免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 3763 | 回复: 8

NBU 5.0 备份数据到remote media server的硬盘空间故障求教. [复制链接]

论坛徽章:
0
发表于 2007-01-11 23:50 |显示全部楼层
master server: NBU enterprise 5.0 win2000 sp4 己安装到最新MP7补丁\r\nremote media server:NBU 5.0 win2000 sp4,己安装到最新的MP7\r\nclient:   aix 5.2 NBU 5.0\r\n\r\n在master上新建storage unit,指定remote media server名字,选择类型为disk,选择在remote media server上备份的相应磁盘路径\r\n在master上新建policy,指定备份客户端为aix,指定备份相应的文件系统,备份的设备选择刚才新建的remote media server上的storage unit\r\n\r\n备份时报错信息如下:\r\n“2006-12-26 4:45:57 - started process bpbrm (2124)\r\n2006-12-26 4:45:57 - connecting\r\n2006-12-26 4:45:57 - connected; connect time: 00:00:00\r\n2006-12-26 4:46:02 - end writing\r\nnetwork read failed(42)\r\n2006-12-26 4:46:02 - Error bpsched(pid=1432) suspending further backup attempts for client scjz-R520, policy test, schedule Full because it has exceeded the configured number of tries\r\n2006-12-26 4:46:02 - Error bpsched(pid=1432) backup of client jz-R520 exited with status 42 (network read failed)“\r\n\r\n在master上修改相应的try参数和timeout参数,还是报同样的network read failed错误\r\nmaster和media server上的进程都改为了administrator启动\r\nmaster和media server之间网络没有防火墙和端口过滤\r\nmedia server上的软件己经重新安装并配置\r\n备份client的文件系统到master的本地磁盘和磁带库正常\r\nhosts文件的名字解析都仔细检查过,没有问题\r\n\r\n但始终报network read failed的错误,请各位老大帮我看看,是哪儿出的问题,非常感谢\r\n\r\n下面是NBU 5.0 的logs 信息:\r\n“04:14:21.968 [1992.1852] <2> logconnections: BPCD ACCEPT FROM 10.0.1.78.988 TO 10.0.1.78.13782\r\n04:14:21.968 [1992.1852] <2> bpcd main: setup_sockopts complete\r\n04:14:21.984 [1992.1852] <2> bpcd peer_hostname: Connection from host jz-t630 (10.0.1.7 port 988\r\n04:14:22.000 [1992.1852] <2> bpcd valid_server: comparing jz-t630 and jz-t630\r\n04:14:22.000 [1992.1852] <4> bpcd valid_server: hostname comparison succeeded\r\n04:14:22.000 [1992.1852] <2> bpcd main: output socket port number = 891\r\n04:14:22.000 [1992.1852] <2> bpcd peer_hostname: Connection from host jz-t630 (10.0.1.7 port 988\r\n04:14:22.000 [1992.1852] <2> bpcd main: Peer hostname is jz-t630\r\n04:14:22.000 [1992.1852] <2> bpcd main: Got socket for output 700, lport = 907\r\n04:14:22.000 [1992.1852] <2> bpcd main: Connected on output socket\r\n04:14:22.000 [1992.1852] <2> bpcd main: Duplicated socket on stderr\r\n04:14:22.000 [1992.1852] <2> bpcd main: <---- NetBackup 5.0GA 0 ------------initiated\r\n04:14:22.000 [1992.1852] <2> bpcd main: Not using VxSS authentication with scjz-t630\r\n04:14:22.000 [1992.1852] <2> bpcd main: BPCD_HOSTNAME_RQST\r\n04:14:22.000 [1992.1852] <2> bpcd main: BPCD_DISCONNECT_RQST\r\n04:14:22.000 [1992.1852] <2> bpcd exit_bpcd: exit status 0  ----------->exiting\r\n04:14:53.031 [2064.420] <2> bpcd main: offset to GMT -28800\r\n04:14:53.031 [2064.420] <2> bpcd main: Got socket for input 472\r\n04:14:53.031 [2064.420] <2> logconnections: BPCD ACCEPT FROM 10.0.1.78.717 TO 10.0.1.78.13782\r\n04:14:53.031 [2064.420] <2> bpcd main: setup_sockopts complete\r\n04:14:53.046 [2064.420] <2> bpcd peer_hostname: Connection from host jz-t630 (10.0.1.7 port 717\r\n04:14:53.062 [2064.420] <2> bpcd valid_server: comparing jz-t630 and jz-t630\r\n04:14:53.062 [2064.420] <4> bpcd valid_server: hostname comparison succeeded\r\n04:14:53.062 [2064.420] <2> bpcd main: output socket port number = 579\r\n04:14:53.062 [2064.420] <2> bpcd peer_hostname: Connection from host jz-t630 (10.0.1.7 port 717\r\n04:14:53.062 [2064.420] <2> bpcd main: Peer hostname is jz-t630\r\n04:14:53.062 [2064.420] <2> bpcd main: Got socket for output 700, lport = 756\r\n04:14:53.062 [2064.420] <2> bpcd main: Connected on output socket\r\n04:14:53.062 [2064.420] <2> bpcd main: Duplicated socket on stderr\r\n04:14:53.062 [2064.420] <2> bpcd main: <---- NetBackup 5.0GA 0 ------------initiated\r\n04:14:53.062 [2064.420] <2> bpcd main: Not using VxSS authentication with jz-t630\r\n04:14:53.062 [2064.420] <2> bpcd main: BPCD_FORK_CMD_RQST\r\n04:14:53.062 [2064.420] <2> bpcd main: fork cmd = /usr/openv/netbackup/bin/bptm bptm -count -cmd -rt 8 -rn 0 -stunit jz-t630-hcart-robot-tld-0 -den 6 -mt 2 -masterversion 500000\r\n04:14:53.062 [2064.420] <2> bpcd main: Convert args to CreateProcess format\r\n04:14:53.062 [2064.420] <2> bpcd main: Done converting args to CreateProcess format\r\n04:14:53.062 [2064.420] <2> bpcd main: new fork cmd = C:\\Program Files\\VERITAS\\NetBackup\\bin\\bptm.exe -count -cmd -rt 8 -rn 0 -stunit jz-t630-hcart-robot-tld-0 -den 6 -mt 2 -masterversion 500000 \r\n04:14:53.062 [2064.420] <2> bpcd main: Before CreateProcess\r\n04:14:53.062 [2064.420] <2> bpcd main: StdOutput assigned the value STDOUTSOCK\r\n04:14:53.062 [2064.420] <2> bpcd main: After CreateProcess, pid = 1900\r\n04:14:53.062 [2064.420] <2> bpcd exit_bpcd: exit status 0  ----------->exiting\r\n04:14:53.234 [2064.948] <2> bpcd main: offset to GMT -28800\r\n04:14:53.234 [2064.948] <2> bpcd main: Got socket for input 500\r\n04:14:53.234 [2064.948] <2> logconnections: BPCD ACCEPT FROM 10.0.1.78.795 TO 10.0.1.78.13782\r\n04:14:53.234 [2064.948] <2> bpcd main: setup_sockopts complete\r\n04:14:53.265 [2064.948] <2> bpcd peer_hostname: Connection from host jz-t630 (10.0.1.7 port 795\r\n04:14:53.265 [2064.948] <2> bpcd valid_server: comparing jz-t630 and jz-t630\r\n04:14:53.265 [2064.948] <4> bpcd valid_server: hostname comparison succeeded\r\n04:14:53.265 [2064.948] <2> bpcd main: output socket port number = 793\r\n04:14:53.265 [2064.948] <2> bpcd peer_hostname: Connection from host jz-t630 (10.0.1.7 port 795\r\n04:14:53.265 [2064.948] <2> bpcd main: Peer hostname is jz-t630\r\n04:14:53.265 [2064.948] <2> bpcd main: Got socket for output 700, lport = 904\r\n04:14:53.265 [2064.948] <2> bpcd main: Connected on output socket\r\n04:14:53.265 [2064.948] <2> bpcd main: Duplicated socket on stderr\r\n04:14:53.265 [2064.948] <2> bpcd main: <---- NetBackup 5.0GA 0 ------------initiated\r\n04:14:53.265 [2064.948] <2> bpcd main: Not using VxSS authentication with scjz-t630\r\n04:14:53.265 [2064.948] <2> bpcd main: BPCD_HOSTNAME_RQST\r\n04:14:53.281 [2064.948] <2> bpcd main: BPCD_DISCONNECT_RQST\r\n04:14:53.281 [2064.948] <2> bpcd exit_bpcd: exit status 0  ----------->exiting\r\n04:15:03.859 [1920.448] <2> bpcd main: offset to GMT -28800\r\n04:15:03.859 [1920.448] <2> bpcd main: Got socket for input 500\r\n04:15:03.859 [1920.448] <2> logconnections: BPCD ACCEPT FROM 10.0.1.78.951 TO 10.0.1.78.13782\r\n04:15:03.859 [1920.448] <2> bpcd main: setup_sockopts complete\r\n04:15:03.875 [1920.448] <2> bpcd peer_hostname: Connection from host jz-t630 (10.0.1.7 port 951\r\n04:15:03.875 [1920.448] <2> bpcd valid_server: comparing jz-t630 and jz-t630\r\n04:15:03.875 [1920.448] <4> bpcd valid_server: hostname comparison succeeded\r\n04:15:03.890 [1920.448] <2> bpcd main: output socket port number = 598\r\n04:15:03.890 [1920.448] <2> bpcd peer_hostname: Connection from host jz-t630 (10.0.1.7 port 951\r\n04:15:03.890 [1920.448] <2> bpcd main: Peer hostname is jz-t630\r\n04:15:03.890 [1920.448] <2> bpcd main: Got socket for output 700, lport = 519\r\n04:15:03.890 [1920.448] <2> bpcd main: Connected on output socket\r\n04:15:03.890 [1920.448] <2> bpcd main: Duplicated socket on stderr\r\n04:15:03.890 [1920.448] <2> bpcd main: <---- NetBackup 5.0GA 0 ------------initiated\r\n04:15:03.890 [1920.448] <2> bpcd main: Not using VxSS authentication with jz-t630\r\n04:15:03.890 [1920.448] <2> bpcd main: BPCD_FORK_CMD_RQST\r\n04:15:03.890 [1920.448] <2> bpcd main: fork cmd = /usr/openv/netbackup/bin/bptm bptm -count -cmd -rt 8 -rn 0 -stunit jz-t630-hcart-robot-tld-0 -den 6 -mt 2 -masterversion 500000\r\n04:15:03.890 [1920.448] <2> bpcd main: Convert args to CreateProcess format\r\n04:15:03.890 [1920.448] <2> bpcd main: Done converting args to CreateProcess format\r\n04:15:03.890 [1920.448] <2> bpcd main: new fork cmd = C:\\Program Files\\VERITAS\\NetBackup\\bin\\bptm.exe -count -cmd -rt 8 -rn 0 -stunit jz-t630-hcart-robot-tld-0 -den 6 -mt 2 -masterversion 500000 \r\n04:15:03.890 [1920.448] <2> bpcd main: Before CreateProcess\r\n04:15:03.890 [1920.448] <2> bpcd main: StdOutput assigned the value STDOUTSOCK\r\n04:15:03.890 [1920.448] <2> bpcd main: After CreateProcess, pid = 1348\r\n04:15:03.890 [1920.448] <2> bpcd exit_bpcd: exit status 0  ----------->exiting\r\n04:15:15.453 [628.1672] <2> bpcd main: offset to GMT -28800\r\n04:15:15.453 [628.1672] <2> bpcd main: Got socket for input 532\r\n04:15:15.453 [628.1672] <2> logconnections: BPCD ACCEPT FROM 10.0.1.78.934 TO 10.0.1.78.13782\r\n04:15:15.453 [628.1672] <2> bpcd main: setup_sockopts complete\r\n04:15:15.468 [628.1672] <2> bpcd peer_hostname: Connection from host jz-t630 (10.0.1.7 port 934\r\n04:15:15.484 [628.1672] <2> bpcd valid_server: comparing jz-t630 and jz-t630\r\n04:15:15.484 [628.1672] <4> bpcd valid_server: hostname comparison succeeded\r\n04:15:15.484 [628.1672] <2> bpcd main: output socket port number = 874\r\n04:15:15.484 [628.1672] <2> bpcd peer_hostname: Connection from host jz-t630 (10.0.1.7 port 934\r\n04:15:15.484 [628.1672] <2> bpcd main: Peer hostname is jz-t630\r\n04:15:15.484 [628.1672] <2> bpcd main: Got socket for output 700, lport = 916\r\n04:15:15.484 [628.1672] <2> bpcd main: Connected on output socket\r\n04:15:15.484 [628.1672] <2> bpcd main: Duplicated socket on stderr\r\n04:15:15.484 [628.1672] <2> bpcd main: <---- NetBackup 5.0GA 0 ------------initiated\r\n04:15:15.484 [628.1672] <2> bpcd main: Not using VxSS authentication with jz-t630\r\n04:15:15.484 [628.1672] <2> bpcd main: BPCD_FORK_CMD_RQST\r\n04:15:15.484 [628.1672] <2> bpcd main: fork cmd = /usr/openv/netbackup/bin/bptm bptm -count -cmd -rt 8 -rn 0 -stunit jz-t630-hcart-robot-tld-0 -den 6 -mt 2 -masterversion 500000\r\n04:15:15.484 [628.1672] <2> bpcd main: Convert args to CreateProcess format\r\n04:15:15.484 [628.1672] <2> bpcd main: Done converting args to CreateProcess format\r\n04:15:15.484 [628.1672] <2> bpcd main: new fork cmd = C:\\Program Files\\VERITAS\\NetBackup\\bin\\bptm.exe -count -cmd -rt 8 -rn 0 -stunit jz-t630-hcart-robot-tld-0 -den 6 -mt 2 -masterversion 500000 \r\n04:15:15.484 [628.1672] <2> bpcd main: Before CreateProcess\r\n04:15:15.484 [628.1672] <2> bpcd main: StdOutput assigned the value STDOUTSOCK\r\n04:15:15.484 [628.1672] <2> bpcd main: After CreateProcess, pid = 240\r\n04:15:15.484 [628.1672] <2> bpcd exit_bpcd: exit status 0  ----------->exiting\r\n04:15:21.687 [1880.1672] <2> bpcd main: offset to GMT -28800\r\n04:15:21.687 [1880.1672] <2> bpcd main: Got socket for input 528\r\n04:15:21.687 [1880.1672] <2> logconnections: BPCD ACCEPT FROM 10.0.1.78.737 TO 10.0.1.78.13782\r\n04:15:21.687 [1880.1672] <2> bpcd main: setup_sockopts complete\r\n04:15:21.718 [1880.1672] <2> bpcd peer_hostname: Connection from host jz-t630 (10.0.1.78) port 737\r\n04:15:21.718 [1880.1672] <2> bpcd valid_server: comparing jz-t630 and jz-t630\r\n04:15:21.718 [1880.1672] <4> bpcd valid_server: hostname comparison succeeded\r\n04:15:21.718 [1880.1672] <2> bpcd main: output socket port number = 797\r\n04:15:21.718 [1880.1672] <2> bpcd peer_hostname: Connection from host jz-t630 (10.0.1.78) port 737\r\n04:15:21.718 [1880.1672] <2> bpcd main: Peer hostname is jz-t630\r\n04:15:21.718 [1880.1672] <2> bpcd main: Got socket for output 700, lport = 860\r\n04:15:21.718 [1880.1672] <2> bpcd main: Connected on output socket\r\n04:15:21.718 [1880.1672] <2> bpcd main: Duplicated socket on stderr\r\n04:15:21.718 [1880.1672] <2> bpcd main: <---- NetBackup 5.0GA 0 ------------initiated\r\n04:15:21.718 [1880.1672] <2> bpcd main: Not using VxSS authentication with scjz-t630\r\n04:15:21.734 [1880.1672] <2> bpcd main: BPCD_HOSTNAME_RQST\r\n04:15:21.734 [1880.1672] <2> bpcd main: BPCD_DISCONNECT_RQST\r\n04:15:21.734 [1880.1672] <2> bpcd exit_bpcd: exit status 0  ----------->exiting\r\n04:15:27.375 [1468.1852] <2> bpcd main: offset to GMT -28800\r\n04:15:27.375 [1468.1852] <2> bpcd main: Got socket