:0>DMMU Registers Access
3:0>DMMU Registers Access
1:0>DMMU TLB DATA RAM Access
2:0>DMMU TLB DATA RAM Access
3:0>DMMU TLB DATA RAM Access
1:0>DMMU TLB TAGS Access
2:0>DMMU TLB TAGS Access
3:0>DMMU TLB TAGS Access
1:0>IMMU Registers Access
2:0>IMMU Registers Access
3:0>IMMU Registers Access
1:0>IMMU TLB DATA RAM Access
2:0>IMMU TLB DATA RAM Access
3:0>IMMU TLB DATA RAM Access
1:0>IMMU TLB TAGS Access
2:0>IMMU TLB TAGS Access
3:0>IMMU TLB TAGS Access
1:0>Probe Ecache
1:0>        Size = 00000000.00800000...
2:0>Probe Ecache
2:0>        Size = 00000000.00800000...
3:0>Probe Ecache
3:0>        Size = 00000000.00800000...
1:0>Ecache Data Bitwalk
2:0>Ecache Data Bitwalk
3:0>Ecache Data Bitwalk
1:0>Ecache Address Bitwalk
2:0>Ecache Address Bitwalk
3:0>Ecache Address Bitwalk
1:0>Scrub and Setup Ecache
2:0>Scrub and Setup Ecache
3:0>Scrub and Setup Ecache
1:0>Setup and Enable DMMU
3:0>Setup and Enable DMMU
1:0>Setup DMMU Miss Handler
2:0>Setup and Enable DMMU
3:0>Setup DMMU Miss Handler
1:0>Test and Init Temp Mailbox
2:0>Setup DMMU Miss Handler
3:0>Test and Init Temp Mailbox
2:0>Test and Init Temp Mailbox
0:0>Init Scan/I2C.....
0:0>Initializing Scan Database
0:0>Mask DAR errors off
0:0>Init MDR DTL
0:0>Init DAR DTL
0:0>Enable Partial DAR error
0:0>Init DCS DTL
0:0>Init I2C
0:0>Unquiesce Safari
0:0>Margin all voltages to nominal
0:0>Scan ring integrity
0:0>
0:0>INFO: H/W under test = CPU Board Slot C (Cheetah 4, DCDS [0-7], SRAMs) Scan Ring NOT Present or Shut OFF
0:0>
0:0>INFO: H/W under test = CPU Board Slot D (Cheetah 5, DCDS [0-7], SRAMs) Scan Ring NOT Present or Shut OFF
0:0>
0:0>INFO: H/W under test = CPU Board Slot C (Cheetah 6, SRAMs) Scan Ring NOT Present or Shut OFF
0:0>
0:0>INFO: H/W under test = CPU Board Slot D (Cheetah 7, SRAMs) Scan Ring NOT Present or Shut OFF
0:0>Set Trip Temp CPU 0 to 110C
0:0>Set Trip Temp CPU 1 to 110C
0:0>Set Trip Temp CPU 2 to 110C
0:0>Set Trip Temp CPU 3 to 110C
0:0>MON APR  23 8:18:12 GMT 12
0:0>Safari quick check
0:0>         to IO-bridge_0
0:0>         to IO-bridge_1
0:0>Safari full  check
0:0>         to IO-bridge_0
0:0>         to IO-bridge_1
0:0>Disable CPU 0 error checking
0:0>Disable CPU 1 error checking
0:0>Disable CPU 2 error checking
0:0>Disable CPU 3 error checking
0:0>Basic Memory Test.....
0:0>Probe and Setup Memory
0:0>INFO:           512MB Bank 0
0:0>INFO:           512MB Bank 1
0:0>INFO:           512MB Bank 2
0:0>INFO:           512MB Bank 3
0:0>
0:0>Data Bitwalk on Master
0:0>        Test Bank 0.
0:0>        Test Bank 1.
0:0>        Test Bank 2.
0:0>        Test Bank 3.
0:0>Address Bitwalk on Master
0:0>
0:0>INFO: Addr walk mem test on CPU 0:0 Bank 0: 00000000.00000000 to 00000000.20000000.
0:0>
0:0>INFO: Addr walk mem test on CPU 0:0 Bank 1: 00000001.00000000 to 00000001.20000000.
0:0>
0:0>INFO: Addr walk mem test on CPU 0:0 Bank 2: 00000002.00000000 to 00000002.20000000.
0:0>
0:0>INFO: Addr walk mem test on CPU 0:0 Bank 3: 00000003.00000000 to 00000003.20000000.
0:0>Set Mailbox
0:0>Setup Final DMMU Entries
0:0>Post Image Region Scrub
0:0>Run POST from Memory
0:0>Verifying checksum on copied image.
0:0>The Memory's CHECKSUM value is 7c60.
0:0>The Memory's Content Size value is a06f4.
0:0>Success...  Checksum on Memory Validated.
1:0>Safari quick check
1:0>         to IO-bridge_0
1:0>         to IO-bridge_1
1:0>Safari full  check
1:0>         to IO-bridge_0
1:0>         to IO-bridge_1
2:0>Safari quick check
2:0>         to IO-bridge_0
2:0>         to IO-bridge_1
2:0>Safari full  check
2:0>         to IO-bridge_0
2:0>         to IO-bridge_1
3:0>Safari quick check
3:0>         to IO-bridge_0
3:0>         to IO-bridge_1
3:0>Safari full  check
3:0>         to IO-bridge_0
3:0>         to IO-bridge_1
1:0>Probe and Setup Memory
2:0>Probe and Setup Memory
3:0>Probe and Setup Memory
1:0>INFO:           512MB Bank 0
1:0>INFO:           512MB Bank 1
1:0>INFO:           512MB Bank 2
1:0>INFO:           512MB Bank 3
1:0>
2:0>INFO:           512MB Bank 0
2:0>INFO:           512MB Bank 1
2:0>INFO:           512MB Bank 2
2:0>INFO:           512MB Bank 3
2:0>
3:0>INFO:           512MB Bank 0
3:0>INFO:           512MB Bank 1
3:0>INFO:           512MB Bank 2
3:0>INFO:           512MB Bank 3
3:0>
1:0>Set Mailbox
2:0>Set Mailbox
3:0>Set Mailbox
0:0>Data Bitwalk on Slave 1
0:0>        Test Bank 0.
0:0>        Test Bank 1.
0:0>        Test Bank 2.
0:0>        Test Bank 3.
0:0>Data Bitwalk on Slave 2
0:0>        Test Bank 0.
0:0>        Test Bank 1.
0:0>        Test Bank 2.
0:0>        Test Bank 3.
0:0>Data Bitwalk on Slave 3
0:0>        Test Bank 0.
0:0>        Test Bank 1.
0:0>        Test Bank 2.
0:0>        Test Bank 3.
0:0>Address Bitwalk on Slave 1
0:0>
0:0>INFO: Addr walk mem test on CPU 1:0 Bank 0: 00000010.00000000 to 00000010.20000000.
0:0>
0:0>INFO: Addr walk mem test on CPU 1:0 Bank 1: 00000011.00000000 to 00000011.20000000.
0:0>
0:0>INFO: Addr walk mem test on CPU 1:0 Bank 2: 00000012.00000000 to 00000012.20000000.
0:0>
0:0>INFO: Addr walk mem test on CPU 1:0 Bank 3: 00000013.00000000 to 00000013.20000000.
