免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 3683 | 回复: 4
打印 上一主题 下一主题

求助:服务器启动后出现:trap 3e ok 就进不去,求解决办法!!!!!!!! [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2005-12-06 10:06 |只看该作者 |倒序浏览
最初状态是服务器启动后,提示如下:\r\nenter run level(0~6,s or S [3]):\r\n在提示符后,建入s,并回车,进入单用户模式后,用fsck进行了修复,系统再次启动时出现trap 3e ok提出后,就不继续启动了,在此状态下建入boot -s 想进入单用户模式,回车后仍提示:trap 3e ok;\r\n请大侠们帮看看是什么问题,怎么解决,谢谢了

论坛徽章:
0
2 [报告]
发表于 2005-12-06 13:39 |只看该作者
大家有人知道吗?

论坛徽章:
1
2015年迎新春徽章
日期:2015-03-04 09:54:45
3 [报告]
发表于 2005-12-06 14:28 |只看该作者
TRAP 3E\r\nCause\r\n\r\nThe Ultra system fails to boot with TRAP 3E. The system sometimes also displays bad magic number errors.\r\n\r\nThis error is caused by a bad super block on the boot disk. Which, in turn, could have been caused by a SCSI configuration problem.\r\nAction\r\n\r\nTo fix:\r\n\r\n   1.\r\n\r\n      Check the SCSI bus for illegal configuration, bad cables, and duplicate SCSI addresses.\r\n   2.\r\n\r\n      Boot from CD-ROM as single user.\r\n\r\n      OK boot cdrom -sw\r\n\r\n   3.\r\n\r\n      Attempt to fsck(1M) boot disk. This could fail with a super block error.\r\n\r\n      # fsck /dev/rdsk/device\r\n\r\n   4.\r\n\r\n      Find the locations of alternate super blocks. BE SURE TO USE AN UPPERCASE -N. For example:\r\n\r\n      # newfs -N /dev/rdsk/c0t0d0s0\r\n      /dev/rdsk/c0t0d0s0:     2048960 sectors in 1348 cylinders of 19 tracks, \r\n      80 sectors 1000.5MB in 85 cyl groups (16 c/g, 11.88MB/g, 5696 i/g)\r\n      super-block backups (for fsck -F ufs -o b=#) at:\r\n      32, 24432, 48832, 73232, 97632, 122032, 146432, 170832, 195232, 219632,\r\n      244032, 268432, 292832, 317232, 341632, 366032, 390432, 414832, 439232,\r\n      463632, 488032, 512432, 536832, 561232, 585632, 610032, 634432, 658832,\r\n      683232, 707632, 732032, 756432, 778272, 802672, 827072, 851472, 875872,\r\n      900272, 924672, 949072, 973472, 997872, 1022272, 1290672, ...\r\n\r\n   5.\r\n\r\n      Using an alternate super block, run fsck(1M) on the disk. You might have to try more than one alternate super block to make this to work. Pick a couple from the beginning, the middle, and the end.\r\n\r\n      # fsck -o b=<altblk> /dev/rdsk/c0t0d0s0\r\n\r\n   6.\r\n\r\n      The boot block is probably bad too. Restore it while you are booted from the CD-ROM.\r\n\r\n      # /usr/sbin/installboot /usr/platform/architecture/lib/fs/ufs/bootblk \r\n      /dev/rdsk/c0t0d0s0\r\n\r\n   7.\r\n\r\n      Reboot the operating environment.\r\n\r\n      # reboot

论坛徽章:
0
4 [报告]
发表于 2005-12-06 18:26 |只看该作者
谢谢:junglelion  谢谢大家 \r\n我试试看

论坛徽章:
1
荣誉会员
日期:2011-11-23 16:44:17
5 [报告]
发表于 2006-04-18 18:36 |只看该作者
精辟!佩服佩服!又长知识了……
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP