LINUX意外重启

Eric_Guan

此linux用了5年了，一直没出现问题。
9月30日、10月11日出现两次意外重启，请大神帮忙看一下。

kernel69

Oct 11 20:16:13 s03 init: Id "h1" respawning too fast: disabled for 5 minutes
Oct 11 20:17:05 s03 init: Id "h3" respawning too fast: disabled for 5 minutes
Oct 11 20:21:14 s03 init: Id "h1" respawning too fast: disabled for 5 minutes
Oct 11 20:22:06 s03 init: Id "h3" respawning too fast: disabled for 5 minutes
Oct 11 20:26:15 s03 init: Id "h1" respawning too fast: disabled for 5 minutes
Oct 11 20:27:07 s03 init: Id "h3" respawning too fast: disabled for 5 minutes
这应该是原因，但不知道这是什么意思，坐等大牛，看一下

zongg

你起桌面了吧？

还有你这机器负载大不大？

dengbao2001

日志有点少，把重启前后的message, acpid 的日志都贴出来。

yzkarchive

more /etc/inittab

Eric_Guan

回复 5# yzkarchive

#
# inittab       This file describes how the INIT process should set up
#               the system in a certain run-level.
#
# Author:       Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>
#               Modified for RHS Linux by Marc Ewing and Donnie Barnes
#

# Default runlevel. The runlevels used by RHS are:
#   0 - halt (Do NOT set initdefault to this)
#   1 - Single user mode
#   2 - Multiuser, without NFS (The same as 3, if you do not have networking)
#   3 - Full multiuser mode
#   4 - unused
#   5 - X11
#   6 - reboot (Do NOT set initdefault to this)
#
id:3:initdefault:

# System initialization.
si::sysinit:/etc/rc.d/rc.sysinit

l0:0:wait:/etc/rc.d/rc 0
l1:1:wait:/etc/rc.d/rc 1
l2:2:wait:/etc/rc.d/rc 2
l3:3:wait:/etc/rc.d/rc 3
l4:4:wait:/etc/rc.d/rc 4
l5:5:wait:/etc/rc.d/rc 5
l6:6:wait:/etc/rc.d/rc 6

# Trap CTRL-ALT-DELETE
ca::ctrlaltdel:/sbin/shutdown -t3 -r now

# When our UPS tells us power has failed, assume we have a few minutes
# of power left.  Schedule a shutdown for 2 minutes from now.
# This does, of course, assume you have powerd installed and your
# UPS connected and working correctly.  
pf::powerfail:/sbin/shutdown -f -h +2 "Power Failure; System Shutting Down"

# If power was restored before the shutdown kicked in, cancel it.
pr:12345:powerokwait:/sbin/shutdown -c "Power Restored; Shutdown Cancelled"


# Run gettys in standard runlevels
1:2345:respawn:/sbin/mingetty tty1
2:2345:respawn:/sbin/mingetty tty2
3:2345:respawn:/sbin/mingetty tty3
4:2345:respawn:/sbin/mingetty tty4
5:2345:respawn:/sbin/mingetty tty5
6:2345:respawn:/sbin/mingetty tty6

# Run xdm in runlevel 5
x:5:respawn:/etc/X11/prefdm -nodaemon
h1:35:respawn:/etc/init.d/init.evmd run >/dev/null 2>&1 </dev/null
h3:35:respawn:/etc/init.d/init.crsd run >/dev/null 2>&1 </dev/null
   

yzkarchive

回复 6# Eric_Guan


please check the below lines:

h1:35:respawn:/etc/init.d/init.evmd run >/dev/null 2>&1 </dev/null
h3:35:respawn:/etc/init.d/init.crsd run >/dev/null 2>&1 </dev/null  

1: if them exist  in /etc/init.d
2: try to start them manually, check the output.

Eric_Guan

回复 7# yzkarchive

怎么执行？
   

yzkarchive

回复 8# Eric_Guan

there has two ways:
1: according the command in /etc/inittab
    /etc/init.d/init.evmd run
2: check the content of /etc/init.d/init.evmd, find the "usage"   

Eric_Guan

回复 9# yzkarchive


    请问 /etc/init.d/init.evmd run
  是什么意思，能否解释下，生产环境不能随便执行命令啊。