0:0>Address Bitwalk on Slave 2
0:0>
0:0>INFO: Addr walk mem test on CPU 2:0 Bank 0: 00000020.00000000 to 00000020.20000000.
0:0>
0:0>INFO: Addr walk mem test on CPU 2:0 Bank 1: 00000021.00000000 to 00000021.20000000.
0:0>
0:0>INFO: Addr walk mem test on CPU 2:0 Bank 2: 00000022.00000000 to 00000022.20000000.
0:0>
0:0>INFO: Addr walk mem test on CPU 2:0 Bank 3: 00000023.00000000 to 00000023.20000000.
0:0>Address Bitwalk on Slave 3
0:0>
0:0>INFO: Addr walk mem test on CPU 3:0 Bank 0: 00000030.00000000 to 00000030.20000000.
0:0>
0:0>INFO: Addr walk mem test on CPU 3:0 Bank 1: 00000031.00000000 to 00000031.20000000.
0:0>
0:0>INFO: Addr walk mem test on CPU 3:0 Bank 2: 00000032.00000000 to 00000032.20000000.
0:0>
0:0>INFO: Addr walk mem test on CPU 3:0 Bank 3: 00000033.00000000 to 00000033.20000000.
1:0>Setup Final DMMU Entries
2:0>Setup Final DMMU Entries
3:0>Setup Final DMMU Entries
1:0>Map Slave POST to master memory
2:0>Map Slave POST to master memory
3:0>Map Slave POST to master memory
1:0>Print Mem Config
1:0>Caches : Icache is ON, Dcache is ON, Wcache is ON, Pcache is ON.
1:0>Memory in non-interleave config:
1:0>        Bank 0    512MB : 00000010.00000000 -> 00000010.20000000.
1:0>        Bank 1    512MB : 00000011.00000000 -> 00000011.20000000.
1:0>        Bank 2    512MB : 00000012.00000000 -> 00000012.20000000.
1:0>        Bank 3    512MB : 00000013.00000000 -> 00000013.20000000.
2:0>Print Mem Config
2:0>Caches : Icache is ON, Dcache is ON, Wcache is ON, Pcache is ON.
2:0>Memory in non-interleave config:
2:0>        Bank 0    512MB : 00000020.00000000 -> 00000020.20000000.
2:0>        Bank 1    512MB : 00000021.00000000 -> 00000021.20000000.
2:0>        Bank 2    512MB : 00000022.00000000 -> 00000022.20000000.
2:0>        Bank 3    512MB : 00000023.00000000 -> 00000023.20000000.
3:0>Print Mem Config
3:0>Caches : Icache is ON, Dcache is ON, Wcache is ON, Pcache is ON.
3:0>Memory in non-interleave config:
3:0>        Bank 0    512MB : 00000030.00000000 -> 00000030.20000000.
3:0>        Bank 1    512MB : 00000031.00000000 -> 00000031.20000000.
3:0>        Bank 2    512MB : 00000032.00000000 -> 00000032.20000000.
3:0>        Bank 3    512MB : 00000033.00000000 -> 00000033.20000000.
0:0>Memory Block.....
1:0>Scrub Memory
2:0>Scrub Memory
3:0>Scrub Memory
0:0>Print Mem Config
0:0>Caches : Icache is ON, Dcache is ON, Wcache is ON, Pcache is ON.
0:0>Memory in non-interleave config:
0:0>        Bank 0    512MB : 00000000.00000000 -> 00000000.20000000.
0:0>        Bank 1    512MB : 00000001.00000000 -> 00000001.20000000.
0:0>        Bank 2    512MB : 00000002.00000000 -> 00000002.20000000.
0:0>        Bank 3    512MB : 00000003.00000000 -> 00000003.20000000.
0:0>Scrub Memory
1:0>Quick Block Mem Test
2:0>Quick Block Mem Test
3:0>Quick Block Mem Test
1:0>Quick Test 16777216 bytes at 00000010.00000000
2:0>Quick Test 16777216 bytes at 00000020.00000000
3:0>Quick Test 16777216 bytes at 00000030.00000000
0:0>Quick Block Mem Test
0:0>Quick Test 16777216 bytes at 00000000.00600000
0:0>40% Done...
1:0>Flush Caches
2:0>Flush Caches
3:0>Flush Caches
0:0>Flush Caches
1:0>Get code in ecache.
2:0>Get code in ecache.
3:0>Get code in ecache.
0:0>Get code in ecache.
0:0>IO-Bridge Tests.....
0:0>IO-Bridge unit 0 init      test   
0:0>IO-Bridge unit 1 init      test   
0:0>IO-Bridge unit 0 reg       test   
0:0>IO-Bridge unit 0 mem       test   
0:0>IO-Bridge unit 0 PCI DMA A test   
0:0>IO-Bridge unit 0 PCI DMA B test   
0:0>IO-Bridge unit 0 PCI merg  test   
0:0>IO-Bridge unit 0 PCI iommu test   
0:0>IO-Bridge unit 0 PCI stc   test   
0:0>IO-Bridge unit 0 interrupt test   
0:0>IO-Bridge unit 1 reg       test   
0:0>IO-Bridge unit 1 mem       test   
0:0>IO-Bridge unit 1 PCI DMA C test   
0:0>IO-Bridge unit 1 PCI DMA D test   
0:0>IO-Bridge unit 1 PCI merg  test   
0:0>IO-Bridge unit 1 PCI iommu test   
0:0>IO-Bridge unit 1 PCI stc   test   
0:0>IO-Bridge unit 1 interrupt test   
1:0>IO-Bridge unit 0 init      test   
1:0>IO-Bridge unit 0 PCI merg  test   
1:0>IO-Bridge unit 0 interrupt test   
1:0>IO-Bridge unit 1 init      test   
1:0>IO-Bridge unit 1 PCI merg  test   
1:0>IO-Bridge unit 1 interrupt test   
2:0>IO-Bridge unit 0 init      test   
2:0>IO-Bridge unit 0 PCI merg  test   
2:0>IO-Bridge unit 0 interrupt test   
2:0>IO-Bridge unit 1 init      test   
2:0>IO-Bridge unit 1 PCI merg  test   
2:0>IO-Bridge unit 1 interrupt test   
3:0>IO-Bridge unit 0 init      test   
3:0>IO-Bridge unit 0 PCI merg  test   
3:0>IO-Bridge unit 0 interrupt test   
3:0>IO-Bridge unit 1 init      test   
3:0>IO-Bridge unit 1 PCI merg  test   
3:0>IO-Bridge unit 1 interrupt test   
1:0>FPU Registers and Data Path
1:0>FPU Move Registers
2:0>FPU Registers and Data Path
3:0>FPU Registers and Data Path
0:0>FPU Registers and Data Path
1:0>FSR Read/Write
2:0>FPU Move Registers
3:0>FPU Move Registers
0:0>FPU Move Registers
1:0>FPU BLOCK REG TEST
2:0>FSR Read/Write
3:0>FSR Read/Write
0:0>FSR Read/Write
2:0>FPU BLOCK REG TEST
3:0>FPU BLOCK REG TEST
0:0>FPU BLOCK REG TEST
0:0>

