在Solaris 9 下安装QLogic光纤卡。

boronpeng

经验啊\r\n以后晓得驱动要在有设备的时候才能装\r\n\r\n要不会出麻烦的

tianma23

首先，安装QLOGIC提供的包qla2300.v5.sparc_pkg.Z。\r\n然后，安装SAN_4.4.10_install_it.tar.Z。\r\n#uncompress SAN_4.4.10_install_it.tar.Z\r\n#ls –l\r\nSAN_4.4.10_install_it      qla2300.v5.sparc_pkg\r\nSAN_4.4.10_install_it.tar\r\n#cd SAN_4.4.10_install_it\r\n# ls\r\ninstall_it  misc\r\n# ./install_it\r\n按提示安装完该安装的补丁。提示reboot服务器。\r\n#reboot -- -r \r\n机器起来之后，看到qla2340卡上的橙色指示灯闪烁，qla2340光纤卡驱动安装成功。\r\n==========================================================  \r\n总结：安装qla2300.v5.sparc_pkg 和 SAN_4.4.10_install_it 应该就可以将光纤卡驱动起来。

sun_up

The user is allowed to install the two kinds of HBA drivers for qla2300 HBA on Sun Sparc system running Solaris 10 recently. \r\nWhen you install Sun patch for qla2300, a HBA driver called qlc is installed on the system and runs with qla2300. When you install qla2300.v5.sparc_pkg.Z, a HBA driver called qla is installed on the system and runs with this HBA actually. So, you are running qla driver with qla2300 HBA now. The qla driver will be showed out running # modinfo command on your system.\r\n\r\nBefore to install QLogic or Emulex HBA on your Solaris system, you need to make sure what HBA driver is requested for the HBA.

lockemaomao

我装了Qlogic提供的Package后，cfgadm -al看到的不是sun标准的c2 c3而是另外一个咚咚，这是怎么回事呢？

huanglao2002

两个包 \r\nSolaris 8/9 SFS Base Packages\r\n\r\nName            Solaris 8               Solaris 9 \r\n\r\nfcp          not applicable      113046-xx\r\nluxadm, liba5k.so.2   not applicable    113049-xx\r\nSun StorEdge Traffic Manager patch 111412-xx 113039-xx\r\nfctl/fp/fcp/usoc driver 111095-xx 113040-xx\r\nfcip driver 111096-xx 113041-xx\r\nqlc driver 111097-xx 113042-xx\r\nluxadm/liba5k and libg_fc patch 111413-xx 113043-xx\r\ncfgadm fp plug-in library patch 111846-xx 113044-xx\r\nSAN Foundation Software patch 111847-xx 111847-xx

lockemaomao

是一个SFS，一个SAN的包吧~~~