- 论坛徽章:
- 0
|
1、A customer has cloned a machine via mksysb. The source machine contained a gaphics adaptor and display and was runniing Xwindows.The target machine has a IBM 3151 terminal and no graphics capability. The customer states that they are seeing the message below repeatedly scroll across the login screen.To
prevent this message from appearing,which of the following actions should be take
?*****************************************************************************
*******Starting Desktop Login on display:0?**wait for the Desktop Loing screen before login in. ******************
A.Run the cdecfg -disable command.
B.Run the startx -no command and reboot.
C.Run the dtconfig -d command and reboot.
D.Remove the X=start line form the /etc/security/login.cfg file and reboot.
Answer:A
2.The qdaemon subsystem is not running. What command can be used to start it?
A.telinit q
B.init -s qdaemon
C.refresh -s qdaemon
D.startsrc -s qdaemon
Answer:C
3、After installing fileset updates to upgrade the system from 4.3.2 to 4.3.3,the "oslevel" command still reports the oslevel to be "4.3.2.0".What can be done to determine which filesets still need to be upgraded so the oslevel command will report"4.3.3.0"?
A.lppchk -v
B.oslevel -l 4.3.3.0
C.installp -l 4.3.3.0
D.instfix -q -l 4.3.3.0
Answer:A
4、A system administrator's daily monitoring has revealed a failing disk drive. Where would this information be revealed?
A.lspv
B.errpt
C.syslog
D./var/adm/messages
Answer:C
5、The system administrator has just finished upgrading a system to AIX5.1.0. In case there are future problems,the system administrator would like to add an entry to the AIX errorlog recording this event. What command can be issued to accomplish this?
A./usr/bin/errmsg"System upgraded to AIX 5.1.0"
B./userbin/errlog"..."
C./usr/bin/errupdate"..."
D./usr/bin/errlogger"..."
Answer:C
6、To correct a networking issue,a fix needs to be applied to a server running AIX.What command can be used to list all of the fixes that can be installed on this platform from a fix CD-ROM?
A.lslpp -T -l -d/dev/cd0
B.instfix -T -d/dev/cd0
C.listfix -l -d/dev/cd0
D.installp -T -l -d/dev/cd0
Answer:B
7、A daemon pogram named"dbupdater" runs under the user"dbrun".It needs to have the evironment variable "RECOVERY=YES"defined when it initializes for the
first time.Where should this environment variable be defined?
A.In the /home/dbrun/.profile file
B.In the /.profile file
C.In the /etc/.profile file
D.In the /etc/security/environment file
Answer:B
8、A system administrator's daily monitoring has revealed a failing disk drive. The drive that is failing,hdisk0,is a lvm mirrored drive. What is the first step that should be taken in order to physically replace this drive?
A.Remove the physical volume from the system.
B.Remove the physical volume from the volume group.
C.Remove the physical partitions from the volume group.
D.Remove the logical volume copies from the failing drive.
Answer:C
9、A system administrator would like to list all paging spaces residing on the server.What is the correct syntax of the command in order to accomplish this?
A.lsps -a
B.lsps -s
C.lsps -l
D.lsps -d
Answer:B
10、A pSeries server is being used as a file server and all data is stored on a non-root volume group and resides on filesystems.Which of the following is the quickest way to backup all of the data and filesystem definitions?
A.tar
B.cpio
C.savefs
D.savevg
Answer:B
11、This default order in resolving host name is
(a)BIND/DNS
(b)NIS
(c)Local /etc/hosts file
This default can be overwritten by creating a file and specifying the desired order. which of the following files need to be modified?
A./etc/hosts
B./etc/resolv.conf
C./etc/netsvc.conf
D./etc/defaultorder
Answer:B
谢谢! |
|