免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
12345下一页
最近访问板块 发新帖
查看: 13341 | 回复: 43
打印 上一主题 下一主题

[系统管理] 何障怎处理?仍未解决,有图无真相 [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2012-08-06 18:01 |只看该作者 |倒序浏览
本帖最后由 arkue 于 2012-08-08 00:55 编辑



用ilo抓取了故障图如上。出现这些信息时,操作服务器无反应,登录敲入root回车,光标到下一行闪烁,不出现password行,此时可ping通,ssh、http等均无响应。在console按ctrl+alt+del无反应,只能冷启。重启后一切均恢复正常,在不定时间后再次出现同样故障。
更换x86、x64 centos 5.8,问题依旧,怀疑硬件问题,但原系统win2003没有异常……
按网友建议,“禁用ipv6和smartd,关闭iptables和ip6tables,检查下系统时间和硬件时钟”“修改hostname,关闭watchdog,停掉ntp服务”,daemon只保留了network、tomcat、mysql、crond、sshd、syslog,问题依旧……

出现问题重启后日志见下:
syslogd 1.4.1: restart.
kernel: klogd 1.4.1, log source = /proc/kmsg started.
kernel: Linux version 2.6.18-308.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-52)) #1 SMP Tue Feb 21 20:06:06 EST 2012
kernel: Command line: ro root=/dev/VolGroup01/LogVol00
kernel: BIOS-provided physical RAM map:
kernel:  BIOS-e820: 0000000000010000 - 000000000009f400 (usable)
kernel:  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
kernel:  BIOS-e820: 0000000000100000 - 00000000df62f000 (usable)
kernel:  BIOS-e820: 00000000df62f000 - 00000000df63c000 (ACPI data)
kernel:  BIOS-e820: 00000000df63c000 - 00000000df63d000 (usable)
kernel:  BIOS-e820: 00000000df63d000 - 00000000e4000000 (reserved)
kernel:  BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved)
kernel:  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
kernel:  BIOS-e820: 0000000100000000 - 000000021ffff000 (usable)
kernel: DMI 2.7 present.
kernel: SRAT: PXM 0 -> APIC 0 -> Node 0
kernel: SRAT: PXM 0 -> APIC 2 -> Node 0
kernel: SRAT: PXM 0 -> APIC 18 -> Node 0
kernel: SRAT: PXM 0 -> APIC 20 -> Node 0
kernel: SRAT: PXM 1 -> APIC 32 -> Node 1
kernel: SRAT: PXM 1 -> APIC 48 -> Node 1
kernel: SRAT: PXM 1 -> APIC 50 -> Node 1
kernel: SRAT: PXM 1 -> APIC 52 -> Node 1
kernel: SRAT: Node 0 PXM 0 0-e0000000
kernel: SRAT: Node 0 PXM 0 0-120000000
kernel: SRAT: Node 1 PXM 1 120000000-220000000
kernel: Bootmem setup node 0 0000000000000000-0000000120000000
kernel: Bootmem setup node 1 0000000120000000-000000021ffff000
rpc.statd[3379]: Version 1.0.9 Starting
kernel: Memory for crash kernel (0x0 to 0x0) notwithin permissible range
kernel: disabling kdump
kernel: ACPI: PM-Timer IO Port: 0x908
kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
kernel: Processor #0 6:12 APIC version 21
kernel: ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] enabled)
kernel: Processor #32 6:12 APIC version 21
kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
kernel: ACPI: LAPIC (acpi_id[0x18] lapic_id[0x30] enabled)
kernel: Processor #48 6:12 APIC version 21
kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
kernel: ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] disabled)
kernel: ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x14] enabled)
kernel: Processor #20 6:12 APIC version 21
kernel: ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x34] enabled)
kernel: Processor #52 6:12 APIC version 21
kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
kernel: Processor #2 6:12 APIC version 21
kernel: ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] disabled)
kernel: ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled)
kernel: Processor #18 6:12 APIC version 21
kernel: ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x32] enabled)
kernel: Processor #50 6:12 APIC version 21
kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
kernel: ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] disabled)
kernel: ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x16] disabled)
hcid[3458]: Bluetooth HCI daemon
kernel: ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x36] disabled)
kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
hcid[3458]: Register path:/org/bluez fallback:1
sdpd[3462]: Bluetooth SDP daemon
kernel: ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] disabled)
kernel: ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] disabled)
kernel: ACPI: LAPIC (acpi_id[0x19] lapic_id[0x31] disabled)
kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
kernel: ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] disabled)
kernel: ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] disabled)
kernel: ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x35] disabled)
pcscd: pcscdaemon.c:507:main() pcsc-lite 1.4.4 daemon ready.
kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