for input 512\r\n04:15:27.375 [1468.1852] <2> logconnections: BPCD ACCEPT FROM 10.0.1.78.922 TO 10.0.1.78.13782\r\n04:15:27.375 [1468.1852] <2> bpcd main: setup_sockopts complete\r\n04:15:27.390 [1468.1852] <2> bpcd peer_hostname: Connection from host jz-t630 (10.0.1.78) port 922\r\n04:15:27.406 [1468.1852] <2> bpcd valid_server: comparing jz-t630 and jz-t630\r\n04:15:27.406 [1468.1852] <4> bpcd valid_server: hostname comparison succeeded\r\n04:15:27.406 [1468.1852] <2> bpcd main: output socket port number = 788\r\n04:15:27.406 [1468.1852] <2> bpcd peer_hostname: Connection from host jz-t630 (10.0.1.78) port 922\r\n04:15:27.406 [1468.1852] <2> bpcd main: Peer hostname is jz-t630\r\n04:15:27.406 [1468.1852] <2> bpcd main: Got socket for output 700, lport = 534\r\n04:15:27.406 [1468.1852] <2> bpcd main: Connected on output socket\r\n04:15:27.406 [1468.1852] <2> bpcd main: Duplicated socket on stderr\r\n04:15:27.406 [1468.1852] <2> bpcd main: <---- NetBackup 5.0GA 0 ------------initiated\r\n04:15:27.406 [1468.1852] <2> bpcd main: Not using VxSS authentication with scjz-t630\r\n04:15:27.406 [1468.1852] <2> bpcd main: BPCD_HOSTNAME_RQST\r\n04:15:27.406 [1468.1852] <2> bpcd main: BPCD_DISCONNECT_RQST\r\n04:15:27.406 [1468.1852] <2> bpcd exit_bpcd: exit status 0  ----------->exiting\r\n04:15:28.343 [1656.1852] <2> bpcd main: offset to GMT -28800\r\n04:15:28.343 [1656.1852] <2> bpcd main: Got socket for input 472\r\n04:15:28.343 [1656.1852] <2> logconnections: BPCD ACCEPT FROM 10.0.1.78.559 TO 10.0.1.78.13782\r\n04:15:28.343 [1656.1852] <2> bpcd main: setup_sockopts complete\r\n04:15:28.375 [1656.1852] <2> bpcd peer_hostname: Connection from host jz-t630 (10.0.1.78) port 559\r\n04:15:28.375 [1656.1852] <2> bpcd valid_server: comparing jz-t630 and jz-t630\r\n04:15:28.375 [1656.1852] <4> bpcd valid_server: hostname comparison succeeded\r\n04:15:28.375 [1656.1852] <2> bpcd main: output socket port number = 715\r\n04:15:28.375 [1656.1852] <2> bpcd peer_hostname: Connection from host jz-t630 (10.0.1.78) port 559\r\n04:15:28.375 [1656.1852] <2> bpcd main: Peer hostname is jz-t630\r\n04:15:28.375 [1656.1852] <2> bpcd main: Got socket for output 700, lport = 513\r\n04:15:28.375 [1656.1852] <2> bpcd main: Connected on output socket\r\n04:15:28.375 [1656.1852] <2> bpcd main: Duplicated socket on stderr\r\n04:15:28.375 [1656.1852] <2> bpcd main: <---- NetBackup 5.0GA 0 ------------initiated\r\n04:15:28.375 [1656.1852] <2> bpcd main: Not using VxSS authentication with jz-t630\r\n04:15:28.375 [1656.1852] <2> bpcd main: BPCD_IMMED_CMD_RQST\r\n04:15:28.375 [1656.1852] <2> bpcd main: immed cmd = /usr/openv/netbackup/bin/bptm -U 1>/dev/null 2>/dev/null\r\n04:15:28.375 [1656.1852] <2> bpcd main: new immed cmd = C:\\Program Files\\VERITAS\\NetBackup\\bin\\bptm.exe -U \r\n04:15:28.437 [1656.1852] <2> bpcd main: completed command\r\n04:15:28.437 [1656.1852] <2> bpcd main: immed cmd status = 0x0\r\n04:15:28.437 [1656.1852] <2> bpcd main: immed cmd status = 0\r\n04:15:28.437 [1656.1852] <2> bpcd main: BPCD_DISCONNECT_RQST\r\n04:15:28.437 [1656.1852] <2> bpcd exit_bpcd: exit status 0  ----------->exiting\r\n04:15:52.750 [1468.1928] <2> bpcd main: offset to GMT -28800\r\n04:15:52.750 [1468.1928] <2> bpcd main: Got socket for input 500\r\n04:15:52.750 [1468.1928] <2> logconnections: BPCD ACCEPT FROM 10.0.1.78.917 TO 10.0.1.78.13782\r\n04:15:52.750 [1468.1928] <2> bpcd main: setup_sockopts complete\r\n04:15:52.781 [1468.1928] <2> bpcd peer_hostname: Connection from host jz-t630 (10.0.1.78) port 917\r\n04:15:52.781 [1468.1928] <2> bpcd valid_server: comparing jz-t630 and jz-t630\r\n04:15:52.781 [1468.1928] <4> bpcd valid_server: hostname comparison succeeded\r\n04:15:52.781 [1468.1928] <2> bpcd main: output socket port number = 702\r\n04:15:52.781 [1468.1928] <2> bpcd peer_hostname: Connection from host jz-t630 (10.0.1.78) port 917\r\n04:15:52.781 [1468.1928] <2> bpcd main: Peer hostname is jz-t630\r\n04:15:52.781 [1468.1928] <2> bpcd main: Got socket for output 700, lport = 931\r\n04:15:52.781 [1468.1928] <2> bpcd main: Connected on output socket\r\n04:15:52.781 [1468.1928] <2> bpcd main: Duplicated socket on stderr\r\n04:15:52.781 [1468.1928] <2> bpcd main: <---- NetBackup 5.0GA 0 ------------initiated\r\n04:15:52.781 [1468.1928] <2> bpcd main: Not using VxSS authentication with scjz-t630\r\n04:15:52.781 [1468.1928] <2> bpcd main: BPCD_HOSTNAME_RQST\r\n04:15:52.796 [1468.1928] <2> bpcd main: BPCD_DISCONNECT_RQST\r\n04:15:52.796 [1468.1928] <2> bpcd exit_bpcd: exit status 0  ----------->exiting”

论坛徽章:
0
发表于 2007-01-12 09:44 |显示全部楼层
问题很简单,是windows上的media server的进程权限不够。要把启动权限改到最大。

论坛徽章:
0
发表于 2007-01-12 09:51 |显示全部楼层
windows上的media server的进程我都己经改为administrator启动,进程权限应该如何改啊?请maping老大指定,谢谢

论坛徽章:
0
发表于 2007-01-12 16:09 |显示全部楼层
1. Open the VERITAS NetBackup (tm) Administration console\r\n2. Open NetBackup Management\r\n3. Open Host Properties\r\n4. Select Master Server\r\n5. On the right side, select the master server, right-click and select Properties\r\n6. Select the Servers tab\r\n7. Under Global Operations: Add to all lists, add the name of the media server and click the \"+\" button\r\n\r\n8. Select the Media Servers tab\r\n9. Under Global Operations: Add to all lists, add the name of the media server and click the \"+\" button\r\n\r\n10. Click OK to close the properties\r\n11. Stop and start the NetBackup services on both, the master server and the media

论坛徽章:
0
发表于 2007-01-12 16:21 |显示全部楼层
谢谢maping\r\n感动之极.................

论坛徽章:
0
发表于 2007-01-12 16:23 |显示全部楼层
原帖由 smallants 于 2007-1-12 16:21 发表\r\n谢谢maping\r\n感动之极.................
\r\n

论坛徽章:
0
发表于 2007-01-12 16:56 |显示全部楼层
maping ,我再问个问题,master和media server之间的通讯如果有防火墙需要打开哪些端口?

论坛徽章:
0
发表于 2007-01-14 17:35 |显示全部楼层
软件安装好后,关于端口的信息你可以到/etc/services文件中查看相应的信息。

论坛徽章:
0
发表于 2007-01-14 21:26 |显示全部楼层
问哈子哦,Media Server安装前后,主机名字是否有改变过呢???????
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP