SUN存储电池过期，更换问题！

充满光的瞳孔

SUN STK6540 电池报警，电池电量已耗尽，未更换之前看到已使用时间1203小时，状况：启用  状态：错误  ；更换新电池之后，还是已使用1203个小时，提示过期，状态：错误，不过机器里边看到电池的SN号（机器里唯一标示）已经是新电池的SN号，奇了个怪了...

手里一个更换电池的文档，分享给大家，顺便大家帮忙看看文档里有没有遗漏和错误，还需要注意什么。 SunSTK6540更换电池.pdf (269.95 KB, 下载次数: 464)

2012-09-27 18:57 上传

点击文件名下载附件
存储更换电池

DC_楚楚

介个还真不熟，@东方蜘蛛 求救蜘蛛大神呗{:3_189:}

hzg1103

按照CAM中《服务顾问》的步骤操作：
重置电池的使用寿命

充满光的瞳孔

重置电池寿命会报错，error：password  

充满光的瞳孔

怎么能请出蜘蛛大神，怎么求助呀...{:3_185:} 回复 2# DC_楚楚


   

doging

充满光的瞳孔 发表于 2012-09-28 09:35
重置电池寿命会报错，error：password

默认密码被改了？

充满光的瞳孔

您是指哪里的密码？我是用CAM登陆的，只输入了本机的密码回复 6# doging


   

充满光的瞳孔

如果是密码被改了的情况，怎么解决回复 6# doging


   

doging

Local Array password

This password controls the ability of the Management Host to alter the configuration of the Sun Storage[TM] RAID Arrays. By default from the factory it is blank (no password). The password is stored in two locations. One copy is stored on the array itself, in it's configuration region (DACstore). The other is stored encrypted on the Management Host, either in :

/var/opt/SUNWsefms/store/Devices/devicesX

when Common Array Management (CAM) software is used

or in :

/opt/SUNWstade/DATA/rasagent.conf

when the older Configuration Services management software is used

Note: Upgrade to CAM is highly recommended for any management hosts still using Configuration Services

Each Array and installed Management Host must agree on this password in order for the Management Host to be able to make configuration changes on the Array.

Changing the Local Array password can be done via the "Manage Passwords..." button on the "Administration" page for the array in the CAM GUI, or using "sscs modify" command in the CAM CLI. This has two options :

    "Change Array Password" which updates both the DACStore of the array and the CAM software configuration file with a new password. In order to use this option the current password must be entered first.
    "Update Array Password in Array Registration Database" which updates only the CAM software configuration file with a new password, for use then the software is out of sync with the array password.
    Note: Document 1011201.1 references how to use this option to reset the array password.

If the old Configuration Services management software is used, you must also update it on the StorADE side as well. Failure to do so will prevent collection of the 6130SupportData script. It can be set by selecting: StorADE -> Inventory -> the Array in question -> "Update Monitoring and Setup Information" from the Actions pulldown menu.


清楚办法，是串口登录6140，选3 Reset Storage Array (SYMbol) Password




Service Interface Main Menu

==============================

1) Display IP Configuration

2) Change IP Configuration

3) Reset Storage Array (SYMbol) Password

Q) Quit Menu

Enter Selection:

充满光的瞳孔

这就去试试奏效否，想不明白重置电池寿命怎么就跟密码联系上了回复 9# doging