netbackup中的retention_level问题

neatcat

备份的时候出现it is not the correct retention_level，如何解决？\r\n\r\n是否能够改磁带的it is not the correct retention_level呢？\r\n\r\n000006磁带的ret是4，我想改成3，如何做？谢谢。\r\n\r\nroot@adat # bpmedialist -L -ev 000006\r\nServer Host = adat\r\n\r\nmedia_id = 000006, partner_id = *NULL*, version = 1\r\ndensity = hcart (6)\r\nallocated = 09/05/2006 11:42:36 (1157449356)\r\nlast_written = 09/05/2006 11:59:31 (1157450371)\r\nexpiration = 11/06/2006 10:59:31 (1162807171)\r\nlast_read = N.A (0)\r\nkbytes = 17072288, nimages = 13, vimages = 13\r\nretention_level = 4, num_restores = 0\r\nstatus = 0x0, l_offset = 133415, psize = 0, hsize = 1024, ssize = 0\r\nvmpool = 2\r\nres1 = 0, res2 = 0, res3 = 0, res4 = 0\r\n\r\nroot@adat # bpmedialist -L -ev 000007\r\nServer Host = adat\r\n\r\nmedia_id = 000007, partner_id = *NULL*, version = 1\r\ndensity = hcart (6)\r\nallocated = 09/05/2006 14:46:34 (1157460394)\r\nlast_written = 09/06/2006 15:53:33 (1157550813)\r\nexpiration = 10/07/2006 15:53:33 (1160229213)\r\nlast_read = N.A (0)\r\nkbytes = 34296128, nimages = 26, vimages = 26\r\nretention_level = 3, num_restores = 0\r\nstatus = 0x0, l_offset = 268012, psize = 0, hsize = 1024, ssize = 0\r\nvmpool = 4\r\nres1 = 0, res2 = 0, res3 = 0, res4 = 0

neatcat

知道了，先用bpexpdate -m 000006 -d 0把磁带过期，然后再备份一次就行了。\r\n\r\nroot@adat # bpmedialist -L -ev 000006\r\nServer Host = adat\r\n\r\nmedia_id = 000006, partner_id = *NULL*, version = 1\r\ndensity = hcart (6)\r\nallocated = 09/12/2006 10:41:11 (1158050471)\r\nlast_written = 09/12/2006 10:44:11 (1158050651)\r\nexpiration = 10/13/2006 10:44:11 (1160729051)\r\nlast_read = N.A (0)\r\nkbytes = 2969632, nimages = 1, vimages = 1\r\nretention_level = 3, num_restores = 0\r\nstatus = 0x0, l_offset = 23205, psize = 0, hsize = 1024, ssize = 0\r\nvmpool = 2\r\nres1 = 0, res2 = 0, res3 = 0, res4 = 0

neatcat

原帖由 sqmax 于 2006-9-12 11:21 发表\r\n恩,LZ很厚道啊!

\r\n\r\n还是老乡说话好听呀！