请教怎么在solairs上怎么解压和安装*.raw.gz文件吗？

whitecup_1979

NCPPrecision_V3.3.6.0-D_Solaris2.raw.gz

whitecup_1979

bash-2.03# gzip -d NCPPrecision_V3.3.6.0-D_Solaris2.raw.gz\r\n\r\ngzip: NCPPrecision_V3.3.6.0-D_Solaris2.raw.gz: unexpected end of file

boronpeng

The raw.gz file is a tar archive file that has been compressed with gzip, for more information on this see the above Introduction section. This archive contains the raw file collect at each CTD cast, which is represented by a set of four files containing a bottle-firing file (.bl), a configuration file (.con), a data file (.dat) and a header file (.hdr).   Casts are named with the following g301EEE.ext, where g is for the LMG, 301 is the cruise 0301, EEE is the event number, and ext is the extention (bl, con, dat, hdr).  For example; the raw files associated with the event 007 on this cruise are: g0301007.bl, g0301007.con, g0301007.dat, g0301007.hdr.  The raw data files(*.dat) are binary files.\r\n\r\n\r\n\r\nhttp://www.xbox-linux.org/wiki/C ... thout_Hotswap_HOWTO\r\n中有个这个\r\nInstall the dash if a copy is available (D4920.raw.gz) by the following command. Note: the gamesave E partition does not have to be copied onto the new drive in order for it to boot: \r\n\r\nzcat D4920.raw.gz| dd of=/dev/hdc seek=4501 bs=512k\n\n[ 本帖最后由 boronpeng 于 2006-5-26 15:39 编辑 ]

whitecup_1979

看不懂，有没有中文的吗？

whitecup_1979

cat NCPPrecision_V3.3.6.0-D_Solaris2.raw.gz | dd of=/dev/hdc seek=4501 bs=512k\r\n\r\n这样做后出来了个/dev/hdc,然后怎么mount上去吗？

wwxipconfig

如果你有多余的硬盘，可以这样试试,我也没有做过，看3楼的帖子，我觉得应该是这样,如果你现在有一张空的硬盘，是c0t1d0的话\r\n#cat NCPPrecision_V3.3.6.0-D_Solaris2.raw.gz | dd of=/dev/dsk/c0t1d0s2 bs=100k\r\n#fsck /dev/rdsk/c0t1d0s2 \r\n#mount /dev/dsk/c0t1d0s2 /mnt \r\n然后看看/mnt下面是什么东西！\r\n小心操作！^_^\r\n也希望版主出来露一手，^_^