我的ULTRA10多次重起，请指教。

YongkangM

# dmesg \r\n\r\n........ DCESAM: unix: cpr: system is being suspended .\r\n\r\n该如何??

feng4321

把你的问题说的详细些

海天

在电源管理里面把模式改成，stander\r\n具体在CDE里面的power manager里面很清楚了

YongkangM

[quote]原帖由 \"feng4321\"]把你的问题说的详细些[/quote 发表：\n\r\n\r\n\r\n是这样， 这几天，它多次重起。\r\n其上装的程序： IBM DEC3。1  + 我们的OMC 软件。\r\n\r\n多次突如其来， 查LOG ， \r\n  显示“ unix :cpr : system is being suspened .\r\n   ..... syslogd : going down on signal 15 \r\n   ..... unix : syning file system  .....\r\n重新启动 ！！\r\n\r\n我怀疑是 “cpr \" 有问题。\r\n # find / -name \"cpr\"\r\n     /platform/sun4u/kernel/misc/\r\n\r\n\r\n多谢 ！！！

YongkangM

原帖由 \"海天\" 发表：\n在电源管理里面把模式改成，stander\r\n具体在CDE里面的power manager里面很清楚了

\r\n\r\n\r\n多谢。\r\n\r\n该改那个文件 ？ \r\n是 /etc/power.conf ? 那个参数 ？

feng4321

Checkpoint-Resume (CPR) functionality, which is the ability to go intostandby mode, is now supported.\r\n应该是电源管理的问题\r\n照楼上兄弟的方法试试\r\n你也可以man cpr 或者看/etc/power.conf

feng4321

The following is a sample power.conf file.\r\n# This is a sample power management configuration file\r\n# Fields must be separated by white space.\r\n#\r\n# Name Threshold(s) Logical Dependent(s)\r\n/dev/kbd 1800\r\n/dev/mouse 1800\r\n/dev/fb 0 0 /dev/kbd /dev/mouse\r\n#Example of a second display\r\n/dev/fb1 0 0 /dev/kbd /dev/mouse\r\n# This entry is maintained by the dtpower utility\r\n# This (default as of SunOS 5.5) entry causes the system to be\r\n# shut down after 30 minutes of idle time if it is a model first\r\n# shipped after Oct 1, 1995. Older models default to noshutdown.\r\n#\r\n# autoshutdown in effect\r\n# Auto-Shutdown Idle(min) Start/Finish(hh:mm) Behavior\r\nautoshutdown 30 9:00 9:00 default ////注意这行。\r\n# Statefile Path\r\nstatefile /export/home/.CPR\r\n# The idlecheck program is passed the autoshutdown idle time entry in\r\n# the environment variable $PM_IDLETIME and it must return the number of\r\n# minutes the system has been idle (by its criteria) in its exit code.\r\nidlecheck /home/critical/idlecheck\r\n\r\n\r\n或者SDTpowermgr\r\n在桌面上的图标里面会找到\r\n希望会对你有帮助

海天

在图形界面下，右击鼠标，tools－>;power manager->;stander下面有个more的东西，打开看看就知道了

YongkangM

[quote]原帖由 \"海天\"]在图形界面下，右击鼠标，tools－>;power manager->;stander下面有个more的东西，打开看看就知道了[/quote 发表：\n\r\n\r\n\r\n多谢 ！\r\n我修改变“/etc/power.conf \" , 再观察 。

YongkangM

原帖由 \"feng4321\" 发表：\nThe following is a sample power.conf file.\r\n# This is a sample power management configuration file\r\n# Fields must be separated by white space.\r\n#\r\n# Name Threshold(s) Logical Dependent(s)\r\n/dev/kbd 18..........

\r\n\r\n\r\n\r\n多谢 ！！