6800错误信息,请帮分析？？

zjc_0264

Jun 02 04:55:41 [135.129.26.235.2.2] JYFX2-SC0 Platform.SC: [ID 346975 local2.error] RP0: SepromContainer.writeOut: sun.serengeti.I2cException: verify error: offset=0042, expected=0xf0, observed=0x00\r\nJun  2 06:38:40 ETL SUNW,UltraSPARC-III+: [ID 286260 kern.info] NOTICE: [AFT0] Corrected system bus (CE) Event detected by CPU2 at TL=0, errID 0x00207bb2.9dabbf6c\r\nJun  2 06:38:40 ETL     AFSR 0x00000002<CE>.00000037 AFAR 0x000000a0.94b1ba70\r\nJun  2 06:38:40 ETL     Fault_PC 0x1000c148 Esynd 0x0037 Slot A: J8000\r\nJun  2 06:38:40 ETL SUNW,UltraSPARC-III+: [ID 832850 kern.info] [AFT0] errID 0x00207bb2.9dabbf6c Corrected Memory Error on Slot A: J8000 is Intermittent\r\nJun  2 06:38:40 ETL SUNW,UltraSPARC-III+: [ID 326885 kern.info] [AFT0] errID 0x00207bb2.9dabbf6c Data Bit 66 was in error and corrected\r\nJun  2 06:38:40 ETL SUNW,UltraSPARC-III+: [ID 716855 kern.info] [AFT2] errID 0x00207bb2.9dabbf6c PA=0x000000a0.94b1ba40\r\nJun  2 06:38:40 ETL     E$tag 0x00000282.52000024 E$state_1 Modified\r\nJun  2 06:38:40 ETL SUNW,UltraSPARC-III+: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0x8012006d.ffff876d 0x80120013.ffff8713 ECC 0x176\r\nJun  2 06:38:40 ETL SUNW,UltraSPARC-III+: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0x8712007c.fffff77c 0x80120011.ffff8711 ECC 0x15e\r\nJun  2 06:38:40 ETL SUNW,UltraSPARC-III+: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0x8012007e.ffff877e 0x8012007c.ffff877c ECC 0x14a\r\nJun  2 06:38:40 ETL SUNW,UltraSPARC-III+: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0x80120003.ffff8703 0x80120012.ffff8712 ECC 0x0dd\r\nJun  2 06:38:40 ETL SUNW,UltraSPARC-III+: [ID 929717 kern.info] [AFT2] D$ data not available\r\nJun  2 06:38:40 ETL SUNW,UltraSPARC-III+: [ID 335345 kern.info] [AFT2] I$ data not available

vincentlin

這是系統/var/adm/messages 的訊息!! 可以在 SC 下執行 showcomponent 嗎? 還有 showlog 的結果?因為單從你的資料無法判斷是 CPU or Memory or Memory controller 或是其他問題?