zhouwei4479

0:0>Motherboard/Centerplane Board Part Number:   
0:0>        5016771-01-50
0:0>IO/Riser Board Part Number:   
0:0>        5015142-20-52
0:0>CPUA Board Part Number:   
0:0>        5016164-02-55
0:0>CPUB Board Part Number:   
0:0>        5016164-02-55
0:0>CPUC Board Part Number:   
0:0>
0:0>INFO: Unpopulated Slot
0:0>CPUD Board Part Number:   
0:0>
0:0>INFO: Unpopulated Slot
0:0>Enable Errors.....
0:0>Turn IO-Bridge 0 errors on
0:0>Turn IO-Bridge 1 errors on
0:0>Turn CPU 0 errors on
0:0>Turn CPU 1 errors on
0:0>Turn CPU 2 errors on
0:0>Turn CPU 3 errors on
0:0>Turn Module A DCDS errors on
0:0>Turn Module B DCDS errors on
0:0>Turn DCS errors on
0:0>Turn DAR errors on
0:0>Turn error traps on
0:0>INFO:
0:0>        POST Passed all devices.
0:0>POST:        Return to OBP.


CPU0: System Power On Selftest Completed
    Pass/Fail Status  = 0000.0000.0000.0000
    ESB Overall Status  = ffff.ffff.ffff.ffff


<*>
POST Reset

@(#)OBP 4.13.0 2004/01/19 18:26 Sun Fire 880
Front Panel Keyswitch is in Diagnostic position.
Online:  CPU0 Ultra-III+ (v11.1) 8:1 1200MHz 8MB 4:1 ECache
Online:  CPU1 Ultra-III+ (v11.1) 8:1 1200MHz 8MB 4:1 ECache
Online:  CPU2 Ultra-III+ (v11.1) 8:1 1200MHz 8MB 4:1 ECache
Online: *CPU3 Ultra-III+ (v11.1) 8:1 1200MHz 8MB 4:1 ECache
Configuring CPUs..........
... CPU0 Rated Speed 1200MHz, Safari 150MHz, want 8:1, got 8:1 ==> CPU 1200MHz
         Ecache 8MB 3.3ns mode=5-4-4 2-way ECCR: 0000.0000.0343.4c00
... CPU1 Rated Speed 1200MHz, Safari 150MHz, want 8:1, got 8:1 ==> CPU 1200MHz
         Ecache 8MB 3.3ns mode=5-4-4 2-way ECCR: 0000.0000.0343.4c00
... CPU2 Rated Speed 1200MHz, Safari 150MHz, want 8:1, got 8:1 ==> CPU 1200MHz
         Ecache 8MB 3.3ns mode=5-4-4 2-way ECCR: 0000.0000.0343.4c00
... CPU3 Rated Speed 1200MHz, Safari 150MHz, want 8:1, got 8:1 ==> CPU 1200MHz
         Ecache 8MB 3.3ns mode=5-4-4 2-way ECCR: 0000.0000.0343.4c00 Done
<*>
CPU Configuration Reset

@(#)OBP 4.13.0 2004/01/19 18:26 Sun Fire 880
Front Panel Keyswitch is in Diagnostic position.
Online:  CPU0 Ultra-III+ (v11.1) 8:1 1200MHz 8MB 4:1 ECache
Online:  CPU1 Ultra-III+ (v11.1) 8:1 1200MHz 8MB 4:1 ECache
Online:  CPU2 Ultra-III+ (v11.1) 8:1 1200MHz 8MB 4:1 ECache
Online: *CPU3 Ultra-III+ (v11.1) 8:1 1200MHz 8MB 4:1 ECache
Enabling Safari .......... CPU0 CPU1 CPU2 CPU3 Done
Probing Memory............
Probing CPU0 memory configuration
  NGDIMM#0 part# 501-5401-03 serial# 503F48,  128MB + 128MB,  SC#0
  NGDIMM#1 part# 501-5401-03 serial# 504714,  128MB + 128MB,  SC#0
  NGDIMM#2 part# 501-5401-03 serial# 503F42,  128MB + 128MB,  SC#0
  NGDIMM#3 part# 501-5401-03 serial# 5046DA,  128MB + 128MB,  SC#0
  NGDIMM#4 part# 501-5401-03 serial# 503F71,  128MB + 128MB,  SC#0
  NGDIMM#5 part# 501-5401-03 serial# 503F59,  128MB + 128MB,  SC#0
  NGDIMM#6 part# 501-5401-03 serial# 503F4B,  128MB + 128MB,  SC#0
  NGDIMM#7 part# 501-5401-03 serial# 503F4D,  128MB + 128MB,  SC#0
Probing CPU1 memory configuration
  NGDIMM#0 part# 501-5401-03 serial# 4F20BB,  128MB + 128MB,  SC#0
  NGDIMM#1 part# 501-5401-03 serial# 4F20BD,  128MB + 128MB,  SC#0
  NGDIMM#2 part# 501-5401-03 serial# 4F211C,  128MB + 128MB,  SC#0
  NGDIMM#3 part# 501-5401-03 serial# 4F20FA,  128MB + 128MB,  SC#0
  NGDIMM#4 part# 501-5401-03 serial# 4F21D3,  128MB + 128MB,  SC#0
  NGDIMM#5 part# 501-5401-03 serial# 4F21CE,  128MB + 128MB,  SC#0
  NGDIMM#6 part# 501-5401-03 serial# 4F25F5,  128MB + 128MB,  SC#0
  NGDIMM#7 part# 501-5401-03 serial# 4F20FC,  128MB + 128MB,  SC#0
Probing CPU2 memory configuration
  NGDIMM#0 part# 501-5401-03 serial# 503F78,  128MB + 128MB,  SC#0
  NGDIMM#1 part# 501-5401-03 serial# 504712,  128MB + 128MB,  SC#0
  NGDIMM#2 part# 501-5401-03 serial# 503EEC,  128MB + 128MB,  SC#0
  NGDIMM#3 part# 501-5401-03 serial# 5046DC,  128MB + 128MB,  SC#0
  NGDIMM#4 part# 501-5401-03 serial# 503F56,  128MB + 128MB,  SC#0
  NGDIMM#5 part# 501-5401-03 serial# 503EEF,  128MB + 128MB,  SC#0
  NGDIMM#6 part# 501-5401-03 serial# 503F5A,  128MB + 128MB,  SC#0
  NGDIMM#7 part# 501-5401-03 serial# 503F55,  128MB + 128MB,  SC#0
Probing CPU3 memory configuration
  NGDIMM#0 part# 501-5401-03 serial# 4F210D,  128MB + 128MB,  SC#0
  NGDIMM#1 part# 501-5401-03 serial# 4F20B7,  128MB + 128MB,  SC#0
  NGDIMM#2 part# 501-5401-03 serial# 4F20E2,  128MB + 128MB,  SC#0
  NGDIMM#3 part# 501-5401-03 serial# 4F25ED,  128MB + 128MB,  SC#0
  NGDIMM#4 part# 501-5401-03 serial# 4F210E,  128MB + 128MB,  SC#0
  NGDIMM#5 part# 501-5401-03 serial# 4F20F9,  128MB + 128MB,  SC#0
  NGDIMM#6 part# 501-5401-03 serial# 4F2113,  128MB + 128MB,  SC#0
  NGDIMM#7 part# 501-5401-03 serial# 4F2137,  128MB + 128MB,  SC#0
Mungeing Memory...........Done
HiMem: 0000.00b0.0000.0000, size: 0000.0001.0000.0000
Configuring Memory........ CPU0 CPU1 CPU2 CPU3 Done
Init ICache/etc........... CPU0 CPU1 CPU2 CPU3 Done
Init ECache Tags.......... CPU0 CPU1 CPU2 CPU3 Done
Clearing TLBs............. CPU0 CPU1 CPU2 CPU3 Done
Setup I/DTLBs............. CPU0 CPU1 CPU2 CPU3 Done
Enabling Cache/MMUs....... CPU0 CPU1 CPU2 CPU3 Done
Init ECache Data.......... CPU0 CPU1 CPU2 CPU3 Done
Zeroing memory...Done
Copying FLASHRAM to memory...Verifying base 96KB...Done
Jumping into RAM (leaving slave CPUs in ROM)
RAM CRC = 0000.0000.2ae3.c2b0;  ROM CRC = 0000.0000.2ae3.c2b0
Dropping in...
Find dropin, Decompressing Done, Size 0000.0000.0007.7850 (479KB)
Slave CPUs starting Forth at 0000.0000.f000.00e0
Boot  CPU3 starting Forth at 0000.0000.f000.00e0

ttya initialized
Probing gptwo at 0,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
   memory-controller
Probing gptwo at 1,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
   memory-controller
Probing gptwo at 2,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
   memory-controller
Probing gptwo at 3,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
   memory-controller
Probing gptwo at 4,0 Nothing there
Probing gptwo at 5,0 Nothing there
Probing gptwo at 6,0 Nothing there
Probing gptwo at 7,0 Nothing there
Probing gptwo at 8,0 pci pci
Probing gptwo at 9,0 pci pci
Loading Support Packages: kbd-translator obp-tftp SUNW,i2c-ram-device
   SUNW,fru-device
Loading onboard drivers: ebus flashprom bbc power i2c fru fru fru fru
   fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru
   fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru i2c
   controller smbus-ara controller temperature temperature temperature
   ioexp temperature adio adio ioexp ioexp ioexp ioexp ioexp ioexp
   ioexp adio adio adio adio temperature-sensor fru fru fru fru fru fru
   rscrtc hotplug-controller hotplug-controller hotplug-controller
   hotplug-controller bbc i2c i2c nvram idprom rtc gpio pmc rsc-control
   rsc-console serial
Memory Configuration:
CPU0 Bank0  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #0
CPU0 Bank1  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #2
CPU0 Bank2  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #4
CPU0 Bank3  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #6
CPU1 Bank0  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #0
CPU1 Bank1  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #2
CPU1 Bank2  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #4
CPU1 Bank3  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #6
CPU2 Bank0  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #1
CPU2 Bank1  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #3
CPU2 Bank2  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #5
CPU2 Bank3  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #7
CPU3 Bank0  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #1
CPU3 Bank1  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #3
CPU3 Bank2  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #5
CPU3 Bank3  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #7
Probing /pci@8,600000 Device 1  network
Probing /pci@8,600000 Device 2  SUNW,qlc fp disk
Probing /pci@8,700000 Device 1  scsi disk tape
Probing /pci@8,700000 Device 2  Nothing there
Probing /pci@8,700000 Device 3  Nothing there
Probing /pci@8,700000 Device 4  Nothing there
Probing /pci@8,700000 Device 5  SUNW,XVR-100
Probing /pci@9,600000 Device 1  Nothing there
Probing /pci@9,600000 Device 2  Nothing there
Probing /pci@9,700000 Device 1  network usb
Probing /pci@9,700000 Device 2  Nothing there
Probing /pci@9,700000 Device 3  pci
Probing /pci@9,700000/pci@3 Device 0  network
Probing /pci@9,700000/pci@3 Device 1  Nothing there
Probing /pci@9,700000/pci@3 Device 2  Nothing there
Probing /pci@9,700000/pci@3 Device 3  Nothing there
Probing /pci@9,700000/pci@3 Device 4  Nothing there
Probing /pci@9,700000/pci@3 Device 5  Nothing there
Probing /pci@9,700000/pci@3 Device 6  Nothing there
Probing /pci@9,700000/pci@3 Device 7  Nothing there
Probing /pci@9,700000/pci@3 Device 8  Nothing there
Probing /pci@9,700000/pci@3 Device 9  Nothing there
Probing /pci@9,700000/pci@3 Device a  Nothing there
Probing /pci@9,700000/pci@3 Device b  Nothing there
Probing /pci@9,700000/pci@3 Device c  Nothing there
Probing /pci@9,700000/pci@3 Device d  Nothing there
Probing /pci@9,700000/pci@3 Device e  Nothing there
Probing /pci@9,700000/pci@3 Device f  Nothing there
Probing /pci@9,700000 Device 4  Nothing there

Probing gptwo at 0,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
   memory-controller
Probing gptwo at 1,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
   memory-controller
Probing gptwo at 2,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
   memory-controller
Probing gptwo at 3,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
   memory-controller
Probing gptwo at 4,0 Nothing there
Probing gptwo at 5,0 Nothing there
Probing gptwo at 6,0 Nothing there
Probing gptwo at 7,0 Nothing there
Probing gptwo at 8,0 pci pci
Probing gptwo at 9,0 pci pci
Loading Support Packages: kbd-translator obp-tftp SUNW,i2c-ram-device
   SUNW,fru-device
Loading onboard drivers: ebus flashprom bbc power i2c fru fru fru fru
   fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru
   fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru i2c
   controller smbus-ara controller temperature temperature temperature
   ioexp temperature adio adio ioexp ioexp ioexp ioexp ioexp ioexp
   ioexp adio adio adio adio temperature-sensor fru fru fru fru fru fru
   rscrtc hotplug-controller hotplug-controller hotplug-controller
   hotplug-controller bbc i2c i2c nvram idprom rtc gpio pmc rsc-control
   rsc-console serial
Memory Configuration:
CPU0 Bank0  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #0
CPU0 Bank1  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #2
CPU0 Bank2  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #4
CPU0 Bank3  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #6
CPU1 Bank0  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #0
CPU1 Bank1  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #2
CPU1 Bank2  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #4
CPU1 Bank3  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #6
CPU2 Bank0  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #1
CPU2 Bank1  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #3
CPU2 Bank2  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #5
CPU2 Bank3  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #7
CPU3 Bank0  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #1
CPU3 Bank1  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #3
CPU3 Bank2  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #5
CPU3 Bank3  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #7
Probing /pci@8,600000 Device 1  network
Probing /pci@8,600000 Device 2  SUNW,qlc fp disk
Probing /pci@8,700000 Device 1  scsi disk tape
Probing /pci@8,700000 Device 2  Nothing there
Probing /pci@8,700000 Device 3  Nothing there
Probing /pci@8,700000 Device 4  Nothing there
Probing /pci@8,700000 Device 5  SUNW,XVR-100
Probing /pci@9,600000 Device 1  Nothing there
Probing /pci@9,600000 Device 2  Nothing there
Probing /pci@9,700000 Device 1  network usb
Probing /pci@9,700000 Device 2  Nothing there
Probing /pci@9,700000 Device 3  pci
Probing /pci@9,700000/pci@3 Device 0  network
Probing /pci@9,700000/pci@3 Device 1  Nothing there
Probing /pci@9,700000/pci@3 Device 2  Nothing there
Probing /pci@9,700000/pci@3 Device 3  Nothing there
Probing /pci@9,700000/pci@3 Device 4  Nothing there
Probing /pci@9,700000/pci@3 Device 5  Nothing there
Probing /pci@9,700000/pci@3 Device 6  Nothing there
Probing /pci@9,700000/pci@3 Device 7  Nothing there
Probing /pci@9,700000/pci@3 Device 8  Nothing there
Probing /pci@9,700000/pci@3 Device 9  Nothing there
Probing /pci@9,700000/pci@3 Device a  Nothing there
Probing /pci@9,700000/pci@3 Device b  Nothing there
Probing /pci@9,700000/pci@3 Device c  Nothing there
Probing /pci@9,700000/pci@3 Device d  Nothing there
Probing /pci@9,700000/pci@3 Device e  Nothing there
Probing /pci@9,700000/pci@3 Device f  Nothing there
Probing /pci@9,700000 Device 4  Nothing there


Sun Fire 880, No Keyboard
Copyright 1998-2004 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.13.0, 8192 MB memory installed, Serial #58208373.
Ethernet address 0:3:ba:78:30:75, Host ID: 83783075.



Creating CPU memory layout properties.


Running diagnostic script obdiag/normal

zhouwei4479

Testing /pci@8,600000/network@1
Testing /pci@8,600000/SUNW,qlc@2
Testing /pci@9,700000/ebus@1/i2c@1,2e
Testing /pci@9,700000/ebus@1/i2c@1,30
Testing /pci@9,700000/ebus@1/i2c@1,50002e
Testing /pci@9,700000/ebus@1/i2c@1,500030
Testing /pci@9,700000/ebus@1/bbc@1,0
Testing /pci@9,700000/ebus@1/bbc@1,500000
Testing /pci@8,700000/scsi@1
Testing /pci@9,700000/network@1,1
Testing /pci@9,700000/usb@1,3
Testing /pci@9,700000/ebus@1/gpio@1,300600
Testing /pci@9,700000/ebus@1/pmc@1,300700
Testing /pci@9,700000/ebus@1/rtc@1,300070


Initializing     1MB of memory at addr        b0ffb6c000 -
                                                                     
Initializing     1MB of memory at addr        b0ffb60000 -
                                                                     
Initializing    12MB of memory at addr        b0ff000000 -
                                                                     
Initializing  4080MB of memory at addr        b000000000 -
                                                                     
Initializing     4GB of memory at addr        a000000000 \|/-\|/-
                                                                     
Reading temperature limits from FRUPROMs: CPU0/2 CPU1/3 MB I/O DBP0
Environmental monitor is ON
Resetting ...


<*>
Firmware I/O Diagnostics Reset

@(#)OBP 4.13.0 2004/01/19 18:26 Sun Fire 880
Front Panel Keyswitch is in Diagnostic position.
Online:  CPU0 Ultra-III+ (v11.1) 8:1 1200MHz 8MB 4:1 ECache
Online:  CPU1 Ultra-III+ (v11.1) 8:1 1200MHz 8MB 4:1 ECache
Online:  CPU2 Ultra-III+ (v11.1) 8:1 1200MHz 8MB 4:1 ECache
Online: *CPU3 Ultra-III+ (v11.1) 8:1 1200MHz 8MB 4:1 ECache
Enabling Safari .......... CPU0 CPU1 CPU2 CPU3 Done
Init ICache/etc........... CPU0 CPU1 CPU2 CPU3 Done
Init ECache Tags.......... CPU0 CPU1 CPU2 CPU3 Done
Clearing TLBs............. CPU0 CPU1 CPU2 CPU3 Done
Setup I/DTLBs............. CPU0 CPU1 CPU2 CPU3 Done
Enabling Cache/MMUs....... CPU0 CPU1 CPU2 CPU3 Done
Init ECache Data.......... CPU0 CPU1 CPU2 CPU3 Done
Zeroing memory...Done
Copying FLASHRAM to memory...Verifying base 96KB...Done
Jumping into RAM (leaving slave CPUs in ROM)
RAM CRC = 0000.0000.2ae3.c2b0;  ROM CRC = 0000.0000.2ae3.c2b0
Dropping in...
Find dropin, Decompressing Done, Size 0000.0000.0007.7850 (479KB)
Slave CPUs starting Forth at 0000.0000.f000.00e0
Boot  CPU3 starting Forth at 0000.0000.f000.00e0

