- 论坛徽章:
- 0
|
load Image of Linux...Uncompressing Linux.................................................................................................................................. done, booting the kernel.
Linux version 2.6.29.4-FriendlyARM (hgj@hgj-desktop) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72) ) #1 Wed Jul 4 11:10:34 CST 2012
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
CPU: VIVT data cache, VIVT instruction cache
Machine: FriendlyARM Mini2440 development board
ATAG_INITRD is deprecated; please update your bootloader.
Memory policy: ECC disabled, Data cache writeback
CPU S3C2440A (id 0x32440001)
S3C24XX Clocks, (c) 2004 Simtec Electronics
S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: noinitrd root=/dev/mtdblock3 init=/linuxrc console=ttySAC0
irq: clearing subpending status 00000002
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
console [ttySAC0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 60608KB available (3724K code, 407K data, 128K init)
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 201.93 BogoMIPS (lpj=504832)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 296 bytes
NET: Registered protocol family 16
S3C2440: Initialising architecture
S3C2440: IRQ Support
S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
DMA channel 0 at c4808000, irq 33
DMA channel 1 at c4808040, irq 34
DMA channel 2 at c4808080, irq 35
DMA channel 3 at c48080c0, irq 36
S3C244X: Clock Support, DVS off
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 204
TCP reno registered
NET: Registered protocol family 1
yaffs Jul 4 2012 10:53:49 Installing.
msgmni has been set to 118
alg: No test for stdrng (krng)
io scheduler noop registered (default)
Console: switching to colour frame buffer device 30x20
fb0: s3c2410fb frame buffer device
backlight initialized
leds initialized
buttons initialized
pwm initialized
adc initialized
s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440
s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440
s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440
loop: module loaded
dm9000 Ethernet Driver, V1.31
Now use the default MAC address: 08:90:90:90:90:90
eth0 (dm9000): not using net_device_ops yet
eth0: dm9000e at c4810000,c4814004 IRQ 51 MAC: 08:90:90:90:90:90 (friendly-arm)
usbcore: registered new interface driver rt73usb
Linux video capture interface: v2.00
gspca: main v2.4.0 registered
usbcore: registered new interface driver conex
conex: registered
usbcore: registered new interface driver etoms
etoms: registered
usbcore: registered new interface driver finepix
finepix: registered
usbcore: registered new interface driver mars
mars: registered
usbcore: registered new interface driver ov519
ov519: registered
usbcore: registered new interface driver ov534
ov534: registered
usbcore: registered new interface driver pac207
pac207: registered
usbcore: registered new interface driver pac7311
pac7311: registered
usbcore: registered new interface driver sonixb
sonixb: registered
usbcore: registered new interface driver sonixj
sonixj: registered
usbcore: registered new interface driver spca500
spca500: registered
usbcore: registered new interface driver spca501
spca501: registered
usbcore: registered new interface driver spca505
spca505: registered
usbcore: registered new interface driver spca506
spca506: registered
usbcore: registered new interface driver spca508
spca508: registered
usbcore: registered new interface driver spca561
spca561: registered
usbcore: registered new interface driver sunplus
sunplus: registered
usbcore: registered new interface driver stk014
stk014: registered
usbcore: registered new interface driver t613
t613: registered
usbcore: registered new interface driver tv8532
tv8532: registered
usbcore: registered new interface driver vc032x
vc032x: registered
usbcore: registered new interface driver zc3xx
zc3xx: registered
usbcore: registered new interface driver ALi m5602
ALi m5602: registered
usbcore: registered new interface driver STV06xx
STV06xx: registered
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
initializing s3c2440 camera interface......
s3c2440 camif init done
Loading OV9650 driver.........
SCCB address 0x60, manufacture ID 0xFFFF, expect 0x7FA2
SCCB address 0x60, manufacture ID 0xFFFF, expect 0x7FA2
No OV9650 found!!!
Driver 'sd' needs updating - please use bus_type methods
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
s3c2440-nand s3c2440-nand: Tacls=3, 29ns Twrph0=7 69ns, Twrph1=3 29ns
NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit)
Scanning device for bad blocks
Creating 4 MTD partitions on "NAND 64MiB 3,3V 8-bit":
0x000000000000-0x000000060000 : "supervivi"
0x000000060000-0x000000260000 : "Kernel"
0x000000260000-0x000040260000 : "root"
mtd: partition "root" extends beyond the end of device "NAND 64MiB 3,3V 8-bit" -- size truncated to 0x3da0000
0x000000000000-0x000040000000 : "nand"
mtd: partition "nand" extends beyond the end of device "NAND 64MiB 3,3V 8-bit" -- size truncated to 0x4000000
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: S3C24XX OHCI
usb usb1: Manufacturer: Linux 2.6.29.4-FriendlyARM ohci_hcd
usb usb1: SerialNumber: s3c24xx
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
mice: PS/2 mouse device common for all mice
s3c2410 TouchScreen successfully loaded
input: s3c2410 TouchScreen as /devices/virtual/input/input0
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
i2c /dev entries driver
s3c2440-i2c s3c2440-i2c: slave address 0x10
s3c2440-i2c s3c2440-i2c: bus frequency set to 98 KHz
s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
mapped channel 0 to 0
s3c2440-sdi s3c2440-sdi: powered down.
s3c2440-sdi s3c2440-sdi: initialisation done.
s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
s3c2440-sdi s3c2440-sdi: running at 198kHz (requested: 197kHz).
s3c2440-sdi s3c2440-sdi: running at 198kHz (requested: 197kHz).
s3c2440-sdi s3c2440-sdi: running at 198kHz (requested: 197kHz).
s3c2440-sdi s3c2440-sdi: powered down.
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.18a.
No device for DAI UDA134X
No device for DAI s3c24xx-i2s
S3C24XX_UDA134X SoC Audio driver
UDA134X SoC Audio Codec
asoc: UDA134X <-> s3c24xx-i2s mapping ok
ALSA device list:
#0: S3C24XX_UDA134X (UDA134X)
TCP cubic registered
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
lib80211: common routines for IEEE802.11 drivers
s3c2410-rtc s3c2410-rtc: hctosys: invalid date/time
yaffs: dev is 32505859 name is "mtdblock3"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.3, "mtdblock3"
yaffs_read_super: isCheckpointed 0
VFS: Mounted root (yaffs filesystem) on device 31:3.
Freeing init memory: 128K
hwclock: settimeofday() failed: Invalid argument
[01/Jan/1970:00:00:09 +0000] boa: server version Boa/0.94.13
[01/Jan/1970:00:00:09 +0000] boa: server built Mar 26 2009 at 15:28:42.
[01/Jan/1970:00:00:09 +0000] boa: starting server pid=501, port 80
Try to bring eth0 interface up......eth0: link down
**>> yaffs chunk 32 was not erased
uncorrectable error : <4>**>> yaffs chunk 33 was not erased
**>> yaffs chunk 64 was not erased
uncorrectable error : <4>**>> yaffs chunk 65 was not erased
**>> yaffs chunk 96 was not erased
**>> yaffs chunk 97 was not erased
uncorrectable error : <4>**>> yaffs chunk 98 was not erased
uncorrectable error : <4>**>> yaffs chunk 128 was not erased
**>> yaffs chunk 160 was not erased
uncorrectable error : <4>**>> yaffs chunk 161 was not erased
uncorrectable error : <4>**>> yaffs chunk 192 was not erased
**>> yaffs chunk 224 was not erased
**>> yaffs chunk 225 was not erased
**>> yaffs chunk 226 was not erased
**>> yaffs chunk 227 was not erased
**>> yaffs chunk 228 was not erased
**>> yaffs chunk 229 was not erased
**>> yaffs chunk 230 was not erased
**>> yaffs chunk 231 was not erased
**>> yaffs chunk 232 was not erased
**>> yaffs chunk 233 was not erased
**>> yaffs chunk 234 was not erased
**>> yaffs chunk 235 was not erased
uncorrectable error : <3>uncorrectable error : <4>**>> yaffs chunk 236 was not erased
**>> yaffs chunk 256 was not erased
**>> yaffs chunk 257 was not erased
**>> yaffs chunk 258 was not erased
uncorrectable error : <3>uncorrectable error : <4>**>> yaffs chunk 259 was not erased
uncorrectable error : <3>uncorrectable error : <4>**>> yaffs chunk 288 was not erased
uncorrectable error : <3>uncorrectable error : <4>**>> yaffs chunk 320 was not erased
uncorrectable error : <4>**>> yaffs chunk 352 was not erased
uncorrectable error : <4>**>> yaffs chunk 384 was not erased
**>> yaffs chunk 416 was not erased
**>> yaffs chunk 417 was not erased
**>> yaffs chunk 418 was not erased
**>> yaffs chunk 419 was not erased
**>> yaffs chunk 420 was not erased
**>> yaffs chunk 421 was not erased
**>> yaffs chunk 422 was not erased
**>> yaffs chunk 423 was not erased
**>> yaffs chunk 424 was not erased
**>> yaffs chunk 425 was not erased
**>> yaffs chunk 426 was not erased
**>> yaffs chunk 427 was not erased
**>> yaffs chunk 428 was not erased
**>> yaffs chunk 429 was not erased
**>> yaffs chunk 430 was not erased
**>> yaffs chunk 431 was not erased
**>> yaffs chunk 432 was not erased
**>> yaffs chunk 433 was not erased
**>> yaffs chunk 434 was not erased
**>> yaffs chunk 435 was not erased
**>> yaffs chunk 436 was not erased
**>> yaffs chunk 437 was not erased
**>> yaffs chunk 438 was not erased
**>> yaffs chunk 439 was not erased
**>> yaffs chunk 440 was not erased
**>> yaffs chunk 441 was not erased
**>> yaffs chunk 442 was not erased
**>> yaffs chunk 443 was not erased
**>> yaffs chunk 444 was not erased
**>> yaffs chunk 445 was not erased
**>> yaffs chunk 446 was not erased
**>> yaffs chunk 447 was not erased
**>> yaffs chunk 448 was not erased
**>> yaffs chunk 449 was not erased
**>> yaffs chunk 450 was not erased
**>> yaffs chunk 451 was not erased
**>> yaffs chunk 452 was not erased
**>> yaffs chunk 453 was not erased
**>> yaffs chunk 454 was not erased
**>> yaffs chunk 455 was not erased
**>> yaffs chunk 456 was not erased
**>> yaffs chunk 457 was not erased
**>> yaffs chunk 458 was not erased
**>> yaffs chunk 459 was not erased
**>> yaffs chunk 460 was not erased
**>> yaffs chunk 461 was not erased
**>> yaffs chunk 462 was not erased
**>> yaffs chunk 463 was not erased
**>> yaffs chunk 464 was not erased
**>> yaffs chunk 465 was not erased
**>> yaffs chunk 466 was not erased
**>> yaffs chunk 467 was not erased
**>> yaffs chunk 468 was not erased
**>> yaffs chunk 469 was not erased
**>> yaffs chunk 470 was not erased
**>> yaffs chunk 471 was not erased
**>> yaffs chunk 472 was not erased
**>> yaffs chunk 473 was not erased
**>> yaffs chunk 474 was not erased
**>> yaffs chunk 475 was not erased
**>> yaffs chunk 476 was not erased
**>> yaffs chunk 477 was not erased
**>> yaffs chunk 478 was not erased
**>> yaffs chunk 479 was not erased
**>> yaffs chunk 480 was not erased
**>> yaffs chunk 481 was not erased
**>> yaffs chunk 482 was not erased
**>> yaffs chunk 483 was not erased
**>> yaffs chunk 484 was not erased
**>> yaffs chunk 485 was not erased
**>> yaffs chunk 486 was not erased
**>> yaffs chunk 487 was not erased
**>> yaffs chunk 488 was not erased
**>> yaffs chunk 489 was not erased
**>> yaffs chunk 490 was not erased
**>> yaffs chunk 491 was not erased
**>> yaffs chunk 492 was not erased
**>> yaffs chunk 493 was not erased
**>> yaffs chunk 494 was not erased
**>> yaffs chunk 495 was not erased
**>> yaffs chunk 496 was not erased
**>> yaffs chunk 497 was not erased
**>> yaffs chunk 498 was not erased
**>> yaffs chunk 499 was not erased
**>> yaffs chunk 500 was not erased
**>> yaffs chunk 501 was not erased
**>> yaffs chunk 502 was not erased
**>> yaffs chunk 503 was not erased
**>> yaffs chunk 504 was not erased
**>> yaffs chunk 505 was not erased
**>> yaffs chunk 506 was not erased
uncorrectable error : <4>**>> yaffs chunk 507 was not erased
uncorrectable error : <3>uncorrectable error : <4>**>> yaffs chunk 512 was not erased
**>> yaffs write required 126 attempts
page 32 in gc has no object: 0 0 0
uncorrectable error : <4>page 33 in gc has no object: 0 0 0
page 64 in gc has no object: 0 0 0
uncorrectable error : <4>page 65 in gc has no object: 0 0 0
page 96 in gc has no object: 0 0 0
page 97 in gc has no object: 0 0 0
uncorrectable error : <4>page 98 in gc has no object: 0 0 0
Done
Please press Enter to activate this console. eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
|
|
免费注册
发表于 2012-07-05 17:13
