请教shmmax的设置

miggy

我在执行一个程序的时候，报错如下：\r\n---ALL RIGHTS RESERVED---\r\nMessage: Starting server database broker and page writers.\r\n16:01:18 SERVER   : Maximum number of shared-memory segments per process exceeded. (1175)\r\n16:01:18 SERVER   : ** The server terminated with exit code 2. (800)\r\n\r\n我的etc/system文件内容如下：\r\nbash-2.03# more /etc/system\r\n*ident  \"@(#)system     1.18    97/06/27 SMI\" /* SVR4 1.5 */\r\n*\r\n* SYSTEM SPECIFICATION FILE\r\n*\r\n\r\n* moddir:\r\n*\r\n*       Set the search path for modules.  This has a format similar to the\r\n*       csh path variable. If the module isn\'t found in the first directory\r\n*       it tries the second and so on. The default is /kernel /usr/kernel\r\n*\r\n*       Example:\r\n*               moddir: /kernel /usr/kernel /other/modules\r\n\r\n\r\n\r\n* root device and root filesystem configuration:\r\n*\r\n*       The following may be used to override the defaults provided by\r\n*       the boot program:\r\n*\r\n*       rootfs:         Set the filesystem type of the root.\r\n*\r\n*       rootdev:        Set the root device.  This should be a fully\r\n*                       expanded physical pathname.  The default is the\r\n*                       physical pathname of the device where the boot\r\n*                       program resides.  The physical pathname is\r\n*                       highly platform and configuration dependent.\r\n*\r\n*       Example:\r\n*               rootfs:ufs\r\n*               rootdev:/sbus@1,f8000000/esp@0,800000/sd@3,0:a\r\n*\r\n*       (Swap device configuration should be specified in /etc/vfstab.)\r\n\r\n\r\n\r\n* exclude:\r\n*\r\n*       Modules appearing in the moddir path which are NOT to be loaded,\r\n*       even if referenced. Note that `exclude\' accepts either a module name,\r\n*       or a filename which includes the directory.\r\n*\r\n*       Examples:\r\n*               exclude: win\r\n*               exclude: sys/shmsys\r\nshmsys:shminfo_shmmni= 3248\r\nshmsys:shminfo_shmseg= 64\r\nshmsys:shminfo_shmmax= 1048576000\r\nsemsys:seminfo_semmnu= 500\r\nsemsys:seminfo_semmni= 128\r\nsemsys:seminfo_semmsl= 256\r\nsemsys:seminfo_semmns= 500\r\nsemsys:seminfo_semmnu= 500\r\n\r\n\r\n\r\n* forceload:\r\n*\r\n*       Cause these modules to be loaded at boot time, (just before mounting\r\n*       the root filesystem) rather than at first reference. Note that\r\n*       forceload expects a filename which includes the directory. Also\r\n*       note that loading a module does not necessarily imply that it will\r\n*       be installed.\r\n*\r\n*       Example:\r\n*               forceload: drv/foo\r\n\r\n\r\n\r\n* set:\r\n*\r\n*       Set an integer variable in the kernel or a module to a new value.\r\n*       This facility should be used with caution.  See system(4).\r\n*\r\n*       Examples:\r\n*\r\n*       To set variables in \'unix\':\r\n*\r\n*               set nautopush=32\r\n*               set maxusers=40\r\n*\r\n*       To set a variable named \'debug\' in the module named \'test_module\'\r\n*\r\n*               set test_module:debug = 0x13\r\n\r\n机器是sun 250,2G内存\r\n请教如何解决。\r\n谢谢！