编译内核时的问题

lpp540

   我在一个编译好的能够启动的内核里面copy一个.config文件到一个新的内核(3.0.43)中，然后再make zImage(旧内核是3.0.1的)就出现下面的错误，望高手解答，谢谢！

no rule to make target 'firmware/sd8686_helper.bin', needed by 'firmware/sd8686_helper.bin.gen.o'. s

瀚海书香

回复 1# lpp540
make clean运行了吗？
另外，看看是不是这两个版本对这个firmware的config的描述不同了啊
   

lpp540

运行了make clean 还是一样的效果

lpp540

重新设置后再编译又变成这样了
Starting kernel ...


Uncompressing Linux... done, booting the kernel.
Linux version 3.0.43 (root@lpp-virtual-machine) (gcc version 4.2.2) #8 Wed Oct 10 15:46:14 HKT 2012
S3C24XX Clocks, Copyright 2004 Simtec Electronics
camera: no parent clock specified
S3C64XX: PLL settings, A=532000000, M=532000000, E=24000000
S3C64XX: HCLK2=266000000, HCLK=133000000, PCLK=66500000
mout_apll: source is fout_apll (1), rate is 532000000
mout_epll: source is epll (1), rate is 24000000
mout_mpll: source is mpll (1), rate is 532000000
mmc_bus: source is mout_epll (0), rate is 24000000
mmc_bus: source is mout_epll (0), rate is 24000000
mmc_bus: source is mout_epll (0), rate is 24000000
usb-bus-host: source is clk_48m (0), rate is 48000000
uclk1: source is dout_mpll (1), rate is 66500000
spi-bus: source is mout_epll (0), rate is 24000000
spi-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
irda-bus: source is mout_epll (0), rate is 24000000
camera: no parent clock specified
Kernel command line: root=/dev/mtdblock2 rootfstype=yaffs2 console=ttySAC0,115200
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256MB = 256MB total
Memory: 252304k/252304k available, 9840k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xff600000 - 0xffe00000   (   8 MB)
    vmalloc : 0xd0800000 - 0xf6000000   ( 600 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .init : 0xc0008000 - 0xc0032000   ( 168 kB)
      .text : 0xc0032000 - 0xc06a8020   (6617 kB)
      .data : 0xc06aa000 - 0xc06e5f90   ( 240 kB)
       .bss : 0xc06e5fb4 - 0xc075a6b4   ( 466 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:246 nr_irqs:246 246
VIC @f6000000: id 0x00041192, vendor 0x41
VIC @f6010000: id 0x00041192, vendor 0x41
Console: colour dummy device 80x30
console [ttySAC0] enabled
Calibrating delay loop... 528.79 BogoMIPS (lpj=264396
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
hw perfevents: enabled with v6 PMU driver, 3 counters available
devtmpfs: initialized
NET: Registered protocol family 16
hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
s3c64xx_dma_init: Registering DMA channels
PL080: IRQ 73, at d0804000, channels 0..8
PL080: IRQ 74, at d0806000, channels 8..16
s3c-adc s3c64xx-adc: attached adc driver
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
s3c-i2c s3c2440-i2c.0: slave address 0x10
s3c-i2c s3c2440-i2c.0: bus frequency set to 64 KHz
s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
s3c-i2c s3c2440-i2c.1: slave address 0x10
s3c-i2c s3c2440-i2c.1: bus frequency set to 64 KHz
s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
Advanced Linux Sound Architecture Driver Version 1.0.24.
cfg80211: Calling CRDA to update world regulatory domain
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
audit: initializing netlink socket (disabled)
type=2000 audit(0.280:1): initialized
msgmni has been set to 492
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
s3c6400-uart.0: ttySAC0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10
s3c6400-uart.1: ttySAC1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10
s3c6400-uart.2: ttySAC2 at MMIO 0x7f005800 (irq = 24) is a S3C6400/10
s3c6400-uart.3: ttySAC3 at MMIO 0x7f005c00 (irq = 2 is a S3C6400/10
vcan: Virtual CAN interface driver
slcan: serial line CAN interface driver
slcan: 10 dynamic interface channels.
CAN device driver interface
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
dm9000 Ethernet Driver, V1.31
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
usbcore: registered new interface driver rt73usb
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000
s3c2410-ohci s3c2410-ohci: init err (00000000 0000)
ohci_hcd: can't start s3c24xx
s3c2410-ohci s3c2410-ohci: startup error -75
