cisco 7507报错自动重启,附报错信息,请各位看看是什么原因.

cqtnt

cisco 7507报错自动重启,附报错信息,请各位看看是什么原因.\r\n\r\n\r\nCisco IOS Software, RSP Software (RSP-ISV-M), Version 12.3(14)T6, RELEASE SOFTWARE (fc2)\r\nTechnical Support: http://www.cisco.com/techsupport\r\nCopyright (c) 1986-2006 by Cisco Systems, Inc.\r\nCompiled Thu 05-Jan-06 09:02 by dchih\r\nROM: System Bootstrap, Version 12.0(10r)S1, RELEASE SOFTWARE (fc1)\r\njginternet uptime is 1 hour, 2 minutes\r\nSystem returned to ROM by bus error at PC 0x404F1FD0, address 0x31372D35 at 07:29:16 beijing Tue Apr 3 2007System restarted at 15:55:34 beijing Mon Apr 2 2007\r\nSystem image file is \"slot0:rsp-isv-mz.123-14.T6.bin\"\r\nCisco RSP8 (R7000) processor with 262144K/8216K bytes of memory.\r\nR7000 CPU at 250MHz, Implementation 39, Rev 2.1, 256KB L2, 2048KB L3 Cache\r\nLast reset from power-on\r\nChassis Interface.\r\n1 VIP4-80 RM7000 controller (2 FastEthernet).\r\n2 FastEthernet interfaces\r\n2043K bytes of NVRAM.\r\n32768K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).\r\n16384K bytes of Flash internal SIMM (Sector size 256K).\r\nNo slave installed in slot 2.\r\nConfiguration register is 0x2102\r\n       最近一个月7507经常报bus error错误,然后就自动重新启动.IOS为Version 12.3(14)T6.路由主要用于NAT转换.请大家帮忙分析一下是什么原因导致报错.是不是路由板卡硬件问题.\r\n       还有一个问题,7507上的模块,比如以太网接口模块,引擎是否可以在7206上使用.

bzzh

You should also consider upgrading the Cisco IOS software release to a version which has a fix for CSCdv68388 - \"Change cache error exception handler to resume not crash\" which has been fixed since Cisco IOS Software Release 12.2(10).