sun firev210，忘了alom密码，求助

zhmzhouming

erial line login timeout, returns to console stream.\r\n\r\nEnter #. to return to ALOM.\r\n\r\n你之前的这个已经是切换到了console的标志了啊，这个时候你不要按#.，而是按一下回车。

solaris_unix

我觉得最好的办法就是先把硬件故障排除，然后把系统起来，在系统里重新设置alom的admin账户的密码。\r\n首先，检测硬件故障不需要sc也能进console，把电源线插上后，不要做任何操作，包括敲终端控制台的\r\n键盘，到sc的login时，也不要敲键盘，等一分钟后，sc自己就会退到console上：\r\nSerial line login timeout, returns to console stream.\r\n\r\nEnter #. to return to ALOM\r\n\r\n出现这个提示，就表示已经退到console上了，这是可以把前面的钥匙拧到诊断位置，运行post，一般来说\r\n，硬件故障能查出来，换掉坏的硬件，把系统起来，在系统里重新设置admin的密码：\r\n\r\n# cd /usr/platform/`uname -i`/sbin\r\n# ./scadm userpassword admin\r\n输入admin新的密码，就可以登录sc了！

zircal

login system with root account.\r\n\r\n\r\n/usr/platform/SUNW,Sun-Fire-V240/scadm help\r\n\r\n/usr/platform/SUNW,Sun-Fire-V240/scadm userpassword admin #to reset your admina ccount password

yuio654

ok obdiag\r\nSearching for selftest methods: network network flashprom rtc i2c serial serial rmc-comm ide scsi scsi network network SUNW,m64B \r\n _____________________________________________________________________________\r\n|                                 o b d i a g                                 |\r\n|_________________________ _________________________ _________________________|\r\n|                         |                         |                         |\r\n|  1 SUNW,m64B@1          |  2 flashprom@2,0        |  3 i2c@0,320            |\r\n|  4 ide@d                |  5 network@2            |  6 network@2            |\r\n|  7 network@2,1          |  8 network@2,1          |  9 rmc-comm@0,3e8       |\r\n| 10 rtc@0,70             | 11 scsi@2               | 12 scsi@2,1             |\r\n| 13 serial@0,2e8         | 14 serial@0,3f8         |                         |\r\n|_________________________|_________________________|_________________________|\r\n|       Commands: test test-all except help what setenv set-default exit      |\r\n|_____________________________________________________________________________|\r\n|                   diag-passes=1 diag-level=max test-args=                   |\r\n|_____________________________________________________________________________|\r\n\r\nobdiag> test-all\r\nHit the spacebar to interrupt testing\r\nTesting /pci@1d,700000/SUNW,m64B@1 \r\nDisplay not installed\r\n\r\nTest hardware registers -  passed Ok\r\nTest RamDAC -  passed Ok\r\nTest Frame buffer -  passed Ok\r\n.................................... passed\r\nTesting /pci@1e,600000/isa@7/flashprom@2,0 ............................ passed\r\nTesting /pci@1e,600000/isa@7/i2c@0,320 ................................ passed\r\nTesting /pci@1e,600000/ide@d .......................................... passed\r\nTesting /pci@1f,700000/network@2 ...................................... passed\r\nTesting /pci@1d,700000/network@2 ...................................... passed\r\nTesting /pci@1f,700000/network@2,1 .................................... passed\r\nTesting /pci@1d,700000/network@2,1 .................................... passed\r\nTesting /pci@1e,600000/isa@7/rmc-comm@0,3e8 ........................... passed\r\nTesting /pci@1e,600000/isa@7/rtc@0,70 ................................. passed\r\nTesting /pci@1c,600000/scsi@2 ......................................... passed\r\nTesting /pci@1c,600000/scsi@2,1 ....................................... passed\r\nTesting /pci@1e,600000/isa@7/serial@0,2e8 ............................. passed\r\nTesting /pci@1e,600000/isa@7/serial@0,3f8 ............................. passed\r\nPass:1 (of 1) Errors:0 (of 0) Tests Failed:0 Elapsed Time: 0:0:0:30\r\n\r\n\r\nHit any key to return to the main menu

yuio654

先去ok下boot cdrom试试看排除硬件故障。一会给大家通报结果……\r\n\r\n 找不到solaris的盘了，正在下载……\n\n[ 本帖最后由 yuio654 于 2009-7-27 16:47 编辑 ]

gyokuho

建议设置 diag-passes=30 ，再做一次 obdiag 。\r\n\r\n然后目视检查 DIMM，看看是不是相同规格的。\r\n\r\n0>CPU0 MB/P0/B0/D0:\r\n0>Part#:  M3 12L3223DT0-CA2   Serial#:  410dbac7  Date Code:  0326  Rev#:  3044\r\n0>CPU0 MB/P0/B0/D1:\r\n0>Part#:  M3 12L3223DT0-CA2   Serial#:  4105babf  Date Code:  0326  Rev#:  3044\r\n0>CPU0 MB/P0/B1/D0:\r\n0>Part#:  72D32501GR7A        Serial#:  074d6a91  Date Code:  0327  Rev#:  020a\r\n0>CPU0 MB/P0/B1/D1:\r\n0>Part#:  72D32501GR7A        Serial#:  074d60db  Date Code:  0327  Rev#:  020a\n\n[ 本帖最后由 gyokuho 于 2009-7-27 22:01 编辑 ]

yuio654

问题已解决，今天重启机器竟然起来了，赶紧scadm修改密码，其他sun的机器顺便也赶紧都改了下密码，省的到时候麻烦\r\n\r\n启动发现文件系统应该是有点问题\r\n\r\nBoot device: disk  File and args:                                     \r\nLoading ufs-file-system package 1.4 04 Aug 1995 13:02:54. \r\nFCode UFS Reader 1.12 00/07/17 15:48:16. \r\nLoading: /platform/SUNW,Sun-Fire-V210/ufsboot\r\nLoading: /platform/sun4u/ufsboot\r\nSunOS Release 5.10 Version Generic 64-bit\r\nCopyright 1983-2005 Sun Microsystems, Inc.  All rights reserved.\r\nUse is subject to license terms.\r\nHardware watchdog enabled\r\nSC unretrieved msg JUL 27 06:57:01 2009 UTC [SC System booted.]\r\nHostname: sasuke\r\nNIS domain name is qilinsoftcorp.qilinsoft.com\r\nchecking ufs filesystems\r\nCan\'t stat /dev/rdsk/c1t1d0s7\r\n/dev/rdsk/c1t1d0s7: CAN\'T CHECK FILE SYSTEM.\r\n/dev/rdsk/c1t1d0s7: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.\r\nfsckall failed with exit code 1.\r\n\r\nWARNING - Unable to repair one or more filesystems.\r\nRun fsck manually (fsck filesystem...).\r\n\r\n正在fsck，但是发现fsck好像只检查不修复。晕。正在查资料\r\n\r\nbash-3.00# fsck /export\r\n** /dev/rdsk/c1t5d0s7\r\n** Last Mounted on /export\r\n** Phase 1 - Check Blocks and Sizes\r\n** Phase 2 - Check Pathnames\r\n** Phase 3 - Check Connectivity\r\n** Phase 4 - Check Reference Counts\r\n** Phase 5 - Check Cyl groups\r\n311781 files, 29952739 used, 2977475 free (365211 frags, 326533 blocks, 1.1% fragmentation)\r\nbash-3.00# \r\n\r\n\r\nbash-3.00# fsck /dev/rdsk/c1t5d0s7\r\n** /dev/rdsk/c1t5d0s7\r\n** Last Mounted on /export\r\n** Phase 1 - Check Blocks and Sizes\r\n** Phase 2 - Check Pathnames\r\n** Phase 3 - Check Connectivity\r\n** Phase 4 - Check Reference Counts\r\n** Phase 5 - Check Cyl groups\r\n311781 files, 29952739 used, 2977475 free (365211 frags, 326533 blocks, 1.1% fragmentation)\r\nbash-3.00#\r\n每次就这么就结束了。再次感谢大家的热心帮助……:wink:\n\n[ 本帖最后由 yuio654 于 2009-7-28 13:18 编辑 ]

easybegin

fsck -y可以修复，不过建议去单用户做

WindowsNT

文件系统正常的情况下确实不会修复。。。

wstar

fsck 最好在单用户下面做。