solaris10 X86 如何在(VMWARE)上网,麻烦大家帮忙.

wsyueshuai

我是solaris新手,昨天才把系统装在VMWARE上,因为没有盘,只有在网上下的SAID的ISO文件,只能在VMWARE上装了.

我家里的真实的机器是普通的宽带上网,是自动获得IP.

公司的机器也是自动获得IP.

Barrfee

vmware有手册，看看吧

wsyueshuai

是不是应该选择NAT的连接方式啊,在VMWARE里都需要怎么设置啊?我都是自动获得的IP的环境.

飞天雄

我也是用VM装solaris10的，新建虚拟机的时候要网络设置选择第一个桥接网络，然后在安装solaris时候设置一个ip地址，还有主机名，路由就是网关的地址。
我们公司的ip地址是固定的。所以分配给他一个地址就好了。

solarislog

好像也是这里的一个文章，记不得是谁写的。我试过多次，屡用屡爽。

＝＝＝＝＝＝＝＝＝＝＝＝
怎样设置Solaris上网


I find there are many guys don\'t know how to setup files to connected to internet and ask the same question again and again. So, I post my configuration file here for those who need reference for internet set up. Hopefully this can help some one a little.

OK, basicly there are 4 file you have to config at Solaris to go to internet:

1. /etc/hosts or /etc/inet/hosts
2. /etc/resolv.conf
3. /etc/nsswitch.conf
4. /etc/defaultrouter

What i have to say is that the files /etc/resolv.conf and /etc/defaultrouter are not existed by default system installation. you have to create that 2 file when you need setup internet.

The following are my configuration file: (192.168.0.3 is my solaris 9 system and 192.168.0.1 is the machine of Windows 2000/XP which has 2 network interfice, one connected to internet by 24.101.186.193 and one connected to solaris9 by interfice 192.168.0.1. You have to choose to share internet for the interface that connected to internet at windows as you have)

Cat /etc/hosts

127.0.0.1 localhost
192.168.0.3 lion loghost
192.168.0.1 router

---------------------------------------------

vi /etc/resolv.conf

nameserver 192.168.0.1

-----------------------------------------------
vi /etc/nsswitch.conf

hosts: files dns

-----------------------------------------------

vi /etc/defaultrouter

router 192.168.0.1