kernel: ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] disabled)
kernel: ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] disabled)
kernel: ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x33] disabled)
kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
kernel: ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] disabled)
kernel: ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] disabled)
kernel: ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x37] disabled)
pcscd: hotplug_libusb.c:402:HPEstablishUSBNotifications() Driver ifd-egate.bundle does not support IFD_GENERATE_HOTPLUG. Using active polling instead.
kernel: ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
pcscd: hotplug_libusb.c:411:HPEstablishUSBNotifications() Polling forced every 1 second(s)
kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
kernel: IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
kernel: ACPI: IOAPIC (id[0x00] address[0xfec80000] gsi_base[24])
kernel: IOAPIC[1]: apic_id 0, version 32, address 0xfec80000, GSI 24-47
kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
kernel: Setting APIC routing to physical flat
kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
kernel: Using ACPI (MADT) for SMP configuration information
kernel: Nosave address range: 000000000009f000 - 00000000000a0000
kernel: Nosave address range: 00000000000a0000 - 00000000000f0000
kernel: Nosave address range: 00000000000f0000 - 0000000000100000
kernel: Nosave address range: 00000000df62f000 - 00000000df63c000
kernel: Nosave address range: 00000000df63d000 - 00000000e4000000
kernel: Nosave address range: 00000000e4000000 - 00000000fec00000
kernel: Nosave address range: 00000000fec00000 - 00000000fee10000
kernel: Nosave address range: 00000000fee10000 - 00000000ff800000
kernel: Nosave address range: 00000000ff800000 - 0000000100000000
kernel: Allocating PCI resources starting at e6000000 (gap: e4000000:1ac00000)
kernel: SMP: Allowing 32 CPUs, 24 hotplug CPUs
kernel: Built 2 zonelists.  Total pages: 2062554
kernel: Kernel command line: ro root=/dev/VolGroup01/LogVol00
kernel: Initializing CPU#0
kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
kernel: Console: colour VGA+ 80x25
kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
kernel: Checking aperture...
kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
kernel: Placing software IO TLB between 0x1ca1000 - 0x5ca1000
kernel: Memory: 8166968k/8912892k available (2616k kernel code, 211136k reserved, 1671k data, 224k init)
kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4265.56 BogoMIPS (lpj=2132784)
kernel: Security Framework v1.0.0 initialized
kernel: SELinux:  Initializing.
kernel: selinux_register_security:  Registering secondary module capability
kernel: Capability LSM initialized as secondary
kernel: Mount-cache hash table entries: 256
kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
kernel: CPU: L2 cache: 256K
kernel: CPU: L3 cache: 8192K
kernel: CPU 0/0 -> Node 0
kernel: using mwait in idle threads.
kernel: CPU: Physical Processor ID: 0
kernel: CPU: Processor Core ID: 0
kernel: MCE: Machine Check Exception Reporting is disabled.
kernel: SMP alternatives: switching to UP code
kernel: ACPI: Core revision 20060707
kernel: Using local APIC timer interrupts.
kernel: Detected 8.331 MHz APIC timer.
kernel: SMP alternatives: switching to SMP code
kernel: Booting processor 1/8 APIC 0x20
kernel: Initializing CPU#1
kernel: Calibrating delay using timer specific routine.. 4265.48 BogoMIPS (lpj=2132742)
kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
kernel: CPU: L2 cache: 256K
kernel: CPU: L3 cache: 8192K
kernel: CPU 1/20 -> Node 1
kernel: CPU: Physical Processor ID: 1
kernel: CPU: Processor Core ID: 0
kernel: Intel(R) Xeon(R) CPU           E5606  @ 2.13GHz stepping 02
kernel: SMP alternatives: switching to SMP code
kernel: Booting processor 2/8 APIC 0x30
kernel: Initializing CPU#2
kernel: Calibrating delay using timer specific routine.. 4265.49 BogoMIPS (lpj=2132749)
kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
kernel: CPU: L2 cache: 256K
kernel: CPU: L3 cache: 8192K
kernel: CPU 2/30 -> Node 1
kernel: CPU: Physical Processor ID: 1
kernel: CPU: Processor Core ID: 8
kernel: Intel(R) Xeon(R) CPU           E5606  @ 2.13GHz stepping 02
kernel: SMP alternatives: switching to SMP code
kernel: Booting processor 3/8 APIC 0x14
kernel: Initializing CPU#3
kernel: Calibrating delay using timer specific routine.. 4265.47 BogoMIPS (lpj=213273
kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
kernel: CPU: L2 cache: 256K
kernel: CPU: L3 cache: 8192K
kernel: CPU 3/14 -> Node 0
kernel: CPU: Physical Processor ID: 0
kernel: CPU: Processor Core ID: 10
kernel: Intel(R) Xeon(R) CPU           E5606  @ 2.13GHz stepping 02
kernel: SMP alternatives: switching to SMP code
kernel: Booting processor 4/8 APIC 0x34
kernel: Initializing CPU#4
kernel: Calibrating delay using timer specific routine.. 4265.51 BogoMIPS (lpj=2132755)
kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
kernel: CPU: L2 cache: 256K
kernel: CPU: L3 cache: 8192K
kernel: CPU 4/34 -> Node 1
kernel: CPU: Physical Processor ID: 1
kernel: CPU: Processor Core ID: 10
kernel: Intel(R) Xeon(R) CPU           E5606  @ 2.13GHz stepping 02
kernel: SMP alternatives: switching to SMP code
kernel: Booting processor 5/8 APIC 0x2
kernel: Initializing CPU#5
kernel: Calibrating delay using timer specific routine.. 4265.50 BogoMIPS (lpj=2132750)
kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
kernel: CPU: L2 cache: 256K
kernel: CPU: L3 cache: 8192K
kernel: CPU 5/2 -> Node 0
kernel: CPU: Physical Processor ID: 0
kernel: CPU: Processor Core ID: 1
kernel: Intel(R) Xeon(R) CPU           E5606  @ 2.13GHz stepping 02
kernel: SMP alternatives: switching to SMP code
kernel: Booting processor 6/8 APIC 0x12
kernel: Initializing CPU#6
kernel: Calibrating delay using timer specific routine.. 4265.48 BogoMIPS (lpj=2132744)
kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
kernel: CPU: L2 cache: 256K
kernel: CPU: L3 cache: 8192K
kernel: CPU 6/12 -> Node 0
kernel: CPU: Physical Processor ID: 0
kernel: CPU: Processor Core ID: 9
kernel: Intel(R) Xeon(R) CPU           E5606  @ 2.13GHz stepping 02
kernel: SMP alternatives: switching to SMP code
kernel: Booting processor 7/8 APIC 0x32
kernel: Initializing CPU#7
kernel: Calibrating delay using timer specific routine.. 4265.50 BogoMIPS (lpj=2132751)
kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
kernel: CPU: L2 cache: 256K
kernel: CPU: L3 cache: 8192K
kernel: CPU 7/32 -> Node 1
kernel: CPU: Physical Processor ID: 1
kernel: CPU: Processor Core ID: 9
kernel: Intel(R) Xeon(R) CPU           E5606  @ 2.13GHz stepping 02
kernel: Brought up 8 CPUs
kernel: NMI watchdog testing PASSED.
kernel: time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
kernel: time.c: Detected 2132.784 MHz processor.
kernel: migration_cost=9,53
kernel: checking if image is initramfs... it is
kernel: Freeing initrd memory: 3385k freed
kernel: NET: Registered protocol family 16
kernel: ACPI: bus type pci registered
kernel: Warning: pci_mmcfg_init marking 256MB space uncacheable.
kernel: MCFG table requires 64MB uncacheable only. Try booting with acpi_mcfg_max_pci_bus_num=on
kernel: PCI: Using MMCONFIG at e0000000
kernel: ACPI: Interpreter enabled
kernel: ACPI: Using IOAPIC for interrupt routing
kernel: ACPI: No dock devices found.
kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
kernel: PCI: Transparent bridge - 0000:00:1e.0
kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11)
kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11)
kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *7 10 11)
kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 10 11)
kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11)
kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *0, disabled.
kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)
kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
kernel: pnp: PnP ACPI init
kernel: pnp: PnP ACPI: found 11 devices
kernel: usbcore: registered new driver usbfs
kernel: usbcore: registered new driver hub
kernel: PCI: Using ACPI for IRQ routing
kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
kernel: NetLabel: Initializing
kernel: NetLabel:  domain hash size = 128
kernel: NetLabel:  protocols = UNLABELED CIPSOv4
kernel: NetLabel:  unlabeled traffic allowed by default
kernel: hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0
kernel: hpet0: 4 64-bit timers, 14318180 Hz
kernel: DMAR:Host address width 39
kernel: DMARRHD base: 0x000000e7ffe000 flags: 0x1
kernel: IOMMU e7ffe000: ver 1:0 cap c90780106f0462 ecap f0207e
kernel: DMAR:RMRR base: 0x000000df7fc000 end: 0x000000df7fdfff
kernel: DMAR:RMRR base: 0x000000df7f5000 end: 0x000000df7fafff
kernel: DMAR:RMRR base: 0x000000df63e000 end: 0x000000df63ffff