s3c2410-ohci s3c2410-ohci: USB bus 1 deregistered
s3c2410-ohci: probe of s3c2410-ohci failed with error -75
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
dummy_hcd dummy_hcd: USB Host+Gadget Emulator, driver 02 May 2005
dummy_hcd dummy_hcd: Dummy host controller
dummy_hcd dummy_hcd: new USB bus registered, assigned bus number 1
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Dummy host controller
usb usb1: Manufacturer: Linux 3.0.43 dummy_hcd
usb usb1: SerialNumber: dummy_hcd
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
mousedev: PS/2 mouse device common for all mice
input: samsung-keypad as /devices/platform/samsung-keypad/input/input0
s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
i2c /dev entries driver
Linux video capture interface: v2.00
gspca: v2.13.0 registered
usbcore: registered new interface driver benq
usbcore: registered new interface driver conex
usbcore: registered new interface driver cpia1
usbcore: registered new interface driver etoms
usbcore: registered new interface driver finepix
usbcore: registered new interface driver jeilinj
usbcore: registered new interface driver mars
usbcore: registered new interface driver mr97310a
usbcore: registered new interface driver ov519
usbcore: registered new interface driver ov534
usbcore: registered new interface driver ov534_9
usbcore: registered new interface driver pac207
usbcore: registered new interface driver pac7302
usbcore: registered new interface driver pac7311
usbcore: registered new interface driver sn9c2028
usbcore: registered new interface driver sn9c20x
usbcore: registered new interface driver sonixb
usbcore: registered new interface driver sonixj
usbcore: registered new interface driver spca500
usbcore: registered new interface driver spca501
usbcore: registered new interface driver spca505
usbcore: registered new interface driver spca506
usbcore: registered new interface driver spca508
usbcore: registered new interface driver spca561
usbcore: registered new interface driver spca1528
usbcore: registered new interface driver sq905
usbcore: registered new interface driver sq905c
usbcore: registered new interface driver sq930x
usbcore: registered new interface driver sunplus
usbcore: registered new interface driver stk014
usbcore: registered new interface driver stv0680
usbcore: registered new interface driver t613
usbcore: registered new interface driver tv8532
usbcore: registered new interface driver vc032x
usbcore: registered new interface driver zc3xx
usbcore: registered new interface driver ALi m5602
usbcore: registered new interface driver STV06xx
usbcore: registered new interface driver gspca_gl860
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.1.0)
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 2: mmc_bus (24000000 Hz)
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ALSA device list:
  No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
can: controller area network core (rev 20090105 abi
NET: Registered protocol family 29
can: raw protocol (rev 20090105)
can: broadcast manager protocol (rev 20090105 t)
lib80211: common routines for IEEE802.11 drivers
Registering the dns_resolver key type
s3c-rtc s3c64xx-rtc: setting system clock to 2012-10-10 15:56:13 UTC (1349884573)
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[<c0038d3c>] (unwind_backtrace+0x0/0xf from [<c0036b70>] (dump_stack+0x18/0x1c)
[<c0036b70>] (dump_stack+0x18/0x1c) from [<c004e150>] (panic+0x64/0x1c4)
[<c004e150>] (panic+0x64/0x1c4) from [<c0008ed4>] (mount_block_root+0x120/0x25
[<c0008ed4>] (mount_block_root+0x120/0x25 from [<c000906c>] (mount_root+0x60/0x10c)
[<c000906c>] (mount_root+0x60/0x10c) from [<c0009264>] (prepare_namespace+0x14c/0x1ac)
[<c0009264>] (prepare_namespace+0x14c/0x1ac) from [<c000881c>] (kernel_init+0xf8/0x140)
[<c000881c>] (kernel_init+0xf8/0x140) from [<c00339d4>] (kernel_thread_exit+0x0/0x

hk2305621

s3c-rtc s3c64xx-rtc: setting system clock to 2012-10-10 15:56:13 UTC (1349884573)
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

