solaris下配置光纤带库

flyerzh

现在有一台dell 132T（相当于adic scalar 24）和一台sun的小机，emulex e10000的光纤卡 \r\n是光纤直连，在windows系统可以认得出磁带机和机械臂\r\n\r\nsolaris磁带机应该如何来配，现在好像系统根本就认不到磁带机。\r\nst.conf中如何能知道lun号的对应 ，我已经加了足够多的lun\r\n\r\nwindows的主机就可以认到，都是一样的环境\r\n\r\n而且这hba卡在solaris下可以认到光纤盘柜\r\n\r\n还有个问题就是怎样来识别磁带机是否装好，rmt下磁带机怎样命名？

king3171

我记得安装SUN L100带库的时候，把SUN主机的HBA卡和带库的光纤卡连好，把带库电源打开开机以后，在主机上运行一下devfsadm以后，带库就认到了，使用cfgadm -a 和cfgadm -l就可以看到带库，这时在/dev/rmt 目录下就会多出1，2这两个文件，使用rmt/1和rmt/2就可以访问磁带库了。

sun_up

I can\'t find the model of LP e1000 on Emulex website http://www.emulex.com/products/fc/index.html. \r\n\r\ne model is a family of Emulex 4 Gb FC PCI Express HBA. It isn\'t supported on Solaris now in the techical specification \r\nhttp://www.emulex.com/products/fc/e11k/ds.html and HBA driver website http://www.emulex.com/ts/downloads/lpe11xxx/11000.html.\r\n\r\nI suggest you to check if the Emulex HBAnyware is installed on your Sun system running pkginfo | grep HBAnyware.\r\n# pkginfo | grep HBAnyware\r\nsystem      HBAnyware                        Emulex HBAnyware FC Host Bus Adapter Remote Manager\r\n\r\nIf you can\'t find it, you need to download the HBA driver in http://www.emulex.com/ts/downloads/solpci/sol.html and install it. The software is included in the driver package.\r\n\r\nOnce you run /usr/sbin/hbanyware/hbanyware, the utility should detect the HBA and show you the mapping target and lun. If it fails to display the HBA, the HBA may not be supported on Solaris. \r\n\r\nContact with Emulex support guys to make sure the HBA works on Solaris.

风之幻想

如果确认你的HBA卡看到了磁带库的话,用cfgadm -al看到正常.把/dev/rmt下的东西都删除.然后用devfsadm重新生成以后就因该可以看到你的磁带驱动器了.

flyerzh

知道是什么问题了\r\n原来是hba的配置文件问题\r\nlpfc.conf需要配一下