配MCSG无法自动激活卷组，怎么办？

dinlin2000

配MCSG无法自动激活卷组
每次运行在包控制文件日志　jj1.cntl.log里总是说找不到设备，实际上是没有激活卷组．
每次只有手动用命令 vgchange -a e vg* 后，才能启动包．

  ########### Node \" jj02\": Starting package at Wed Nov 28 17:05:43 EAT 2007 ###########
Nov 28 17:05:43 - Node \" jj02\": Checking filesystems:
   /dev/vgfmapp/lvfmapp
   /dev/vgtadspdb/lvtadspdb
UX:vxfs fsck: ERROR: V-3-20003: /dev/vgfmapp/rlvfmapp:Cannot open /dev/vgfmapp/rlvfmapp: No such device or address
/dev/vgfmapp/rlvfmapp:file system check failure, aborting ...
        ERROR:  Function check_and_mount
        ERROR:  Failed to fsck one of the logical volumes.
UX:vxfs fsck: ERROR: V-3-20003: /dev/vgtadspdb/rlvtadspdb:Cannot open /dev/vgtadspdb/rlvtadspdb: No such device or address
/dev/vgtadspdb/rlvtadspdb:file system check failure, aborting ...
        ERROR:  Function check_and_mount
        ERROR:  Failed to fsck one of the logical volumes.

用vgchange -a e vg* 将包里的卷组激活后，再运行 cmrunpkg就能用了，不知道是哪里出了问题．

Nov 28 17:06:58 - Node \"pajj01\": Checking filesystems:
   /dev/vgfmapp/lvfmapp
   /dev/vgtadspdb/lvtadspdb
/dev/vgfmapp/rlvfmapp:file system is clean - log replay is not required
/dev/vgtadspdb/rlvtadspdb:file system is clean - log replay is not required
Nov 28 17:06:59 - Node \" jj01\": Mounting /dev/vgfmapp/lvfmapp at /app/fm
Nov 28 17:06:59 - Node \" jj01\": Mounting /dev/vgtadspdb/lvtadspdb at /oradata/tadspdb
Nov 28 17:06:59 - Node \" jj01\": Adding IP address 10.58.253.3 to subnet 10.58.253.0

dlcj

MG的配置有问题。很可能是控制脚本的相关项没有打开，不过默认是打开。

在控制脚本中加上 VGCHANGE=\"vgchange -a e\"。

dinlin2000

默认就是这个，没动过．

dinlin2000

搞定了．郁闷啊
第一次配ＭＣＳＧ
ＶＧ［０］我写成了vg[0],改成大写就行了．
竟然总没检查出来。