Solaris 9 disk suite cluster3.1 oracle10g 双机安装文档（原创）

zyl555

Do you want to use autodiscovery anyway (yes/no) [no]?  yes\r\n    Probing .....................\r\n\r\n    The following connection was discovered:\r\n\r\n        sys-1:ce1  switch2  sys-2:ce1\r\n\r\n    Probes were sent out from all transport adapters configured for\r\n    cluster node \"sys-1\". But, they were only received on one of the\r\n    network adapters on this machine (\"sys-2\"). This may be due to\r\n    any number of reasons, including improper cabling, an improper\r\n    configuration for \"sys-1\", or a switch which was confused by the\r\n    probes.\r\n\r\n    You can either attempt to correct the problem and try the probes\r\n    again or try to manually configure the transport. Correcting the\r\n    problem may involve re-cabling, changing the configuration for\r\n    \"sys-1\", or fixing hardware.\r\n\r\n    Do you want to try again (yes/no) [yes]?  no\r\n\r\n\r\n这一步只搜索到了switch2，为什么不选yes，继续搜索把switch1也找到呢？

7945ssp

楼主: 辛苦了,请问在 建立共享磁盘集的时候\r\n\r\n⑤        在oraset/d110上建立软分区存放oracle数据库文件\r\n    # metainit oraset/d111 -p d110 50m\r\noraset/d111: Soft Partition is setup\r\n# metainit oraset/d112 -p d110 50m\r\noraset/d112: Soft Partition is setup\r\n# metainit oraset/d113 -p d110 50m\r\noraset/d113: Soft Partition is setup\r\n# metainit oraset/d114 -p d110 1024m\r\noraset/d114: Soft Partition is setup\r\n# metainit oraset/d115 -p d110 1024m\r\noraset/d115: Soft Partition is setup\r\n# metainit oraset/d116 -p d110 1024m\r\noraset/d116: Soft Partition is setup\r\n# metainit oraset/d117 -p d110 1024m\r\noraset/d117: Soft Partition is setup\r\n# metainit oraset/d118 -p d110 1024m\r\noraset/d118: Soft Partition is setup\r\n# metainit oraset/d119 -p d110 2048m\r\noraset/d119: Soft Partition is setup\r\n# metainit oraset/d120 -p d110 2048m\r\noraset/d120: Soft Partition is setup\r\n# metainit oraset/d121 -p d110 2048m\r\noraset/d121: Soft Partition is setup\r\n# metainit oraset/d122 -p d110 8192m\r\noraset/d122: Soft Partition is setup\r\n\r\n\r\n在sys-2能看到这个软分区吗?我在solaris8X86+sun cluster 3.1中模拟,建立多属主的磁盘集,然后建立软分区,但是只能在一台机器上看见这个软分区.另一台机器看不见,并且执行devfsadm -C 也出错,请大虾指点

samwang816

顶顶顶顶顶顶顶顶顶顶顶顶

米问题

让我找到这篇文章真好\r\n嗯，谢谢楼主！

wstar

谢谢lz，真是辛苦。亲身经历写的，很详细。很有帮助。