论坛徽章:
0
2 [报告]
发表于 2012-08-06 18:06 |只看该作者
本帖最后由 arkue 于 2012-08-07 17:21 编辑

kernel: DMAR:ATSR flags: 0x0
kernel: PCI-GART: No AMD northbridge found.
kernel: pnp: 00:01: ioport range 0x408-0x40f has been reserved
kernel: pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
kernel: pnp: 00:01: ioport range 0x700-0x71f has been reserved
kernel: pnp: 00:01: iomem range 0xe0000000-0xe3ffffff has been reserved
kernel: pnp: 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
kernel: pnp: 00:01: iomem range 0xe7ffe000-0xe7ffffff has been reserved
kernel: PCI: Bridge: 0000:00:01.0
kernel:   IO window: 4000-4fff
kernel:   MEM window: fbd00000-fbffffff
kernel:   PREFETCH window 0x00000000e6000000-0x00000000e60fffff
kernel: PCI: Bridge: 0000:00:02.0
kernel:   IO window: disabled.
kernel:   MEM window: disabled.
kernel:   PREFETCH window: disabled.
kernel: PCI: Bridge: 0000:00:03.0
kernel:   IO window: disabled.
kernel:   MEM window: disabled.
kernel:   PREFETCH window: disabled.
kernel: PCI: Bridge: 0000:00:04.0
kernel:   IO window: disabled.
kernel:   MEM window: disabled.
kernel:   PREFETCH window: disabled.
kernel: PCI: Bridge: 0000:00:05.0
kernel:   IO window: disabled.
kernel:   MEM window: disabled.
kernel:   PREFETCH window: disabled.
kernel: PCI: Bridge: 0000:00:06.0
kernel:   IO window: disabled.
kernel:   MEM window: disabled.
kernel:   PREFETCH window: disabled.
kernel: PCI: Bridge: 0000:00:07.0
kernel:   IO window: disabled.
kernel:   MEM window: disabled.
kernel:   PREFETCH window: disabled.
kernel: PCI: Bridge: 0000:00:08.0
kernel:   IO window: disabled.
kernel:   MEM window: disabled.
kernel:   PREFETCH window: disabled.
kernel: PCI: Bridge: 0000:00:09.0
kernel:   IO window: disabled.
kernel:   MEM window: disabled.
kernel:   PREFETCH window: disabled.
kernel: PCI: Bridge: 0000:00:0a.0
kernel:   IO window: disabled.
kernel:   MEM window: disabled.
kernel:   PREFETCH window: disabled.
kernel: PCI: Bridge: 0000:00:1c.0
kernel:   IO window: disabled.
kernel:   MEM window: f2000000-f5ffffff
kernel:   PREFETCH window 0x00000000e6100000-0x00000000e61fffff
kernel: PCI: Bridge: 0000:00:1c.2
kernel:   IO window: disabled.
kernel:   MEM window: f6000000-f9ffffff
kernel:   PREFETCH window 0x00000000e6200000-0x00000000e62fffff
kernel: PCI: Bridge: 0000:00:1c.4
kernel:   IO window: 3000-3fff
kernel:   MEM window: f1d00000-f1ffffff
kernel:   PREFETCH window 0x00000000e6300000-0x00000000e63fffff
kernel: PCI: Bridge: 0000:00:1e.0
kernel:   IO window: 2000-2fff
kernel:   MEM window: f1c00000-f1cfffff
kernel:   PREFETCH window 0x00000000e8000000-0x00000000efffffff
kernel: GSI 16 sharing vector 0xA9 and IRQ 16
kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
kernel: ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 16 (level, low) -> IRQ 169
kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
kernel: NET: Registered protocol family 2
kernel: IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
kernel: TCP: Hash tables configured (established 262144 bind 65536)
kernel: TCP reno registered
kernel: audit: initializing netlink socket (disabled)
kernel: type=2000 audit(1344250551.355:1): initialized
kernel: Total HugeTLB memory allocated, 0
kernel: VFS: Disk quotas dquot_6.5.1
kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
kernel: Initializing Cryptographic API
kernel: alg: No test for crc32c (crc32c-generic)
kernel: ksign: Installing public key data
kernel: Loading keyring
kernel: - Added public key 48D0A1FBAE482C4C
kernel: - User ID: CentOS (Kernel Module GPG key)
kernel: io scheduler noop registered
kernel: io scheduler anticipatory registered
kernel: io scheduler deadline registered
kernel: io scheduler cfq registered (default)
kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
kernel: ACPI: CPU0 (power states: C1[C1] C2[C3] C3[C3])