编译的时候, config 没有指定根文件系统？

lpp540

能说下  config 怎么指定根文件系统吗？谢谢！

embeddedlwp

妹子长得不错啊

lpp540

谢谢！我的问题还没解决，呵呵

lpp540

试了N种方法，肿么就是不见效呢！

lpp540

又出新问题了。
Uncompressing Linux... done, booting the kernel.
Linux version 3.0.43 (root@lpp-virtual-machine) (gcc version 4.2.2) #12 Fri Oct 12 17:06:52 HKT 2012
BUG: mapping for 0x7e00f000 at 0xf4100000 overlaps vmalloc space
BUG: mapping for 0x70000000 at 0xf4200000 overlaps vmalloc space
BUG: mapping for 0x7f005000 at 0xf5005000 overlaps vmalloc space
BUG: mapping for 0x71200000 at 0xf4000000 overlaps vmalloc space
BUG: mapping for 0x71300000 at 0xf4010000 overlaps vmalloc space
BUG: mapping for 0x7f006000 at 0xf4300000 overlaps vmalloc space
BUG: mapping for 0x7f008000 at 0xf4500000 overlaps vmalloc space
BUG: mapping for 0x74108000 at 0xf4600000 overlaps vmalloc space
BUG: mapping for 0x7e004000 at 0xf4400000 overlaps vmalloc space
BUG: mapping for 0x7c100000 at 0xf4700000 overlaps vmalloc space
S3C24XX Clocks, Copyright 2004 Simtec Electronics
camera: no parent clock specified
S3C64XX: PLL settings, A=532000000, M=532000000, E=24000000
S3C64XX: HCLK2=266000000, HCLK=133000000, PCLK=66500000
mout_apll: source is fout_apll (1), rate is 532000000
mout_epll: source is epll (1), rate is 24000000
mout_mpll: source is mpll (1), rate is 532000000
mmc_bus: source is mout_epll (0), rate is 24000000
mmc_bus: source is mout_epll (0), rate is 24000000
mmc_bus: source is mout_epll (0), rate is 24000000
usb-bus-host: source is clk_48m (0), rate is 48000000
uclk1: source is dout_mpll (1), rate is 66500000
spi-bus: source is mout_epll (0), rate is 24000000
spi-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
audio-bus: source is mout_epll (0), rate is 24000000
irda-bus: source is mout_epll (0), rate is 24000000
camera: no parent clock specified
Kernel command line: root=/dev/mtdblock2 rootfstype=yaffs2 console=ttySAC0,115200
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256MB = 256MB total
Memory: 252184k/252184k available, 9960k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xff600000 - 0xffe00000   (   8 MB)
    vmalloc : 0xd0800000 - 0xf6000000   ( 600 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .init : 0xc0008000 - 0xc0033000   ( 172 kB)
      .text : 0xc0033000 - 0xc06c5678   (6730 kB)
      .data : 0xc06c6000 - 0xc0702890   ( 243 kB)
       .bss : 0xc07028b4 - 0xc0778c14   ( 473 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:246 nr_irqs:246 246
VIC @f4000000: id 0x00041192, vendor 0x41
VIC @f4010000: id 0x00041192, vendor 0x41
Console: colour dummy device 80x30
console [ttySAC0] enabled
Calibrating delay loop... 528.79 BogoMIPS (lpj=264396
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
hw perfevents: enabled with v6 PMU driver, 3 counters available
devtmpfs: initialized
NET: Registered protocol family 16
hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
s3c64xx_dma_init: Registering DMA channels
PL080: IRQ 73, at d0804000, channels 0..8
PL080: IRQ 74, at d0806000, channels 8..16