ttya initialized
Probing gptwo at 0,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
   memory-controller
Probing gptwo at 1,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
   memory-controller
Probing gptwo at 2,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
   memory-controller
Probing gptwo at 3,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
   memory-controller
Probing gptwo at 4,0 Nothing there
Probing gptwo at 5,0 Nothing there
Probing gptwo at 6,0 Nothing there
Probing gptwo at 7,0 Nothing there
Probing gptwo at 8,0 pci pci
Probing gptwo at 9,0 pci pci
Loading Support Packages: kbd-translator obp-tftp SUNW,i2c-ram-device
   SUNW,fru-device
Loading onboard drivers: ebus flashprom bbc power i2c fru fru fru fru
   fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru
   fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru i2c
   controller smbus-ara controller temperature temperature temperature
   ioexp temperature adio adio ioexp ioexp ioexp ioexp ioexp ioexp
   ioexp adio adio adio adio temperature-sensor fru fru fru fru fru fru
   rscrtc hotplug-controller hotplug-controller hotplug-controller
   hotplug-controller bbc i2c i2c nvram idprom rtc gpio pmc rsc-control
   rsc-console serial
Memory Configuration:
CPU0 Bank0  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #0
CPU0 Bank1  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #2
CPU0 Bank2  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #4
CPU0 Bank3  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #6
CPU1 Bank0  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #0
CPU1 Bank1  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #2
CPU1 Bank2  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #4
CPU1 Bank3  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #6
CPU2 Bank0  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #1
CPU2 Bank1  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #3
CPU2 Bank2  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #5
CPU2 Bank3  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #7
CPU3 Bank0  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #1
CPU3 Bank1  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #3
CPU3 Bank2  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #5
CPU3 Bank3  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #7
Probing /pci@8,600000 Device 1  network
Probing /pci@8,600000 Device 2  SUNW,qlc fp disk
Probing /pci@8,700000 Device 1  scsi disk tape
Probing /pci@8,700000 Device 2  Nothing there
Probing /pci@8,700000 Device 3  Nothing there
Probing /pci@8,700000 Device 4  Nothing there
Probing /pci@8,700000 Device 5  SUNW,XVR-100
Probing /pci@9,600000 Device 1  Nothing there
Probing /pci@9,600000 Device 2  Nothing there
Probing /pci@9,700000 Device 1  network usb
Probing /pci@9,700000 Device 2  Nothing there
Probing /pci@9,700000 Device 3  pci
Probing /pci@9,700000/pci@3 Device 0  network
Probing /pci@9,700000/pci@3 Device 1  Nothing there
Probing /pci@9,700000/pci@3 Device 2  Nothing there
Probing /pci@9,700000/pci@3 Device 3  Nothing there
Probing /pci@9,700000/pci@3 Device 4  Nothing there
Probing /pci@9,700000/pci@3 Device 5  Nothing there
Probing /pci@9,700000/pci@3 Device 6  Nothing there
Probing /pci@9,700000/pci@3 Device 7  Nothing there
Probing /pci@9,700000/pci@3 Device 8  Nothing there
Probing /pci@9,700000/pci@3 Device 9  Nothing there
Probing /pci@9,700000/pci@3 Device a  Nothing there
Probing /pci@9,700000/pci@3 Device b  Nothing there
Probing /pci@9,700000/pci@3 Device c  Nothing there
Probing /pci@9,700000/pci@3 Device d  Nothing there
Probing /pci@9,700000/pci@3 Device e  Nothing there
Probing /pci@9,700000/pci@3 Device f  Nothing there
Probing /pci@9,700000 Device 4  Nothing there

Probing gptwo at 0,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
   memory-controller
Probing gptwo at 1,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
   memory-controller
Probing gptwo at 2,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
   memory-controller
Probing gptwo at 3,0 SUNW,UltraSPARC-III+ (1200 MHz @ 8:1, 8 MB)
   memory-controller
Probing gptwo at 4,0 Nothing there
Probing gptwo at 5,0 Nothing there
Probing gptwo at 6,0 Nothing there
Probing gptwo at 7,0 Nothing there
Probing gptwo at 8,0 pci pci
Probing gptwo at 9,0 pci pci
Loading Support Packages: kbd-translator obp-tftp SUNW,i2c-ram-device
   SUNW,fru-device
Loading onboard drivers: ebus flashprom bbc power i2c fru fru fru fru
   fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru
   fru fru fru fru fru fru fru fru fru fru fru fru fru fru fru i2c
   controller smbus-ara controller temperature temperature temperature
   ioexp temperature adio adio ioexp ioexp ioexp ioexp ioexp ioexp
   ioexp adio adio adio adio temperature-sensor fru fru fru fru fru fru
   rscrtc hotplug-controller hotplug-controller hotplug-controller
   hotplug-controller bbc i2c i2c nvram idprom rtc gpio pmc rsc-control
   rsc-console serial
Memory Configuration:
CPU0 Bank0  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #0
CPU0 Bank1  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #2
CPU0 Bank2  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #4
CPU0 Bank3  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #6
CPU1 Bank0  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #0
CPU1 Bank1  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #2
CPU1 Bank2  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #4
CPU1 Bank3  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #6
CPU2 Bank0  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #1
CPU2 Bank1  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #3
CPU2 Bank2  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #5
CPU2 Bank3  128 +  128 +  128 +  128 :  512MB @  a000000000  8-way #7
CPU3 Bank0  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #1
CPU3 Bank1  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #3
CPU3 Bank2  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #5
CPU3 Bank3  128 +  128 +  128 +  128 :  512MB @  b000000000  8-way #7
Probing /pci@8,600000 Device 1  network
Probing /pci@8,600000 Device 2  SUNW,qlc fp disk
Probing /pci@8,700000 Device 1  scsi disk tape
Probing /pci@8,700000 Device 2  Nothing there
Probing /pci@8,700000 Device 3  Nothing there
Probing /pci@8,700000 Device 4  Nothing there
Probing /pci@8,700000 Device 5  SUNW,XVR-100
Probing /pci@9,600000 Device 1  Nothing there
Probing /pci@9,600000 Device 2  Nothing there
Probing /pci@9,700000 Device 1  network usb
Probing /pci@9,700000 Device 2  Nothing there
Probing /pci@9,700000 Device 3  pci
Probing /pci@9,700000/pci@3 Device 0  network
Probing /pci@9,700000/pci@3 Device 1  Nothing there
Probing /pci@9,700000/pci@3 Device 2  Nothing there
Probing /pci@9,700000/pci@3 Device 3  Nothing there
Probing /pci@9,700000/pci@3 Device 4  Nothing there
Probing /pci@9,700000/pci@3 Device 5  Nothing there
Probing /pci@9,700000/pci@3 Device 6  Nothing there
Probing /pci@9,700000/pci@3 Device 7  Nothing there
Probing /pci@9,700000/pci@3 Device 8  Nothing there
Probing /pci@9,700000/pci@3 Device 9  Nothing there
Probing /pci@9,700000/pci@3 Device a  Nothing there
Probing /pci@9,700000/pci@3 Device b  Nothing there
Probing /pci@9,700000/pci@3 Device c  Nothing there
Probing /pci@9,700000/pci@3 Device d  Nothing there
Probing /pci@9,700000/pci@3 Device e  Nothing there
Probing /pci@9,700000/pci@3 Device f  Nothing there
Probing /pci@9,700000 Device 4  Nothing there


