请问系统没有安装DISK SUITE包，如何给根盘做镜像？

mjxyx

那我现在能不能这样处理,把那新加的盘除掉,然后按你的方法用VXDISKSETUP处理,可以吗?不过现在不在现场也不能远程连接,唉,要明天才可是试了.谢谢.

mjxyx

恩,有同感,确实不一样.我们这些小虾米需要多学习,要不然长不大还可能被大鱼吃了!

mjxyx

你好,按\r\n#pkginfo -l VRTSvxvm\r\n显示版本是3.5的,不知现在是否需要重新把该盘先删掉?然后再用vxdisksetup加进去,可以吗?在线等.

东方蜘蛛

你直接用vxdiskadm选项5试试！\n\n[ 本帖最后由 东方蜘蛛 于 2006-9-8 09:50 编辑 ]

东方蜘蛛

晕，看来脑子摔坏了，连命令都记不住了，前面的那个命令是vxdiskadm，如果上面操作不行，就选4选5再做一次！

mjxyx

不行哦,没有能运行.\r\n#vxdisksetup\r\nUsage:vxdisksetup [-ie] disk-device-address [attribute ....]\r\nFor detailed help use:vxdisksetup -h\r\n\r\n是不是需要加磁盘名字?

mjxyx

VXDISKADM可以进去了,选5是:replace a failed or removed disk\r\n                                    选6是：Mirror volumes on a disk

mjxyx

选3是：remove a disk \r\n选4是：remove a disk for replacement

东方蜘蛛

原帖由 mjxyx 于 2006-9-8 09:59 发表\r\n选3是：remove a disk \r\n选4是：remove a disk for replacement

\r\n\r\n\r\n没明白我的意思啊？

mjxyx

Select an operation to perform: 5\r\n\r\n\r\nReplace a failed or removed disk\r\nMenu: VolumeManager/Disk/ReplaceDisk\r\n\r\n  Use this menu operation to specify a replacement disk for a disk\r\n  that you removed with the \"Remove a disk for replacement\" menu\r\n  operation, or that failed during use.  You will be prompted for\r\n  a disk name to replace and a disk device to use as a replacement.\r\n  You can choose an uninitialized disk, in which case the disk will\r\n  be initialized, or you can choose a disk that you have already\r\n  initialized using the Add or initialize a disk menu operation.\r\n\r\nSelect a removed or failed disk [<disk>,list,q,?] list\r\n.......\r\nSelect a removed or failed disk [<disk>,list,q,?] Disk_1\r\n\r\nSelect disk device to initialize [<address>,list,q,?] list\r\n\r\nSelect disk device to initialize [<address>,list,q,?] c1t1d0\r\n\r\nThe following device disk  has already been added to a disk group.\r\nthis disk will be ignored.\r\noutput format:[Device_Name,Disk_Access_Name,Disk_Group]\r\n\r\n[c1t1d0,c1t1d0s2,rootdg]\r\n\r\nHit RETURN to continue .\r\n\r\n与你显示的信息不一样，请问是不是盘这样已存在了？接下来如何处理？