kernel: ACPI: CPU5 (power states: C1[C1] C2[C3] C3[C3])
kernel: ACPI: CPU6 (power states: C1[C1] C2[C3] C3[C3])
kernel: ACPI: CPU3 (power states: C1[C1] C2[C3] C3[C3])
kernel: ACPI: CPU1 (power states: C1[C1] C2[C3] C3[C3])
kernel: ACPI: CPU2 (power states: C1[C1] C2[C3] C3[C3])
kernel: ACPI: CPU7 (power states: C1[C1] C2[C3] C3[C3])
kernel: ACPI: CPU4 (power states: C1[C1] C2[C3] C3[C3])
kernel: ACPI: Thermal Zone [THM0] (8 C)
kernel: Real Time Clock Driver v1.12ac
kernel: Non-volatile memory driver v1.2
kernel: Linux agpgart interface v0.101 (c) Dave Jones
kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
kernel: 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
kernel: brd: module loaded
kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
kernel: ide-floppy driver 0.99.newide
kernel: usbcore: registered new driver hiddev
kernel: usbcore: registered new driver usbhid
kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
kernel: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0eS2M] at 0x60,0x64 irq 1,12
kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
kernel: mice: PS/2 mouse device common for all mice
kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
kernel: md: bitmap version 4.39
kernel: TCP bic registered
kernel: Initializing IPsec netlink socket
kernel: NET: Registered protocol family 1
kernel: NET: Registered protocol family 17
kernel: ACPI: (supports S0 S4 S5)
kernel: Initalizing network drop monitor service
kernel: Freeing unused kernel memory: 224k freed
kernel: Write protecting the kernel read-only data: 530k
kernel: input: AT Translated Set 2 keyboard as /class/input/input0
kernel: GSI 17 sharing vector 0x62 and IRQ 17
kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 98
kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
kernel: ehci_hcd 0000:00:1d.7: debug port 1
kernel: ehci_hcd 0000:00:1d.7: irq 98, io mem 0xf1bf0000
kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
kernel: usb usb1: configuration #1 chosen from 1 choice
kernel: hub 1-0:1.0: USB hub found
kernel: hub 1-0:1.0: 8 ports detected
kernel: USB Universal Host Controller Interface driver v3.0
kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 98
kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
kernel: uhci_hcd 0000:00:1d.0: irq 98, io base 0x00001000
kernel: usb usb2: configuration #1 chosen from 1 choice
kernel: hub 2-0:1.0: USB hub found
kernel: hub 2-0:1.0: 2 ports detected
kernel: GSI 18 sharing vector 0x6A and IRQ 18
kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 23 (level, low) -> IRQ 106
kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
kernel: uhci_hcd 0000:00:1d.1: irq 106, io base 0x00001020
kernel: usb usb3: configuration #1 chosen from 1 choice
kernel: hub 3-0:1.0: USB hub found
kernel: hub 3-0:1.0: 2 ports detected
kernel: GSI 19 sharing vector 0x72 and IRQ 19
kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 114
kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
kernel: uhci_hcd 0000:00:1d.2: irq 114, io base 0x00001040
kernel: usb usb4: configuration #1 chosen from 1 choice
kernel: hub 4-0:1.0: USB hub found
kernel: hub 4-0:1.0: 2 ports detected
kernel: input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 106
kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
kernel: uhci_hcd 0000:00:1d.3: irq 106, io base 0x00001060
kernel: usb usb5: configuration #1 chosen from 1 choice
kernel: hub 5-0:1.0: USB hub found
kernel: hub 5-0:1.0: 2 ports detected
kernel: GSI 20 sharing vector 0x7A and IRQ 20
kernel: ACPI: PCI Interrupt 0000:02:00.4[B] -> GSI 17 (level, low) -> IRQ 122
kernel: uhci_hcd 0000:02:00.4: UHCI Host Controller
kernel: uhci_hcd 0000:02:00.4: new USB bus registered, assigned bus number 6
kernel: uhci_hcd 0000:02:00.4: port count misdetected? forcing to 2 ports
kernel: uhci_hcd 0000:02:00.4: irq 122, io base 0x00003c00
kernel: usb usb6: configuration #1 chosen from 1 choice
kernel: hub 6-0:1.0: USB hub found
kernel: hub 6-0:1.0: 2 ports detected
kernel: SCSI subsystem initialized
kernel: HP CISS Driver (v 3.6.28-RH2)
kernel: GSI 21 sharing vector 0x82 and IRQ 21
kernel: ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 28 (level, low) -> IRQ 130
kernel: cciss 0000:05:00.0: cciss: Trying to put board into performant mode
kernel: cciss 0000:05:00.0: Placing controller into performant mode
kernel:  cciss/c0d0: p1 p2 p3 p4 < p5 >
kernel: scsi0 : cciss
kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
kernel: device-mapper: uevent: version 1.0.3
kernel: device-mapper: ioctl: 4.11.6-ioctl (2011-02-1 initialised: dm-devel@redhat.com
kernel: device-mapper: dm-raid45: initialized v0.2594l
kernel: usb 6-1: new full speed USB device using uhci_hcd and address 2
kernel: usb 6-1: configuration #1 chosen from 1 choice
kernel: input: HP  Virtual Keyboard  as /class/input/input2
kernel: input,hidraw0: USB HID v1.01 Keyboard [HP  Virtual Keyboard ] on usb-0000:02:00.4-1
kernel: input: HP  Virtual Keyboard  as /class/input/input3
kernel: input,hidraw0: USB HID v1.01 Mouse [HP  Virtual Keyboard ] on usb-0000:02:00.4-1
kernel: kjournald starting.  Commit interval 5 seconds
kernel: EXT3-fs: mounted filesystem with ordered data mode.
kernel: SELinux:  Disabled at runtime.
kernel: type=1404 audit(1344250575.106:2): selinux=0 auid=4294967295 ses=4294967295
kernel: input: PC Speaker as /class/input/input4
kernel: bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.11 (July 20, 2011)
kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
kernel: eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f4000000, IRQ 169, node addr e83935268d2a
kernel: ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 122
kernel: eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f2000000, IRQ 122, node addr e83935268d2c
kernel: GSI 22 sharing vector 0xAA and IRQ 22
kernel: ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 170
kernel: eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f8000000, IRQ 170, node addr e83935268d2e
kernel: GSI 23 sharing vector 0xB2 and IRQ 23
kernel: ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 19 (level, low) -> IRQ 178
kernel: eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f6000000, IRQ 178, node addr e83935268d30
kernel: EDAC MC: Ver: 2.0.1 Feb 21 2012
kernel: ACPI: PCI Interrupt 0000:02:00.2[B] -> GSI 17 (level, low) -> IRQ 122
kernel: Floppy drive(s): fd0 is 1.44M
kernel: floppy0: no floppy controllers found
kernel: work still pending
kernel: Floppy drive(s): fd0 is 1.44M
kernel: floppy0: no floppy controllers found
kernel: work still pending
kernel: lp: driver loaded but no devices found
kernel: ACPI: Power Button (FF) [PWRF]
kernel: ACPI: Mapper loaded
kernel: dell-wmi: No known WMI GUID found
kernel: md: Autodetecting RAID arrays.
kernel: md: autorun ...
kernel: md: ... autorun DONE.
kernel: device-mapper: multipath: version 1.0.6 loaded
kernel: EXT3 FS on dm-0, internal journal
kernel: kjournald starting.  Commit interval 5 seconds
kernel: EXT3 FS on cciss/c0d0p3, internal journal
kernel: EXT3-fs: mounted filesystem with ordered data mode.
kernel: Adding 10223608k swap on /dev/VolGroup01/LogVol01.  Priority:-1 extents:1 across:10223608k
kernel: IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
kernel: Loading iSCSI transport class v2.0-871.
kernel: 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
kernel: All bugs added by David S. Miller <davem@redhat.com>
kernel: libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
kernel: libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
kernel: Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
