免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 2931 | 回复: 5

{help} V880 不能启动!!!! [复制链接]

论坛徽章:
0
发表于 2004-10-14 13:52 |显示全部楼层
Rebooting with command: boot\r\nBoot device: disk0  File and args: \r\nSunOS Release 5.8 Version Generic_117000-03 64-bit\r\nCopyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.\r\nNOTICE: \r\nEmulex LightPulse FC SCSI/IP 6.00g\r\nNOTICE: lpfc0: Firmware Rev 3.90A7 (C2D3.90A7)\r\nNOTICE: lpfc0: WWPN:10:00:00:00:c9:3d:2b:4d WWNN:20:00:00:00:c9:3d:2b:4d DID 0x10000\r\nNOTICE: lpfc1: Firmware Rev 3.90A7 (C2D3.90A7)\r\nNOTICE: lpfc1: WWPN:10:00:00:00:c9:3d:2b:7f WWNN:20:00:00:00:c9:3d:2b:7f DID 0x10000\r\nPowerPath:powermt set volume_open_policy=firstpath\r\nStarting VxVM restore daemon...\r\nVxVM starting in boot mode...\r\nNOTICE: vxvm:vxdmp: added disk array DISKS, datype = Disk\r\n\r\nconfiguring IPv4 interfaces: ce0 eri0 ge0.\r\nHostname: xxxxx\r\n\r\n/sbin/rcS: /usr/bin/loadkeys: not found\r\n/etc/rcS.d/S35vxvm-startup1: /usr/lib/vxvm/voladm.d/lib/vxadm_lib.sh: not found\r\n/sbin/swapadd: expr: not found\r\nswapadd: file system table (/etc/vfstab) not found\r\n\r\nWARNING - /usr/sbin/fsck not found.  Most likely the\r\nmount of /usr failed or the /usr filesystem is badly\r\ndamaged.  The system is being halted.  Either reinstall\r\nthe system or boot with the -b option in an attempt\r\nto recover.\r\n\r\nSUNW,pci-gem0: Using Gigabit SERDES Interface\r\nSUNW,pci-gem0: Auto-Negotiated 1000 Mbps Full-Duplex Link Up\r\nsyncing file systems... done\r\nProgram terminated\r\n{1} ok \r\n  现在用光盘引导已经不能mount上根区。\r\n #boot cdrom -s\r\n INIT: SINGLE USER MODE\r\n# mount /dev/dsk/c1t0d0s0 /mnt\r\nmount: the state of /dev/dsk/c1t0d0s0 is not okay\r\n        and it was attempted to be mounted read/write\r\nmount: Please run fsck and try again\r\n\r\n\r\n\r\n各位老大帮忙看看,谢谢!!!

论坛徽章:
0
发表于 2004-10-14 14:05 |显示全部楼层

{help} V880 不能启动!!!!

大家有何高见,急!!!!!!!!!!!!!!!!!

论坛徽章:
0
发表于 2004-10-14 14:05 |显示全部楼层

{help} V880 不能启动!!!!

已经提示你用fsck修复文件系统了

论坛徽章:
0
发表于 2004-10-14 14:09 |显示全部楼层

{help} V880 不能启动!!!!

fsck也没有用的。系统里的fsck已经丢失。用光盘上的\r\n#fsck -y  /dev/dsk/c1t0d0s0 \r\n也没有用的。

论坛徽章:
0
发表于 2004-10-14 14:23 |显示全部楼层

{help} V880 不能启动!!!!

也许你的文件系统没有坏,我也碰到过和你一样的现象,你只要强行将/usr分区mount上去,然后再做你想做的操作。可靠一点的话,最后还是要做一下fsck的。强行mount的命令是:\r\nmount –o rw /dev/dsk/c1t0d0s0 /mnt

论坛徽章:
0
发表于 2004-10-14 15:43 |显示全部楼层

{help} V880 不能启动!!!!

现在发现vfstab的确有问题。正在解决中。。。。。。。。。。。。。
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP