Cisco2600升级IOS时遇到的一个问题

leslie_sheng

这是一个我跟mentor去给 Cisco2600升级IOS时遇到的一个问题,共享给大家。\r\n1，给笔记本配置和CISCO相同网段的IP，连接到CISCO；\r\n2，Use TFTP server backup the configuration；\r\n   #copy running-config tftp   ***用text格式打开此文件检查配置是否正确***\r\n3，#copy tftp flash\r\n     Address or name of remote host []? 10.10.10.2 ***笔记本IP***\r\n     Source filename []? c2600?i?mz.121?14.bin\r\n     Destination filename [c2600?i?mz.121?14.bin]?y\r\n     Accessing tftp://10.10.10.2/c2600?i?mz.121?14.bin...\r\n     Erase flash: before copying? [confirm]y\r\n     Erasing the flash filesystem will remove all files! Continue? [confirm]y\r\nErasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee\r\neeeeeeeeee ...erased\r\nErase of flash: complete\r\nLoading c2600?i?mz.121?14.bin from 10.10.10.2 (via Ethernet0/0): !!!!!!!!\r\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\r\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\r\n!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\r\n!!!!!!!!!!!!!\r\n***%SYS-2-MALLOCFAIL: Memory allocation of 32 bytes failed from 0x8034A70C, alignment 0 \r\nPool: Processor  Free: 0  Cause: Not enough free memory \r\nAlternate Pool: None  Free: 0  Cause: No Alternate pool ***失败 \r\n4，关机，插拔一下电源线。\r\n5，开机，自动flash ok.

gyog

查一下\r\nflash和dram多大