kernel: iscsi: registered transport (cxgb3i)
kernel: IPv6: Loaded, but administratively disabled, reboot required to enable
kernel: cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July 20, 2011)
kernel: bnx2 0000:03:00.0: eth0: Added CNIC device
kernel: bnx2 0000:03:00.1: eth1: Added CNIC device
kernel: bnx2 0000:04:00.0: eth2: Added CNIC device
kernel: bnx2 0000:04:00.1: eth3: Added CNIC device
kernel: Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.0.3 (Aug 04, 2011)
kernel: iscsi: registered transport (bnx2i)
kernel: scsi1 : Broadcom Offload iSCSI Initiator
kernel: scsi2 : Broadcom Offload iSCSI Initiator
kernel: scsi3 : Broadcom Offload iSCSI Initiator
kernel: scsi4 : Broadcom Offload iSCSI Initiator
kernel: iscsi: registered transport (tcp)
kernel: iscsi: registered transport (iser)
kernel: iscsi: registered transport (be2iscsi)
kernel: bnx2 0000:03:00.0: eth0: using MSIX
kernel: bnx2i [03:00.00]: ISCSI_INIT passed
kernel: bnx2 0000:03:00.0: eth0: NIC Copper Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
kernel: Bluetooth: Core ver 2.10
kernel: NET: Registered protocol family 31
kernel: Bluetooth: HCI device and connection manager initialized
kernel: Bluetooth: HCI socket layer initialized
kernel: Bluetooth: L2CAP ver 2.8
kernel: Bluetooth: L2CAP socket layer initialized
kernel: Bluetooth: RFCOMM socket layer initialized
kernel: Bluetooth: RFCOMM TTY layer initialized
kernel: Bluetooth: RFCOMM ver 1.8
kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.1
hidd[3636]: Bluetooth HID daemon
automount[3680]: lookup_read_master: lookup(nisplus): couldn't locate nis+ table auto.master
gpm[3863]: *** info [startup.c(95)]:
gpm[3863]: Started gpm successfully. Entered daemon mode.
avahi-daemon[3954]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
avahi-daemon[3954]: Successfully dropped root privileges.
avahi-daemon[3954]: avahi-daemon 0.6.16 starting up.
avahi-daemon[3954]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
avahi-daemon[3954]: Successfully called chroot().
avahi-daemon[3954]: Successfully dropped remaining capabilities.
avahi-daemon[3954]: No service found in /etc/avahi/services.
avahi-daemon[3954]: socket() failed: Address family not supported by protocol
avahi-daemon[3954]: Failed to create IPv6 socket, proceeding in IPv4 only mode
avahi-daemon[3954]: socket() failed: Address family not supported by protocol
avahi-daemon[3954]: New relevant interface eth0.IPv4 for mDNS.
avahi-daemon[3954]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.88.3.
avahi-daemon[3954]: Network interface enumeration completed.
avahi-daemon[3954]: Registering new address record for 192.168.88.3 on eth0.
avahi-daemon[3954]: Registering HINFO record with values 'X86_64'/'LINUX'.
avahi-daemon[3954]: Host name conflict, retrying with <localhost-2>
avahi-daemon[3954]: Registering new address record for 192.168.88.3 on eth0.
avahi-daemon[3954]: Registering HINFO record with values 'X86_64'/'LINUX'.
avahi-daemon[3954]: Server startup complete. Host name is localhost-2.local. Local service cookie is 1966115516.
smartd[3995]: smartd version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
smartd[3995]: Home page is http://smartmontools.sourceforge.net/  
smartd[3995]: Opened configuration file /etc/smartd.conf
smartd[3995]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
smartd[3995]: Problem creating device name scan list
smartd[3995]: Problem creating device name scan list
smartd[3995]: In the system's table of devices NO devices found to scan
smartd[3995]: Monitoring 0 ATA and 0 SCSI devices
smartd[3997]: smartd has fork()ed into background mode. New PID=3997.
kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
smartd[3997]: System clock time adjusted to the past. Resetting next wakeup time.

