cisco 2501 启动问题

detailtoo

一台2501，通过console口登陆，启动如下：\r\nCisco Internetwork Operating System Software \r\nIOS (tm) 3000 Software (IGS-IN-L), Version 11.1(, RELEASE SOFTWARE (fc1)\r\nCopyright (c) 1986-1996 by cisco Systems, Inc.\r\nCompiled Thu 05-Dec-96 12:21 by tamb\r\nImage text-base: 0x03023618, data-base: 0x00001000\r\n\r\ncisco 2500 (68030) processor (revision N) with 2048K/2048K bytes of memory.\r\nProcessor board ID 05551290, with hardware revision 00000000\r\nBridging software.\r\nX.25 software, Version 2.0, NET2, BFE and GOSIP compliant.\r\n1 Ethernet/IEEE 802.3 interface.\r\n2 Serial network interfaces.\r\n32K bytes of non-volatile configuration memory.\r\n8192K bytes of processor board System flash (Read ONLY)\r\n\r\n\r\n\r\nPress RETURN to get started!\r\n\r\n\r\n%LINK-3-UPDOWN: Interface Ethernet0, changed state to up\r\n%LINK-3-UPDOWN: Interface Serial0, changed state to down\r\n%LINK-3-UPDOWN: Interface Serial1, changed state to down\r\n%LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to down\r\n%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to down\r\n%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state to down\r\n%LINK-5-CHANGED: Interface Serial1, changed state to administratively down\r\n%SYS-5-CONFIG_I: Configured from memory by console\r\n%SYS-5-RESTART: System restarted --\r\nCisco Internetwork Operating System Software \r\nIOS (tm) 3000 Software (IGS-IN-L), Version 11.1(, RELEASE SOFTWARE (fc1)\r\nCopyright (c) 1986-1996 by cisco Systems, Inc.\r\nCompiled Thu 05-Dec-96 12:21 by tamb\r\n\r\n\r\n理论上下面应该出现router> 显示符号，但是这台2501不显示，无论敲什么键都没有反应，好像死机一样，\r\n路由器坏了吗？ 查看启动提示，好像也没有什么问题，请高手指教。

detailtoo

关键现在是 按住 CTRL+BREAK 都不能进去 设置模式啊  \r\n\r\n命苦啊  \r\n\r\n怎么能传 ios呢？\n\n[ 本帖最后由 detailtoo 于 2006-12-31 21:00 编辑 ]