Sun Fire 880, No Keyboard
Copyright 1998-2004 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.13.0, 8192 MB memory installed, Serial #58208373.
Ethernet address 0:3:ba:78:30:75, Host ID: 83783075.



Creating CPU memory layout properties.

Initializing    12MB of memory at addr        b0ff000000 -
                                                                     
Initializing  4080MB of memory at addr        b000000000 -
                                                                     
Initializing     4GB of memory at addr        a000000000 \|/-\|/-
                                                                     
Reading temperature limits from FRUPROMs: CPU0/2 CPU1/3 MB I/O DBP0
Environmental monitor is ON
Rebooting with command: boot
Boot device: net  File and args:
Using Onboard Transceiver - Link Up.
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet

起不来啊

大侠帮忙看看啊！

zhouwei4479

然后找了一台测试机的硬盘，硬盘是好的没问题的，插上
ce1: DL_BIND_REQ failed: DL_OUTSTATE
ce1: DL_PHYS_ADDR_REQ failed: DL_OUTSTATE
ce1: DL_UNBIND_REQ failed: DL_OUTSTATE
Failed to plumb IPv4 interface(s): ce1
Apr 23 16:59:56 svc.startd[7]: svc:/network/physical:default: Method "/lib/svc/method/net-physical" failed with exit status 96.

Apr 23 16:59:56 svc.startd[7]: network/physical:default misconfigured: transitioned to maintenance (see 'svcs -xv' for details)

Hostname: host-t92
The / file system (/dev/rdsk/c1t0d0s0) is being checked.

WARNING - Unable to repair the / filesystem. Run fsck
manually (fsck -F ufs /dev/rdsk/c1t0d0s0).

Apr 23 16:59:57 svc.startd[7]: svc:/system/filesystem/usr:default: Method "/lib/svc/method/fs-usr" failed with exit status 95.

Apr 23 16:59:57 svc.startd[7]: system/filesystem/usr:default failed fatally: transitioned to maintenance (see 'svcs -xv' for details)

Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run

Root password for system maintenance (control-d to bypass):
single-user privilege assigned to /dev/console.
Entering System Maintenance Mode

Apr 23 17:00:01 su: 'su root' succeeded for root on /dev/console

Sun Microsystems Inc.        SunOS 5.10        Generic        January 2005
You have new mail.
Sourcing //.profile-EIS.....
[root@t92]ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000
[root@t92]cfgadm -al
cfgadm: 库错误: 设备库初始化失败: 设备未处于激活状态
[root@t92]fsck /dev/rdsk/c1t0d0s0
fsck: could not stat /dev/rdsk/c1t0d0s0: No such file or directory
[root@t92]format
Searching for disks...done
No disks found!

还是找不到硬盘。

最后boot cdrom装系统

到分区那一步的时候，能看到6块盘，真纠结，高手救命啊

znnnz

回复 2# zhouwei4479


     你这是自检完后自动从网络启动了，你手工停到OK，  probe-scsi-all，  然后boot  disk  引导。

zhouwei4479

回复 6# znnnz

大哥麻烦看完整。

启动文件坏了，系统起不来

现在的问题是从光盘起单用户，format找不到硬盘！

很奇怪啊。
   

东方蜘蛛

s7不会是/分区吧

zhouwei4479

不是啊，就算是S7是/，建metadb的时候，也会报错的。

昨天在另一块盘上装了solaris10，在多用户下，能看到6块盘。
但是从光盘起单用户，就找不到硬盘。

znnnz

回复 9# zhouwei4479


    首先你确定probe-scsi-all是否能看到盘?


    其次，请你不要用最新的solaris 10来光盘引导到单用户，这的确可能看不到盘。 我用最新的盘引导V440时发生过找不到硬盘的事。换了低版本的光盘就可以了。