系统启动出现问题，使用超级终端登陆到系统，提示如下

big_power

Boot device: disk  File and args:
SunOS Release 5.8 Version Generic_108528-13 64-bit
Copyright 1983-2001 Sun Microsystems, Inc.  All rights reserved.
WARNING: forceload of drv/SUNW,fas failed
Starting VxVM restore daemon...
VxVM starting in boot mode...
NOTICE: vxvm:vxdmp: added disk array SEAGATE_DISKS

configuring IPv4 interfaces: hme0 hme1.
Hostname: JXPROD
VxVM starting special volumes ( swapvol )...
vxvm:vxvol: ERROR: changing plex swapvol-01:
        License has expired or is not available for operation
/dev/vx/dsk/swapvol: No such device or address
VxVM general startup...
vxvm:vxconfigd: ERROR: enable failed: License has expired or is not available fo
r operation
        transactions are disabled.
      Dump content: kernel pages
       Dump device: /dev/dsk/c0t0d0s1 (dedicated)
Savecore directory: /var/crash/JXPROD
  Savecore enabled: yes
vxvm: Vold is not enabled for transactions
        No volumes started
The system is coming up.  Please wait.
checking ufs filesystems
/dev/vx/rdsk/app: No such device or address
Can\'t open /dev/vx/rdsk/app
/dev/vx/rdsk/app: CAN\'T CHECK FILE SYSTEM.
/dev/vx/rdsk/app: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
/dev/vx/rdsk/dbdg/dback: No such device or address
Can\'t open /dev/vx/rdsk/dbdg/dback
/dev/vx/rdsk/dbdg/dback: CAN\'T CHECK FILE SYSTEM.
/dev/vx/rdsk/dbdg/dback: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.

WARNING - Unable to repair one or more filesystems.
Run fsck manually (fsck filesystem...).
Exit the shell when done to continue the boot process.


Type control-d to proceed with normal startup,
(or give root password for system maintenance):

big_power

能够登陆到单用户下，但是感觉该工作站下的外挂磁盘未能识别到，请问有什么解决办法

云杉上的蝴蝶

License has expired or is not available fo
r operation。
具体查下VxVM的License！

可能是你的demo License到期，建议申请新的demo license 。

云杉上的蝴蝶

vxlicrep
用这个看下License的有效期，如果确实到期了，尝试修改系统时间到License的有效时间内，然后重启看看！

weiwo

蝴蝶兄，我单位小机上的vxvm以前有个demo license，后来换了个永久的，但是现在用vxlicrep查看仍然可看到以前demo那个，并且到期事件为-10天（即已经过期10天），请问这个demo的不会对在用的有什么影响吧？

云杉上的蝴蝶

你是用#vxlicense -c  加的license吧，应该是没问题的！
你可以用
VRTSlic   （VxVM licensing utilities ），确认下哪个是当前使用的license！