bind 启动了，这个文件正常吗？

jszj

Aug 12 09:52:29 mike named[9313]: starting BIND 9.6-ESV-R7-P2
Aug 12 09:52:29 mike named[9313]: built with '--prefix=/usr/local/named' '--enable-threads'
Aug 12 09:52:29 mike named[9313]: ----------------------------------------------------
Aug 12 09:52:29 mike named[9313]: BIND 9 is maintained by Internet Systems Consortium,
Aug 12 09:52:29 mike named[9313]: Inc. (ISC), a non-profit 501(c)(3) public-benefit
Aug 12 09:52:29 mike named[9313]: corporation.  Support and training for BIND 9 are
Aug 12 09:52:29 mike named[9313]: available at https://www.isc.org/support
Aug 12 09:52:29 mike named[9313]: ----------------------------------------------------
Aug 12 09:52:29 mike named[9313]: adjusted limit on open files from 4096 to 1048576
Aug 12 09:52:29 mike named[9313]: found 2 CPUs, using 2 worker threads
Aug 12 09:52:29 mike named[9313]: using up to 4096 sockets
Aug 12 09:52:29 mike named[9313]: loading configuration from '/usr/local/named/etc/named.conf'
Aug 12 09:52:29 mike named[9313]: using default UDP/IPv4 port range: [1024, 65535]
Aug 12 09:52:29 mike named[9313]: using default UDP/IPv6 port range: [1024, 65535]
Aug 12 09:52:29 mike named[9313]: listening on IPv4 interface lo, 127.0.0.1#53
Aug 12 09:52:29 mike named[9313]: listening on IPv4 interface ppp0, 180.117.175.34#53
Aug 12 09:52:29 mike named[9313]: sizing zone task pool based on 5 zones
Aug 12 09:52:29 mike named[9313]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
Aug 12 09:52:29 mike named[9313]: automatic empty zone: 0.IN-ADDR.ARPA
Aug 12 09:52:29 mike named[9313]: automatic empty zone: 127.IN-ADDR.ARPA
Aug 12 09:52:29 mike named[9313]: automatic empty zone: 254.169.IN-ADDR.ARPA
Aug 12 09:52:29 mike named[9313]: automatic empty zone: 2.0.192.IN-ADDR.ARPA
Aug 12 09:52:29 mike named[9313]: automatic empty zone: 100.51.198.IN-ADDR.ARPA
Aug 12 09:52:29 mike named[9313]: automatic empty zone: 113.0.203.IN-ADDR.ARPA
Aug 12 09:52:29 mike named[9313]: automatic empty zone: 255.255.255.255.IN-ADDR.ARPA
Aug 12 09:52:29 mike named[9313]: automatic empty zone: 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA
Aug 12 09:52:29 mike named[9313]: automatic empty zone: 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA
Aug 12 09:52:29 mike named[9313]: automatic empty zone: D.F.IP6.ARPA
Aug 12 09:52:29 mike named[9313]: automatic empty zone: 8.E.F.IP6.ARPA
Aug 12 09:52:29 mike named[9313]: automatic empty zone: 9.E.F.IP6.ARPA
Aug 12 09:52:29 mike named[9313]: automatic empty zone: A.E.F.IP6.ARPA
Aug 12 09:52:29 mike named[9313]: automatic empty zone: B.E.F.IP6.ARPA
Aug 12 09:52:29 mike named[9313]: automatic empty zone: 8.B.D.0.1.0.0.2.IP6.ARPA
Aug 12 09:52:29 mike named[9313]: command channel listening on 127.0.0.1#953
Aug 12 09:52:29 mike named[9313]: zone 0.0.127.in-addr.arpa/IN: loaded serial 20120811
Aug 12 09:52:29 mike named[9313]: zone 1.168.192.in-addr.arpa/IN: loaded serial 20120811
Aug 12 09:52:29 mike named[9313]: zone test.com/IN: loaded serial 20120811
Aug 12 09:52:29 mike named[9313]: zone localhost/IN: loaded serial 20120811
Aug 12 09:52:29 mike named[9313]: zone test.com/IN: sending notifies (serial 20120811)
Aug 12 09:52:29 mike named[9313]: zone 1.168.192.in-addr.arpa/IN: sending notifies (serial 20120811)
Aug 12 09:52:29 mike named[9313]: running

jszj

没有人回答！

llzqq

启动时没发现问题基本上可以确认NAMED.CONF配置问题不大。

kingjo47

没有问题 bind 没有配置好反向解析域只要有文件存在 bind是可以自己写入的 只是一个Warning

jszj

谢谢大家热心帮助