- 论坛徽章:
- 0
|
本帖最后由 guoweiqust 于 2012-11-08 09:00 编辑
按照上图对linux(centos5.5)扩充完磁盘容量后,
以root用户启动centos,执行下列命令时遇到了问题- [root@localhost ~]# fdisk /dev/sda
- The number of cylinders for this disk is set to 4568.
- There is nothing wrong with that, but this is larger than 1024,
- and could in certain setups cause problems with:
- 1) software that runs at boot time (e.g., old versions of LILO)
- 2) booting and partitioning software from other OSs
- (e.g., DOS FDISK, OS/2 FDISK)
- Command (m for help): n
- No free sectors available
- Command (m for help):
复制代码 求高手指点
另外,执行fdisk -l后的结果如下:- Device Boot Start End Blocks Id System
- / dev / sda1 * 1 6 48163 + 83 Linux
- / dev / sda2 7 515 4088542 + 83 Linux
- / dev / sda3 516 1239 5815530 83 Linux
- / dev / sda4 1240 1305 530145 5 Extended
- / dev / sda5 1240 1305 530113 + 82 Linux swap / Solaris
复制代码 |
|