怎么确定自己的BIND的版本号啊？

满天飞小猪

看精华帖说：\r\n首先运行/usr/sbin/in.named ,若没有配置好，则会出现如下出借信息：can\'t open \'/etc/named.conf\'，再运行/usr/sbin/in.named –v 看一下bind的版本号\r\n\r\n可是，我这台S8里面怎么在 /usr/sbin/in.named  后面没有-V的这个参数啊？ 只有 -d#  -q  -r -f -p port -b -c configtile 这几个参数啊~

满天飞小猪

原帖由 满天飞小猪 于 2007-1-24 22:11 发表\r\n看精华帖说：\r\n首先运行/usr/sbin/in.named ,若没有配置好，则会出现如下出借信息：can\'t open \'/etc/named.conf\'，再运行/usr/sbin/in.named –v 看一下bind的版本号\r\n\r\n可是，我这台S8里面怎么在 /usr/sbin/in. ...

\r\n\r\n按道理说应该是缺省安装的8的版本吧~~~~不过也很想知道怎么偶这里没这个命令参数？还是偶根本就没安装BIND？

yuhuohu

/usr/sbin/named -v 看看咯

满天飞小猪

原帖由 yuhuohu 于 2007-1-24 22:16 发表\r\n/usr/sbin/named -v 看看咯

\r\n\r\n就是说偶这个命令下，没有v这个参数啊~~~~

briangao

If the service is already started, you should be able to see the version of your BIND service in /var/adm/messages file.\r\nTry: grep BIND /var/adm/messages

满天飞小猪

我还没有启动DNS服务器，我是想先知道我的bind的版本，grep BIND /var/adm/messages \r\n\r\n\r\n没反映啊

briangao

我还没有启动DNS服务器，我是想先知道我的bind的版本，grep BIND /var/adm/messages \r\n\r\n\r\n没反映啊

\r\nCan you try to start it and grep BIND from /var/adm/messages? It won\'t hurt if it is not configured.

满天飞小猪

Can you try to start it \r\n\r\n运行/usr/sbin/in.named ,出现如下出借信息：can\'t open \'/etc/named.conf\'

briangao

Even it failed, you should still see a message in /var/adm/messages file such as \r\n

1. Jan 19 13:01:12 serv1 named[4766]: [ID 295310 daemon.notice] starting (/etc/named.conf).  in.named BIND 8.2.4 Fri May 19 04:41:53 PDT 2006

复制代码

\r\n\r\nAnd it is also very weird that you don\'t have -v option (did you use -V or -v?)  \r\n/usr/sbin/in.named should be a symbolic link to /usr/sbin/named. You can verify it by ls -l /usr/sbin/in.named and if you do man named (pls post the few lines here), you should see an -v option.

满天飞小猪

原帖由 briangao 于 2007-1-25 02:07 发表\r\nEven it failed, you should still see a message in /var/adm/messages file such as \r\n[code]Jan 19 13:01:12 serv1 named[4766]: [ID 295310 daemon.notice] starting (/etc/named.conf).  in.named BIND 8.2. ...

\r\n\r\n\r\n谢谢，在messages 里看到了，8.1.2   另外  ~~~~ -V 和 -v 我都试了，超级奇怪呢，就是没有这个参数~~\n\n[ 本帖最后由 满天飞小猪 于 2007-1-25 03:50 编辑 ]