who have done the soft routing with win2k server?

yanziriver

who have done soft routing with win2k server ?
I want to do it with two network card installed in the win2k server,
one NIC got ip from china telecom DHCP server such as 61.145.150.133, ithe othe is private ip such as192.168.0.x.
how to config/ i try many time , but the client in the intranet can\'t
access the internet.....

pls help me !

meng

The private address can\'t be used on internet, so what do you need is not routing, is NAT or proxy. You cat do NAT with win2k, or proxy with some other software, such sygate or MS ISA server.

albertdong

You don\'t need sygate. You need share your NIC which connects internet, check Enable Internet Connection Sharing for this connection on the sharing tab in the properties of this NIC. And anther NIC\'s IP must be 192.168.0.1.
At the client, you need  set its gateway as 192.168.0.1, and  add DNS server same as your server.
The best way is that you install DHCP Server in your windows 2000 server, and add Router and DNS Servers in Scope Options. You set your client as DHCP client.


Good Luck