论坛徽章:: 0

电梯直达

1楼 [收藏(0)] [报告]

发表于 2008-05-10 23:24 |只看该作者 |倒序浏览

一台rx2600在启动的时候出现如下报错，无法进入系统

This boot experienced the following problems:
  ERROR[55]: Invalid or inaccessible system ID(s)

The boot will halt at the Boot Manager.
Do not attempt to boot an O/S before fixing the error(s).
Press [Space] to continue... (seconds=01)

Copyright (c) 2000-2002 Broadcom Corporation
Broadcom NetXtreme Gigabit Ethernet EFI driver v3.0.7

Loading \'FPSWA\'...
Loading \'lsi1030\'...
Loading \'gigundi\'...
2 0 0x00020B 0x0000000000000006 EFI Launching Boot Manager
Scsi(Pun0,Lun0) HP 73.4GST373453LC    HPC8Cannot determine device capacity
Scsi(Pun0,Lun0) HP 73.4GST373453LC    HPC8
ERROR: Cannot initialize SCSI Device
Scsi(Pun1,Lun0) HP 146 GST3146807LC    HPC8Cannot determine device capacity
Scsi(Pun1,Lun0) HP 146 GST3146807LC    HPC8
ERROR: Cannot initialize SCSI Device
Scsi(Pun0,Lun0) HP 36.4GMAN3367MC    HP05 ( 40 MBytes/sec)
Scsi(Pun2,Lun0) HP 146 GST3146807LC    HPC8 ( 40 MBytes/sec)
Broadcom NetXtreme Gigabit Ethernet Adapter is detected (PCI)
EFI Boot Manager ver 1.10 [14.61]  Firmware ver 2.21 [4334]
Stop Boot condition detected. Only EFI shell can be started
Loading device drivers

EFI Boot Manager ver 1.10 [14.61]  Firmware ver 2.21 [4334]
Stop Boot condition detected. Only EFI shell can be started
Please select a boot option
Use ^ and v to change option(s). Use Enter to select an option
Use ^ and v to change option(s). Use Enter to select an option

Stop Boot condition detected !!
Only EFI shell or approved diagnostic can be started

MP卡vfp的输出如下：

Status  |  Running non-OS code. (i.e. Boot or Diagnostics)
-----------------------------------------------------------------------------
LEDs | LOCATOR    | SYSTEM    | POWER
-----------------------------------------------------------------------------
      | OFF       | FLASH YELLOW | ON GREEN
-----------------------------------------------------------------------------
Status  |  Running non-OS code.  Non-critical error detected.
      |  Check System Event Log (SL) for error messages.
      |  Reading System Event Log will turn off the Attention LED.

在EFI下看到的I/O INFORMATION

I/O INFORMATION

BOOTABLE DEVICES

Order  Media Type  Path
-----  ----------  ---------------------------------------

Press ENTER to continue, \'q\' to exit:

ERROR: Cannot initialize SCSI Device代表什么意思呢？系统识别不到启动盘了吗？
Running non-OS code.又是什么意思呢？
为什么I/O INFORMATION下没有可启动的设备呢？

第一次接触安腾的机器，EFI界面就更不熟了。
企望各位大侠指点一二。