solaris下如何查看自己的ip地址，如何设置自己的ip地址？？

incle

doni 发表于 2013-02-06 12:16
回复 8# incle

谢谢,还有一个问题,  我在dhcp server上重新设置的IP的范围, 然后想到solaris( client) 重新得到IP,
我用了

root@QA248:~# ifconfig mgmtintf0 down
root@QA248:~# ifconfig mgmtintf0 up

这两个命令,但还是得不到新IP

incle

IP 的获得一个是固定的IP, 一个是要得到dhcp IP. 当第一次这个网卡还没得IP之前, 启动dhcp server它是可以拿到IP的,
但重新设IP后就没能自动得到.
=========
  * IPs for mgmtintf0: Two addr objects were created, one looking for dhcp, the other assigned with static IP 199.66

============

root@QA248:~# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000
mgmtintf0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index 2
        inet 192.168.199.61 netmask ffffff00 broadcast 192.168.199.255
        ether 0:25:90:93:81:38
mgmtintf0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 192.168.199.66 netmask ffffff00 broadcast 192.168.199.255
dataintf0: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 9000 index 3
        inet 0.0.0.0 netmask 0
        ether 0:7:43:13:50:10
dataintf1: flags=1000802<BROADCAST,MULTICAST,IPv4> mtu 9000 index 4
        inet 0.0.0.0 netmask 0
        ether 0:7:43:13:50:18
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
        inet6 ::1/128
mgmtintf0: flags=20002000840<RUNNING,MULTICAST,IPv6> mtu 1500 index 2
        inet6 ::/0
        ether 0:25:90:93:81:38
dataintf0: flags=20002000840<RUNNING,MULTICAST,IPv6> mtu 9000 index 3
        inet6 ::/0
        ether 0:7:43:13:50:10
dataintf1: flags=20002000800<MULTICAST,IPv6> mtu 9000 index 4
        inet6 ::/0
        ether 0:7:43:13:50:18

incle

                           

doni

try this:
ifconfig mgmtintf0 dhcp release

这个man ifconfig，可以找到