s3c-adc s3c64xx-adc: attached adc driver
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
s3c-i2c s3c2440-i2c.0: slave address 0x10
s3c-i2c s3c2440-i2c.0: bus frequency set to 64 KHz
s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
s3c-i2c s3c2440-i2c.1: slave address 0x10
s3c-i2c s3c2440-i2c.1: bus frequency set to 64 KHz
s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
Advanced Linux Sound Architecture Driver Version 1.0.24.
cfg80211: Calling CRDA to update world regulatory domain
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
audit: initializing netlink socket (disabled)
type=2000 audit(0.280:1): initialized
msgmni has been set to 492
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Unable to handle kernel paging request at virtual address f5100130
pgd = c0004000
[f5100130] *pgd=5fffb841, *pte=00000000, *ppte=00000000
Internal error: Oops: 827 [#1]
Modules linked in:
CPU: 0    Not tainted  (3.0.43 #12)
PC is at s3cfb_pre_init+0x30/0x40
LR is at s3cfb_probe+0xe8/0x7d4
pc : [<c0205768>]    lr : [<c001e82c>]    psr: a0000013
sp : cf833e10  ip : cf833e20  fp : cf833e1c
r10: 00000000  r9 : 00000000  r8 : 00000000
r7 : c06cff60  r6 : 00004000  r5 : c06d0020  r4 : cf821250
r3 : f5100000  r2 : c06e4af4  r1 : 00009021  r0 : 00000000
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 00c5387d  Table: 50004008  DAC: 00000017
Process swapper (pid: 1, stack limit = 0xcf83226
Stack: (0xcf833e10 to 0xcf834000)
3e00:                                     cf833e7c cf833e20 c001e82c c0205744
3e20: 00000000 cf91f8d0 cf821000 cf91f8d0 c06cff68 00000000 c06cff68 00000000
3e40: c06cff70 3373c068 00626663 cf821250 cf833e6c c06cff68 c076d5d8 c06e4a88
3e60: c022c068 cf922060 00000000 00000000 cf833e8c cf833e80 c022d1c4 c001e750
3e80: cf833eb4 cf833e90 c022be00 c022d1b0 cf8578c0 cf833ea0 c06cff68 c06cff9c
3ea0: c06e4a88 c022c068 cf833ed4 cf833eb8 c022c0f8 c022bcb0 cf833ed4 00000000
3ec0: cf833ed8 c06e4a88 cf833efc cf833ed8 c022af34 c022c074 cf80d4b8 cf8529f0
3ee0: c05db434 c002cecc c06e4a88 c06e8db0 cf833f0c cf833f00 c022bb24 c022aee4
3f00: cf833f3c cf833f10 c022b808 c022bb10 c05db434 cf833f20 c002d1e8 c002cecc
3f20: c06e4a88 00000013 c0480480 cf832000 cf833f64 cf833f40 c022c414 c022b748
3f40: c076a7c8 c002d1e8 c002cecc c002d45c 00000013 c0480480 cf833f74 cf833f68
3f60: c022d430 c022c3bc cf833f84 cf833f78 c0480494 c022d3f0 cf833fd4 cf833f88
3f80: c00334b0 c048048c 000000f6 c06d4a70 cf833fac cf833fa0 c01de3e0 00000000
3fa0: cf833fbc cf833fb0 c008a4c4 c002d1e8 c002cecc c002d45c 00000013 00000000
3fc0: 00000000 00000000 cf833ff4 cf833fd8 c00087b8 c0033398 00000000 00000000
3fe0: c0008724 c00349d4 00000000 cf833ff8 c00349d4 c0008730 ffffffff ffffffff
[<c0205768>] (s3cfb_pre_init+0x30/0x40) from [<c001e82c>] (s3cfb_probe+0xe8/0x7d4)
[<c001e82c>] (s3cfb_probe+0xe8/0x7d4) from [<c022d1c4>] (platform_drv_probe+0x20/0x24)
[<c022d1c4>] (platform_drv_probe+0x20/0x24) from [<c022be00>] (driver_probe_device+0x15c/0x21
[<c022be00>] (driver_probe_device+0x15c/0x21 from [<c022c0f8>] (__driver_attach+0x90/0x94)
[<c022c0f8>] (__driver_attach+0x90/0x94) from [<c022af34>] (bus_for_each_dev+0x5c/0x8
[<c022af34>] (bus_for_each_dev+0x5c/0x8 from [<c022bb24>] (driver_attach+0x20/0x2
[<c022bb24>] (driver_attach+0x20/0x2 from [<c022b808>] (bus_add_driver+0xcc/0x26
[<c022b808>] (bus_add_driver+0xcc/0x26 from [<c022c414>] (driver_register+0x64/0x148)
[<c022c414>] (driver_register+0x64/0x148) from [<c022d430>] (platform_driver_register+0x4c/0x60)
[<c022d430>] (platform_driver_register+0x4c/0x60) from [<c0480494>] (s3cfb_init+0x14/0x1c)
[<c0480494>] (s3cfb_init+0x14/0x1c) from [<c00334b0>] (do_one_initcall+0x124/0x178)
[<c00334b0>] (do_one_initcall+0x124/0x178) from [<c00087b8>] (kernel_init+0x94/0x140)
[<c00087b8>] (kernel_init+0x94/0x140) from [<c00349d4>] (kernel_thread_exit+0x0/0x8)
Code: e5823214 ee070f9a e59f300c e5921214 (e5831130)
---[ end trace a8636487c30c3176 ]---
Kernel panic - not syncing: Attempted to kill init!
[<c0039d3c>] (unwind_backtrace+0x0/0xf8) from [<c0037b70>] (dump_stack+0x18/0x1c)
[<c0037b70>] (dump_stack+0x18/0x1c) from [<c004f240>] (panic+0x64/0x1c4)
[<c004f240>] (panic+0x64/0x1c4) from [<c0052e14>] (do_exit+0x6d8/0x70c)
[<c0052e14>] (do_exit+0x6d8/0x70c) from [<c0037a70>] (die+0x1a8/0x1d0)
[<c0037a70>] (die+0x1a8/0x1d0) from [<c003d58c>] (__do_kernel_fault+0x70/0x90)
[<c003d58c>] (__do_kernel_fault+0x70/0x90) from [<c048799c>] (do_page_fault+0x90/0x340)
[<c048799c>] (do_page_fault+0x90/0x340) from [<c00332f8>] (do_DataAbort+0x40/0xa4)
[<c00332f8>] (do_DataAbort+0x40/0xa4) from [<c048578c>] (__dabt_svc+0x4c/0x80)
Exception stack(0xcf833dc8 to 0xcf833e10)
3dc0:                   00000000 00009021 c06e4af4 f5100000 cf821250 c06d0020
3de0: 00004000 c06cff60 00000000 00000000 00000000 cf833e1c cf833e20 cf833e10
3e00: c001e82c c0205768 a0000013 ffffffff
[<c048578c>] (__dabt_svc+0x4c/0x80) from [<c0205768>] (s3cfb_pre_init+0x30/0x40)
[<c0205768>] (s3cfb_pre_init+0x30/0x40) from [<c001e82c>] (s3cfb_probe+0xe8/0x7d4)
[<c001e82c>] (s3cfb_probe+0xe8/0x7d4) from [<c022d1c4>] (platform_drv_probe+0x20/0x24)
[<c022d1c4>] (platform_drv_probe+0x20/0x24) from [<c022be00>] (driver_probe_device+0x15c/0x218)
[<c022be00>] (driver_probe_device+0x15c/0x218) from [<c022c0f8>] (__driver_attach+0x90/0x94)
[<c022c0f8>] (__driver_attach+0x90/0x94) from [<c022af34>] (bus_for_each_dev+0x5c/0x88)
[<c022af34>] (bus_for_each_dev+0x5c/0x88) from [<c022bb24>] (driver_attach+0x20/0x28)
[<c022bb24>] (driver_attach+0x20/0x28) from [<c022b808>] (bus_add_driver+0xcc/0x268)
[<c022b808>] (bus_add_driver+0xcc/0x268) from [<c022c414>] (driver_register+0x64/0x148)
[<c022c414>] (driver_register+0x64/0x148) from [<c022d430>] (platform_driver_register+0x4c/0x60)
[<c022d430>] (platform_driver_register+0x4c/0x60) from [<c0480494>] (s3cfb_init+0x14/0x1c)
[<c0480494>] (s3cfb_init+0x14/0x1c) from [<c00334b0>] (do_one_initcall+0x124/0x178)
[<c00334b0>] (do_one_initcall+0x124/0x178) from [<c00087b8>] (kernel_init+0x94/0x140)
[<c00087b8>] (kernel_init+0x94/0x140) from [<c00349d4>] (kernel_thread_exit+0x0/0x8)