论坛徽章:
0
3 [报告]
发表于 2012-08-06 21:14 |只看该作者
回复 1# arkue

这更像是debug's info,如果可以的话,2字-忽略!如果想解决这个问题,建议提供更多有价值的信息!
   

论坛徽章:
0
4 [报告]
发表于 2012-08-06 23:03 |只看该作者
补充了些信息在原帖里 回复 3# zjhxmjl


   

论坛徽章:
0
5 [报告]
发表于 2012-08-07 10:45 |只看该作者
还 未 解 决

论坛徽章:
15
CU大牛徽章
日期:2013-03-13 15:32:35白羊座
日期:2013-10-30 13:11:16未羊
日期:2013-11-29 10:47:02白羊座
日期:2014-01-22 11:34:25白羊座
日期:2014-03-04 11:05:50申猴
日期:2014-07-29 16:31:36天秤座
日期:2013-10-23 15:33:47未羊
日期:2013-10-09 09:18:53CU大牛徽章
日期:2013-03-13 15:38:15CU大牛徽章
日期:2013-03-13 15:38:52CU大牛徽章
日期:2013-03-14 14:08:55未羊
日期:2013-09-23 09:29:22
6 [报告]
发表于 2012-08-07 10:53 |只看该作者
应该为驱动模块的问题,把出问题时/var/log/messsages最后20条记录帖上来

论坛徽章:
0
7 [报告]
发表于 2012-08-07 11:03 |只看该作者
本帖最后由 arkue 于 2012-08-07 17:18 编辑

略去,见一楼

论坛徽章:
0
8 [报告]
发表于 2012-08-07 11:04 |只看该作者
本帖最后由 arkue 于 2012-08-07 17:18 编辑

略去,见一楼

论坛徽章:
0
9 [报告]
发表于 2012-08-07 11:05 |只看该作者
木有了 木有了

论坛徽章:
15
CU大牛徽章
日期:2013-03-13 15:32:35白羊座
日期:2013-10-30 13:11:16未羊
日期:2013-11-29 10:47:02白羊座
日期:2014-01-22 11:34:25白羊座
日期:2014-03-04 11:05:50申猴
日期:2014-07-29 16:31:36天秤座
日期:2013-10-23 15:33:47未羊
日期:2013-10-09 09:18:53CU大牛徽章
日期:2013-03-13 15:38:15CU大牛徽章
日期:2013-03-13 15:38:52CU大牛徽章
日期:2013-03-14 14:08:55未羊
日期:2013-09-23 09:29:22
10 [报告]
发表于 2012-08-07 11:08 |只看该作者
回复 9# arkue

这个是出问题时候的日志?
   
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP