- 论坛徽章:
- 0
|
紧急求援，freebsd下不认磁盘阵列柜，请高手指点。
小弟的dmesg.boot文件如下：
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.10-RELEASE #0: Wed Aug 18 16:47:54 GMT 2004
root@wnxxzx_s01.org:/usr/obj/usr/src/sys/mykernel
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (399.07-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x651 Stepping = 1
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>;
real memory = 268435456 (262144K bytes)
avail memory = 255819776 (249824K bytes)
Preloaded elf kernel "kernel" at 0xc0540000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor>; on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)>; on motherboard
pci0: < CI bus>; on pcib0
pci0: <Cirrus Logic GD5446 SVGA controller>; at 11.0
pcib1: <DEC 21150 PCI-PCI bridge>; at device 13.0 on pci0
pci1: <CI bus>; on pcib1
tl0: <Compaq Netelligent 10/100 Proliant>; port 0x2800-0x280f mem 0xc6ffddf0-0xc6ffddff irq 5 at device 7.0 on pci1
tl0: Ethernet address: 00:08:c7:09:41:ee
miibus0: <MII bus>; on tl0
nsphy0: <DP83840 10/100 media interface>; on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlphy0: <ThunderLAN 10baseT media interface>; on miibus0
tlphy0: 10base2/BNC, 10base5/AUI
sym0: <875>; port 0x2000-0x20ff mem 0xc6fff000-0xc6ffffff,0xc6ffdf00-0xc6ffdfff irq 9 at device 9.0 on pci1
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: <875>; port 0x2400-0x24ff mem 0xc6ffe000-0xc6ffefff,0xc6ffde00-0xc6ffdeff irq 10 at device 9.1 on pci1
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
pci0: <unknown card>; (vendor=0x0e11, dev=0xa0f0) at 14.0
isab0: <Intel 82371AB PCI to ISA bridge>; at device 20.0 on pci0
isa0: <ISA bus>; on isab0
atapci0: <Intel PIIX4 ATA33 controller>; port 0xf100-0xf10f at device 20.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller>; irq 0 at device 20.2 on pci0
uhci0: Could not map ports
device_probe_and_attach: uhci0 attach returned 6
chip1: <Intel 82371AB Power management controller>; at device 20.3 on pci0
eisa0: <EISA bus>; on motherboard
mainboard0: <CPQ0689 (System Board)>; on eisa0 slot 0
orm0: <Option ROMs>; at iomem 0xc0000-0xc7fff,0xe8000-0xedfff,0xee000-0xeffff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone>; at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive>; on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)>; at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard>; flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <S/2 Mouse>; irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA>; at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console>; at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>;
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: cannot reserve I/O port range
acd0: CDROM <SAMSUNG CD-ROM SC-140F>; at ata0-master PIO4
Waiting 30 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at sym0 bus 0 target 0 lun 0
da0: <QUANTUM VIKING II 4.5SCA 5520>; Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled
da0: 4350MB (8910423 512 byte sectors: 255H 63S/T 554C)
da1 at sym0 bus 0 target 1 lun 0
da1: <QUANTUM VIKING II 4.5SCA 5520>; Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled
da1: 4350MB (8910423 512 byte sectors: 255H 63S/T 554C)
恳请各位老大赐教？ |
|
免费注册
发表于 2004-08-13 14:08
