好像不行

偶最近也在到处请教，但结果好像不太乐观，似乎不行。有进展望转发我一个。谢谢，共同进步！

实战分享：从技术角度谈机器学习入门| 【大话IT】RadonDB低门槛向MySQL集群下战书 | ChinaUnix打赏功能已上线！ | 新一代分布式关系型数据库RadonDB知多少？

North

稍有积蓄

论坛徽章:: 0

3楼 [报告]

发表于 2003-07-06 05:27 |只看该作者

Perhaps you can\'t do it.

The followings are from Microsoft:\r\n________________________________\r\nNetwork Requirements for Cluster:\r\n\r\nA unique NetBIOS cluster name. \r\nFive unique, static IP addresses: two for the network adapters on the private network, two for the network adapters on the public network, and one for the cluster itself. \r\nA domain user account for Cluster service (all nodes must be members of the same domain). \r\nEach node should have two network adapters—one for connection to the public network and the other for the node-to-node private cluster network. If you use only one network adapter for both connections, your configuration is unsupported. A separate private network adapter is required for HCL certification. \r\n________________________________________\r\nHardware Requirements\r\n\r\nThe hardware for a Cluster service node must meet the hardware requirements for Windows 2000 Advanced Server or Windows 2000 Datacenter Server. These requirements can be found at the Product Compatibility Search page. \r\nCluster hardware must be on the Cluster Service Hardware Compatibility List (HCL). The latest version of the Cluster Service HCL can be found by going to the Windows Hardware Compatibility List and then searching on Cluster. \r\nTwo HCL-approved computers, each with the following:\r\n\r\nA boot disk with Windows 2000 Advanced Server or Windows 2000 Datacenter Server installed. The boot disk cannot be on the shared storage bus described below. \r\nBoot disks and shared disks must be on separate SCSI channels (SCSI PathID); separate adapters (SCSI PortNumber) are not required. Thus, you can use a single multi-channel SCSI or Fibre Channel adapter for both boot and shared disks. \r\nTwo PCI network adapters on each machine in the cluster. \r\nAn HCL-approved external disk storage unit that connects to all computers. This will be used as the clustered disk. A redundant array of independent disks (RAID) is recommended. \r\nStorage cables to attach the shared storage device to all computers. Refer to the manufacturers’ instructions for configuring storage devices. If an SCSI bus is used, see Appendix for additional information. \r\nAll hardware should be identical, slot for slot, card for card, for all nodes. This will make configuration easier and eliminate potential compatibility problems.