那位老大指点一下Cisco Works2000的配置

yhd8980

设置Campus Manager 3.1 登录网管系统。选择菜单“Server Configuration”-“Setup”-“ANI Server Admin”-“SNMP Settings”，对照说明将脚本中的Read及Write Community String更改为本网中使用的值。\r\n \r\n我的路由器地址：10.129.0.98\r\nsnmp配置：\r\n \r\nsnmp-server community nms RO\r\nsnmp-server community yhd RW\r\nsnmp-server location NEIMEN \r\nsnmp-server contact person tel: 04716269449\r\nsnmp-server enable traps config\r\nsnmp-server enable traps entity\r\nsnmp-server enable traps bgp\r\n \r\n \r\n那这个脚本应当啥写：\r\n# Enter the community string using this syntax:\r\n#       target:read_community::timeout:retries:::write_community\r\n#\r\n# You must be sure to keep the correct number of colons between entries. \r\n# If you add or delete colons,  the ANI Server will NOT be able to properly read the community strings.\r\n#\r\n# To verify that you are entering valid community strings, use the online help for guidance.\r\n \r\ntarget:read_community::::::write_community\r\n多谢指教。\r\n