- 论坛徽章:
- 0
|
which command can list san robot device
To see the robot, you need to configure a driver for it. For example, you can use generic SCSI driver (driver might different depending on your device. Check with your backup software to make sure that they can provide one.)\r\n\r\nIf using generic SCSI driver, create /kernel/drv/sgen.conf with\r\n\r\ndevice-type-config-list=\"changer\", \"sequential\"; # this will force the driver to attach only to the devices with type either changer (robot) and sequential (tape).\r\nname=\"sgen\" class=\"scsi\" target=3 lun=0; # which id it should check for (id 3 in this example). \r\n\r\nThis will create 2 device files under /dev/scsi/changer & /dev/scsi/sequential |
|